The variant events had almost no frontend tests, and several switch,
paste, token and restore paths never ran.
- Variant property edits (AR) and adding a variant (AS), in both
runners, through the common generators and the dwv events.
- A frontend-only node for the variant management events: transform
(AT), combine (AU), rename (AV), rename in layers, removal of empty
properties and member errors (AW), and the shortcuts (AX). Each
case has copies of the members; direct tests cover the remaining
branches. AV and AT confirm F6: the copies' name sync lands in an
undo entry of its own (pinned).
- Tests for valid-components-for-variants? and valid-variant-switch?.
- The WASM variant switch test is registered in the runner; it never
ran.
- Token apply and remove nodes and case AY. Its undo confirms F55, an
empty :applied-tokens map after undo (pinned). The interpreter waits
for the token, since apply-token opens no pending work (F54).
- A paste-to-root node and case AZ: F17 does not show through paste.
The frontend copy helper merges touched groups as the clipboard
does.
- Switches that carry real geometry, path and text-structure
overrides, resized through a transform.
- Restoring a component whose page was deleted.
A coverage run found sync paths that no test ran. New cases, in both
runners:
- AK: update main into a grid main. With a swapped child the main's
cells keep the copy child's id (F49, pinned).
- AL: update main after renaming the copy root and its child.
- AM: update main of a swap inside a group. The copy child keeps a
swap slot that names a removed main child (F16, pinned).
- AN: a copy flex child's margin override through a main edit, a
reset and update main. The frontend round trip of the main edit
shows F43 with real sizes (pinned).
- AO: a copy dropped into a grid cell of a main. Its undo shows F41
(pinned).
- AP: a library main deletes a middle child.
- AQ: a main change reaches a copy nested in a sub-board.
Also: the frontend interpreter sends the real reset event instead of
installing a file; a test undoes and redoes an undo entry without a
group, which only release builds store; a test confirms F50, a copy
text touched only in :content-group losing its override (pinned).
A review of the suite after the new operations:
- Dead helpers and duplicate nodes go; the lineage reset and swap
nodes are constructors of reset and swap-shape.
- Repeated helpers are shared: grid boards (tho/add-grid-frame,
tho/place-in-grid-columns), n/nested-head-under, n/child-shape,
r/sync-cascade (the benchmark uses it too), the frontend fixture and
fill helpers, and the plugin getMainComponent.
- Runner tests that repeated cases B, C and D go.
- Comments say what the code does, and the wrong ones are fixed.
- Case K's remote edit painted red on red and its unedited variants
asserted nothing; it starts grey and every variant asserts.
- F43 is pinned in one case, AJ, by the value one undo leaves. L, M, Q
and K get real frame sizes, since their pins depended on when the
100 ms layout buffer flushed.
- make-nested-component takes a level count and depth-sweep gives each
depth once, so K, Q, R, T and W stop running depth 1 twice.
- The completion-contract tests no longer depend on fixed pauses or
on how the watcher batches its events.
Benchmark against the baseline (lower quantile): ratios 0.92 to 1.03,
no world flagged.
The coming refactors and fixes change sync code, and a slowdown must be
seen and explained in the commit that causes it. A JVM benchmark now
times component sync on fixed-size worlds:
- one main into 10, 100 and 1000 copies;
- a change in the deepest of three nesting levels;
- a chain of dependents (a in b in c, with copies of each);
- a variant switch in a main with 100 copies;
- a library update into a file with 500 copies.
Each world is built once; only the sync an edit causes is timed, run
to a fixpoint as the frontend watcher does. Each checks its result, so
a world that synced nothing fails instead of timing nothing.
`scripts/bench-components record` writes the baseline, recorded here on
the code before this commit; `scripts/bench-components` compares against
it and exits 1 when a world is more than 10% slower. It compares the lower
quantile: with the devenv running, the mean of the same code moved
from 0.41 to 1.13 of the baseline, the lower quantile by under 12%.
Fill the unit test gaps in common and frontend component code:
- One test per component error code: break a file in one way, check
the codes validation reports, repair it as the backend does (until
valid, at most ten passes) and check what the repair changed.
Pinned: F46 (a dangling ref in a copy child is never reported), F47
and F48 (two repairs that never converge). :component-not-main,
:should-be-component-root and :not-component-not-allowed have no
test, as no file can produce them.
- Library color and typography sync must not touch copies. Both do
(F3): the color sync touches :fill-group, the typography sync
:content-group and :text-content-attribute, and a later main edit of
that attribute then no longer reaches the copy. Pinned.
- Twenty live thf/dump-file calls in common tests go; they printed
whole file trees on every run and asserted nothing.
- The disabled copy-nested-3 frontend test runs again: a stray
backquote quoted its run-store call, so it never called done.
The composable runners could edit, add, remove and move children, swap
and switch, but not run the other component operations. New nodes run
each one through the production generator in the pure runner and the
real event in the frontend interpreter:
- Detach, UpdateMain, DeleteComponent and RestoreComponent;
- Duplicate, and NestCopy (a copy moved into a main);
- EditText, with the automatic rename the text editor applies;
- MoveShape (frontend only, through the sidebar) and MoveToCell;
- swap-shape and reset on any copy head;
- Undo with a step count, and an edit undone before its sync (frontend
only).
New cases, all with the undo/redo round trip:
- Q, R, S, T, U: detach, update main, delete and restore, duplicate
and nest, at nesting depths 0 to 2;
- V, W, X: a new edit after undo, three undos over nested cascades, an
undo before the edit's sync;
- Y: text overrides against main text edits;
- Z: a main child move;
- AA to AF: swap outcomes on values and structure, and the grid cell
of a swapped child;
- AG, AH, AI: the plugin suite's slot alignment cases.
The plugin suite gets OpDetach, OpSwap and OpReset, names that keep
the roles of two nestable components apart, Assert.knownFailure, and
ports of cases Q, AA, AB and K's reset.
Supporting changes: nodes can record what they created
(IAppliedResult); create-component takes a size, since with 0.01
frames the frontend reflows split undo entries at points that depend
on timing (F43); the interpreter ends the text measurement headless,
so text steps settle; tm/known-failure pins the wrong value a known
bug gives in a case assertion; the interpreter no longer moves its
undo baseline after a skipped optional, which cut the end-of-variant
round trip short.
Confirmed and pinned: F12 (resetting a nested swap clears the top
copy's overrides), F27 (the automatic text rename touches
:name-group), F29 (a second switch loses an override) and F44 (a
swapped grid child misses the main's cell changes). F43 also shows
through a plain sync at depth 2 (case Q).
The composable cases tested undo only where a case asked for it, so a
change generator with a wrong inverse, or a step that splits into
several undo entries, went unnoticed.
Both runners now run an undo/redo round trip on every variant, unless
the case turns it off with a reason. After each user step that adds an
undo group, undo must give back the file before the step and redo the
file after it; a user step that adds no group must change nothing. At
the end of the variant, undoing back to the last assembly step and
redoing everything must give back both states. Files compare through
a shared normalizer that drops :modified-at and, on request,
:position-data, and keeps :touched and :remote-synced.
- The pure runner gets a redo stack and a Redo node; a user operation
that pushes a group empties it. Case P undoes and redoes a main edit
in both suites.
- The frontend interpreter runs the round trip through the real undo
and redo events, and checks that each step moves the workspace undo
index by one entry. Each variant starts with an empty undo stack.
A case can mark a failure that a known bug causes. The mark pins, per
phase, the signature of the failure (the shape, page and component
attributes or the undo index that differ). It covers no other failure,
and it fails the case once the bug stops happening.
The check found two bugs, both pinned:
- F41: when sync moves a copy child to an earlier position, its undo
change puts the child back at the same index, so undoing a reorder
in a main leaves the copies reordered (case F).
- F43: the reflow after a swap or variant switch loses the step's undo
group, so its commits land in undo entries of their own and one undo
leaves the step half reverted (cases L and M).
Applying a commit locally rebuilds the object indices of every page its
changes name. Changes that touch no page, such as :mod-component, name
none, and their nil page id was rebuilt too: the file data in the store
gained a page under a nil key holding {:objects nil}. Every component
touch after an edit to a main added it, and undo never removed it.
Rebuild the indices only for the page ids the changes carry.
The composable interpreter treated a step as done after a 60 ms gap
with no commits, and treated its 2 s timeout as done too. Slow sync or
reflow work could finish after the step, so a case could assert on a
half-synced file.
Each event step now waits, as the plugin waitForLayoutUpdate does,
until every pending work tracked by the reflow registry has drained:
the watcher's sync wait, the sync it starts, and layout and text
reflow. A step that does not drain within 2 s fails the test and names
the work still pending, and the next variant starts with nothing
pending.
The tests cover an edit with a deliberately slow sync, undo and redo
steps that must wait for the watcher's touch-component, translation
and derived commits, a sync that never finishes, and a restart of the
edit watchers, which must keep the undo entries of an edit the same.
The component watcher opened its :sync-file wait only for commits saved
to the undo stack. Undo and redo commit without it, so a wait such as
the plugin waitForLayoutUpdate returned before the watcher had handled
them. Translation and derived commits were filtered out before the wait
opened.
Open the wait for every local commit of a file and close it once the
watcher has decided what to do: sync, only touch the component, or
drop the commit. Dropped commits close it right away.
Add wrf/pending, a snapshot of the pending work, for tests and
diagnostics.
The composable test interpreter wired its own copy of the undo stack
subscription and started only the component watcher, so it reacted to
edits differently from the app, and a missing subscription failed
silently.
Gather the subscriptions that react to edits while a file is open
(undo stack, layout updates, text reflow, WASM text measurement) in
initialize-edit-watchers, stopped by finalize-edit-watchers, and the
per-page component and token watchers in watch-library-changes. The
workspace and the interpreter both start them.
Starting the edit watchers again replaces the running ones. A file
reload starts the workspace again without finalizing it, which left two
undo stack watchers running, so an edit added an extra undo entry.
The composable test engine, nodes, setups and cases lived in the
frontend test tree, so only the frontend interpreter could run them.
Move them to CLJC test helpers under app.common.test-helpers.composable
and add a pure runner (comp.runner) that does what the workspace does
around each operation, without the frontend store:
- after a user operation it syncs the changed components until none is
left, as the frontend watcher does with one pass per sync commit;
- the operation and its syncs form one undo group, and the undo node
reverts the latest one;
- it validates the file once the sync or the undo has settled.
Each node declares its kind: assembly, user, undo or frontend-only.
User nodes record the production changes they apply, and the runner
throws when a node breaks that. The swap and switch nodes build their
changes with the production clv/generate-component-swap-in-place.
Rotate and ChangeHeight need the frontend placement step, so the pure
runner rejects them.
The cases are zero-arg functions in comp.cases, shared by the frontend
interpreter and common-tests.logic.composable-sync-test. The latter
runs cases B to M and the new case O, a switch of an overridden copy,
on the JVM and in JS. Case N and the rotation case stay frontend-only.
The variant switch event picked its target variant, and the component
swap event worked out where the new head goes, inside the frontend
events. Code that runs without the frontend store, such as the pure
composable runner, could not do the same switch or swap. The swap and
the switch also checked for nesting loops with two different
functions.
Move them to app.common.logic.variants:
- find-switch-target picks the nearest variant with the requested
value.
- generate-component-swap-in-place builds the swap changes keeping the
old head's index, grid cell and swap-keep-attrs, plus the
keep-touched step when asked.
- swap-nesting-loop? checks that a swap or switch does not nest a
component inside itself. The swap menu, the plugin swapComponent and
the variants-switch event all use it.
The frontend events behave as before, with two exceptions. Switching
to a value no other variant has does nothing, where it threw in
min-key. A swap also updates the layout of the shapes the keep-touched
step adds.
Write down the intended semantics of copies, :touched and component
sync: what counts as an authored or a derived write, the override
rule, and what each operation (edit, rename, sync, reset, update
main, detach, swap, switch, undo) does to touched groups. It also
records the settled decisions on keep-touched switches, deleted main
children, the eager sync cascade, automatic renames, derived changes
on mains, resized copy roots and layout-owned geometry.
Link it from common/core and common/component-data-model.
* 🐛 Render no type attribute on DS buttons used as links
With `to`, button* renders an <a href> but still passed type="button". On
an anchor, type is a MIME type hint, so "button" is invalid HTML. The
type now applies only when the element is a <button> (still "button" by
default).
New "As Link" story with two tests: the link has its href and no type,
and a plain button keeps type="button".
AI-assisted-by: claude-opus-5-5
* 📚 Document the DS button as a link
The Semantics section only said that button* accepts `to`. It now says
when to use it (the control goes to another URL), what it renders (an
<a href> with the button style and no type), how to keep the in-app
navigation on a plain click, and shows the "As Link" story.
AI-assisted-by: claude-opus-5-5
* ♻️ Use a DS icon button for Share in the workspace header
The Share link of the right header becomes an icon-button* with the DS
share icon, like its neighbours (comments, history, viewer). It gets
keyboard focus, a name and the DS tooltip and hover.
It also makes Share visible again on develop: since the share icon
moved to currentColor, the legacy icon drew with the transparent color
of its svg.
The button is 32px wide instead of 28px, so the zoom, comments and
history controls move 4px to the left.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove the share link styles from the workspace header
Delete .share-btn and its svg rule, which no markup uses since Share is
a DS icon button. refactor/ stays only for the menu placeholders.
No visual change (0 px).
AI-assisted-by: claude-opus-5-5
* 🐛 Fix stack overflow when applying a library update
Each shape updated by a component sync added its reg-objects undo change
with (update :undo-changes concat [...]). That wrapped the whole undo list
in one more lazy concat per shape, with the old list at the head. After a
few thousand shapes, walking the list overflowed the stack, which matches
the nested LazySeq frames reported when a library update is applied.
add-update-attr-changes now conjs the reg-objects before the mod-obj, so
undo restores each shape and then recalculates its parents, as redo does.
The trailing reg-objects also recalculated groups after undoing shapes
that the sync added or removed. To keep that, add-shape-to-instance,
add-shape-to-main and remove-shape now add their own undo reg-objects,
conjed before their other undo changes so it runs after them.
Tests cover many calls to add-update-attr-changes, a sync and undo of
many shapes, and undoing a sync that moves, adds or removes a child of a
group in the copy.
Closes#12576
AI-assisted-by: claude-opus-5-5
* 🐛 Test undo of an inverse sync that adds a shape
The previous commit added an undo :reg-objects to add-shape-to-main, so
undoing an "update main component" recalculates the main's groups after
removing the added shapes. No test covered it.
The new test adds a shape at the start of a group in the copy and changes
a sibling's fill, runs the inverse sync and undoes it. Without the undo
reg, the main group keeps the bounds of the removed shape.
AI-assisted-by: claude-opus-5-5
* ♻️ Use the DS select for the gradient type in the colorpicker
The Linear / Radial select of the gradient options used the legacy
select. It now uses select* with string ids, converted back to the
gradient type keyword in the handler.
Visible changes: the DS select look (label 1px higher, DS list with
taller rows and the DS check mark, opening 2px lower). The list still
opens inside the colorpicker, so it needs no portal.
The "Create a RADIAL gradient" e2e test picks the type by role instead of
a DOM position that only matched the legacy markup. New ds visual test
"Gradient type select": closed, hover, open and changed.
AI-assisted-by: claude-opus-5-5
* ♻️ Move colorpicker gradient styles off the deprecated styles
gradients.scss now uses DS spacing, sizes, borders, typography and
logical properties, and resolves the --menu-shadow-color alias. The
deprecated import stays only for %input-element: the stop offset input
moves to the DS with the numeric inputs group.
The offset input uses body-small (line-height 1.3 instead of 1.4); the
input keeps its height, so nothing moves. 0px difference against the
previous commit, including a new shot of the whole gradient panel.
gradients.cljs uses an icon-text class that has no rule in this file.
AI-assisted-by: claude-opus-5-5
`critical-info` is the first memory every agent reads, and its
`scripts/ci` entry still described the orchestrator as lint + tests +
format over eight modules. `AGENTS.md` repeated the same incomplete
description in its scripts section.
Both now mention the opt-in production build and list `media-processor`
among the modules.
AI-assisted-by: deepseek-v4.1-flash
`./scripts/ci --build` compiles each module the way production does,
without going through `manage.sh build-bundle`, which wipes node_modules
and reinstalls dependencies. It runs the release commands already
defined per module and reuses existing caches, so a broken release build
(shadow-cljs optimizations, the wasm targets, the backend uberjar,
tsc/typedoc) shows up before a bundle is built.
The task is opt-in and runs last, after lint, test and fmt, so the
default flow keeps its duration. `common` has no build of its own and
reports as skipped. `media-processor` joins as the ninth module, with
its lint skipped and `tsc --noEmit` folded into its build.
All build outputs are gitignored. `scripts/test_ci.py` covers the flag
wiring and one command per module through `--dry-run`; it never runs a
real build.
AI-assisted-by: deepseek-v4.1-flash
pnpm 12.5.1 -> 12.16.1: the tarball pin of docker/devenv and of the
media-processor, exporter and mcp images, the packageManager field of
every workspace manifest, and the lockfile metadata of the 11
workspaces. The new pnpm also normalizes one engine range per lockfile
(>=18.* to >=18).
node 24.21.0 -> 24.22.2: devenv NODE_VERSION and both NODE_SHA256,
.nvmrc, and the runtime pin of the two plugins-deploy workflows. The
dhi.io image tags stay as they are until their digests are available.
AI-assisted-by: deepseek-v4.1-flash
The script walks the filesystem, so it stamped generated copies too, such
as media-processor/target/package.json: --check counted files git does
not track and failed whenever one of those copies was stale. Prune
target/ like the other generated trees, with a test for it.
Memory: the JDK and ImageMagick image pins have traps the code cannot
show, now in workflow/docker-images; memory-maintenance gains the rule
that a memory must not restate what the code already says; updating-pnpm
notes the lockfile-only refresh.
AI-assisted-by: deepseek-v4.1-flash
Since accounts without a theme follow the system one (#12480), the ds
Playwright project renders the light theme: headless Chromium reports a
light color scheme. Its screenshots stopped matching the ones taken
before, and the app is reviewed on the dark theme. Set colorScheme to
dark for the ds project only; the default and render-wasm projects keep
their behavior.
AI-assisted-by: claude-opus-5-5
* ♻️ Make the profile photo Update overlay a button
The "Update" overlay on the profile photo was a span with an on-click,
so the keyboard could not reach it. It is now a button: it shows on
keyboard focus as well as on hover.
The button centers its line in the circle, so a 4px bottom padding keeps
the label where the span drew it (0px difference).
New ds visual test "Profile page controls": the page at rest, the
overlay on hover and on focus, Save enabled, and the Change email link
on hover.
AI-assisted-by: claude-opus-5-5
* ♻️ Move profile page styles off the deprecated styles
profile.scss imported the whole deprecated module and kept a long copy
of shared settings rules. It now uses the DS tokens, sizes, borders,
z-index and typography. The deprecated import stays only for
%button-primary: the save button is the shared forms submit button.
Deleted selectors that match nothing in profile.cljs: .btn-secondary
(both), .field, .field-title, .field-text, .custom-input,
.custom-select, .two-columns, .subtitle, .notification-icon,
.notification-text, .notification-text-email, .newsletter-subs, the h1,
h3, p and hr rules, the form rule (both forms set their own flex) and the
link hover underline (the global link rule already does it).
Typographies: the page title uses title-large (line-height 1.4 instead
of 1.15), the Change email link title-small (line-height 1.2 instead of
the default), and the Update overlay title-large with its own
line-height.
Visible change: the taller title line moves the title 3px down and the
rest of the page 6px down. Nothing else changes.
AI-assisted-by: claude-opus-5-5
* ♻️ Give the profile page links, title and photo classes
The links and the profile photo get their own classes instead of bare
a and img selectors, and the page title uses the DS heading with
title-large (it already used that typography). The link wrapper drops
a class with no styles, and the rule for the file input goes: the
shared uploader hides that input inline, so the rule did nothing. No
visual change.
AI-assisted-by: claude-opus-5-5
* 💄 Use one DS typography and the accent color for the profile links
"Change email" took title-small from its container, overridden by the
global link styles (14px, weight 500), and "Want to remove your account?"
had no typography and inherited 16px. Both links now use body-medium and
--color-accent-primary, as design asked in the review.
The "Change email" line is taller with the 1.4 line height, so Save
settings and the link below it sit 3px lower.
AI-assisted-by: claude-opus-5-5
* ♻️ Move devenv-only tools to a separate folder
* 🎉 Add an MCP feedback channel
Add a user-approved feedback tool and an MCP-token-authenticated backend
endpoint that queues plain-text email. Enable the tool through the
configured backend URI in both local and multi-user mode.
Validate subject and feedback limits, enforce per-profile rate limits,
and document configuration. Cover authentication, queueing, tool
availability, and failure handling with backend and MCP tests.
Closes#12490
AI-assisted-by: gpt-6
* ♻️ Move MCP feedback submission into RPC
Use the standard RPC wrappers for feedback and remove the dedicated
HTTP endpoint, route wiring, and custom rate limiter.
Restrict MCP tokens to opted-in routes and commands. Add a shared RPC
call helper to the MCP backend client and adapt the existing tests.
AI-assisted-by: gpt-6
* 🐛 Harden MCP feedback auth, validation and messages
Accept MCP tokens when either the mcp or the access-tokens flag is on, so
instances that enable MCP without personal access tokens can send
feedback. Personal tokens still need access-tokens. Keep the issuer in one
constant, decode tokens without raising to reject unknown issuers, and
name the issuer and type checks.
Reject control characters in the subject, and in the feedback all but
tabs and line breaks, in both the command and the tool, so a NUL answers
400 instead of failing when the mail job is stored. Answer 403 with
profile-blocked or profile-not-active for unusable profiles, record only
who sent feedback in the audit event, and add doc metadata.
Replace on OAuth approval an MCP token issued before MCP tokens had their
own issuer, or one this instance cannot decrypt, since the backend rejects
both.
In the MCP server, mention disabled access tokens on 401, drop the unused
503 case, and say that delivery happens in the background. Document the
flags in the README.
AI-assisted-by: claude-opus-5-5
* 📚 Document the MCP feedback tool and MCP token rules
List submit_feedback among the MCP tools and add an MCP feedback section to
the configuration guide covering PENPOT_MCP_BACKEND_URI,
PENPOT_MCP_FEEDBACK_EMAIL, the flags and the email settings. Add commented
examples of both variables to the compose file.
In the agent memories, record when OAuth approval replaces an MCP token,
how the MCP server reaches the backend, and which flags, routes and
commands accept MCP tokens.
AI-assisted-by: claude-opus-5-5
Sass adds @charset "UTF-8" to every module with non-ASCII characters,
and concatSass joined the modules as they came, so main.css carried it
in the middle of the file. Browsers only honor @charset as the first
rule, and the server sends text/css with no charset. When the browser
did not take the page encoding for the stylesheet, it read main.css as
Latin-1 and CSS content such as the bullet of the library element
counts showed as "•".
Drop every @charset while joining the modules and put one at the start.
Closes#12677
AI-assisted-by: claude-opus-5-5
A numeric input that can be scrubbed sets the ew-resize cursor on its
wrapper, and the token dropdown renders inside that wrapper, so the
whole list inherited the scrub cursor. Give the options dropdown the
default cursor, so it never takes the cursor of the control that opens
it.
AI-assisted-by: claude-opus-5-5
* 🐛 Stop thumbnail subscribers re-rendering on every store change
A thumbnail loaded from the server keeps a media id as :uri, and
workspace-thumbnail-by-id resolves it into a new map on each read. The
ref compared values with identical?, so every root frame, every
component in the assets panel and the interactions layer re-rendered
on every store change, mouse moves included. Compare by value instead.
This does not loop by itself, but it adds work to every commit and
brings other update loops closer to React's limit.
Relates to #12580
AI-assisted-by: claude-opus-5-5
* ✨ Report update loops throttled by the update scheduler
When the scheduler throttles an update loop, it only logs a console
warning, so a loop that no longer crashes leaves no trace. Send an
error report too, with the events in flight and the last events, at
most once per report window.
Relates to #12580
AI-assisted-by: claude-opus-5-5
* 🐛 Report throttled update loops as unhandled exceptions
The throttled update loop report used the handled-exception event, which
only lands in the audit log: error reports and alerts read
unhandled-exception and exception-page. A throttled loop is an
application defect (its cause has :type :internal), and the point of the
report is to find those loops, so it is now an unhandled exception.
AI-assisted-by: claude-opus-5-5
* 🐛 Report raw fetch failures as connectivity errors
A fetch that fails outside app.util.http (zip.js, plugins, schema
loads) rejects with a bare TypeError such as "Failed to fetch". It
reached the global handlers and was reported as an unhandled crash,
with no stack and no URL.
The global handlers now wrap the browser's network TypeErrors as
:network (or :offline when the browser says so), so they get the
connection toast and a compact handled report. Response body reads
in app.util.http also wrap a TypeError as :network with the request
uri, as fetch itself already did.
Relates to #12581
AI-assisted-by: claude-opus-5-5
* 🐛 Treat only network TypeErrors on body read as connectivity errors
process-response-type turned every TypeError from a body read into a
:network error, so a bug such as "body stream already read" showed a
connection toast. It now uses network-failure?, which moves to
app.util.http so that both the http client and the global error
handlers share it. Add Firefox's "Error in body stream" message.
Tests now check :offline and :network separately by setting
navigator.onLine, and read-error builds on async/->promise.
AI-assisted-by: claude-opus-5-5
* ♻️ Take the command limits before the root ones in the RPC limiter
The RPC concurrency limiter took the root limiters (the ones every request
passes through) before the ones a command declares, so a request waiting for
the limits of its own command held the root permits of its profile while it
waited: a profile with a pile-up of heavy requests saw its other requests
queue behind them and be rejected with 429.
That order was forced by two commands that entered the limiter from inside
their handler: a command that declares no limits of its own can only take
them deeper than the root ones, so two paths of one profile could take the
same limiters in opposite order and park for good.
The commands declare their limits in their metadata now and their handlers
call the work directly, so no command enters the limiter from inside its
handler and every path takes the limiters in the same order. The root
limiters are appended to the sequence first, so the limits a command
declares end up outermost and are taken first: a request waiting for them
does not hold the root permits of its profile. The photo of a team keeps its
limits, because it declares them now that the helper does not.
A call from inside a handler can only reenter the limits that thread
already holds, and it is refused when it asks for a new one, because that
would take it after the root ones and invert the order against the other
paths. The key of a limit is resolved the same way in every path, so both
paths point at the same limiter and the reentrancy check sees it.
Every entry of the shipped climit.edn declares a queue, so the number of
requests waiting for the same limit is bounded instead of piling up until
the timeout. The production file lives outside the repository and has to be
mirrored to pick them up.
The tests cover the acquisition order of a command with and without limits
of its own, the order of the limits as a whole (a ring of any size fails,
not only a pair in opposite order), the nested call that asks for a limit
the thread does not hold, and the queues and timeouts of the shipped
configuration. The import of a binfile declares its request as multipart in
its test, the way the commands that take an upload map do.
AI-assisted-by: minimax-m3.1-flash
AI-assisted-by: deepseek-v4.1-flash
* 🔧 Keep the commands' limits and the shipped config in sync
`profile-plugin-ops` guarded only an UPDATE on the caller's own profile row,
which the row lock already serializes, so its global cap could only reject a
burst of different profiles toggling plugins. Both commands declare the
by-profile limit alone now, and the example config drops the entry.
A declared id without an entry does not limit anything: `wrap` logs a warning
and runs the handler with no limiter at all, which is how a command ends up
unbounded in production. A test fails now when a command declares an id the
config does not list, and the header of the example says the production file
mirrors the shape and lists every declared id, not the values.
AI-assisted-by: deepseek-v4.1-flash
* 📚 Record that background work is not waited for with a sleep
A long command moved to the background reports its own completion, so
polling it with a sleep inside a foreground command only blocks the session
and the notification arrives anyway. The rule says to keep working on
something else, or to end the response and wait for it.
AI-assisted-by: minimax-m3.1-flash
* 🎉 Add OAuth support for remote MCP connections
Add MCP-specific discovery, client registration, and approval endpoints.
Exchange single-use authorization codes with PKCE for the fixed MCP user
token, enabling MCP and creating the token on approval when needed.
Use self-contained client IDs without new database tables or stored client
records. Keep temporary authorization state in Redis/Valkey.
Accept bearer credentials while preserving query-parameter connections.
Enable OAuth through PENPOT_MCP_AUTH_URI in multi-user mode. Document the
environment variable in the README and implementation details in Serena.
Explain protocol and concurrency decisions in the Clojure code. Cover token
provisioning, OAuth state, client registration, HTTP flows, and the approval
page with tests.
AI-assisted-by: gpt-6
* 🐛 Wait for devenv initialization before starting builds
Docker reports a container as Running as soon as its main process starts,
while the entrypoint may still be preparing the development environment.
manage.sh used that status to launch tmux jobs, allowing frontend builds
to race with ownership changes to /opt/rustup and Cargo setup.
On a fresh container, rustup could fail with Permission denied before the
frontend watcher started. Nginx would later serve the existing JavaScript,
leaving source changes absent from the running app despite restarting
devenv.
Wait for nginx's local health endpoint before launching the jobs. Nginx
starts after entrypoint setup, so its response confirms that setup has
finished. Allow up to 120 seconds and report a timeout without starting
the jobs if initialization does not complete.
Validation: shell syntax and whitespace checks pass.
AI-assisted-by: gpt-6
* ♻️ Share the login modal with MCP authorization
Extract the viewer login modal and its styles into a shared auth
component, retaining the viewer wrapper and its close behavior.
Use the modal on the MCP approval page and preserve the pending request
through login. Closing it clears the saved return URL and shows a
cancellation message without further actions.
Cover return URL handling and cancellation with frontend tests.
AI-assisted-by: gpt-6
* ✨ Show client icons in MCP authorization
Preserve HTTPS logo URLs from client registration and published metadata
and show the icon beside the application name on the approval page.
Ignore unusable URLs and hide failed images without blocking approval.
Update the access description to refer to MCP connections established
from Penpot. Cover logo metadata and approval responses in backend tests.
AI-assisted-by: gpt-6
* 🐛 Follow the system theme when no preference is configured
Default to the system theme in the shared resolver used by the app and
plugins. Preserve explicit light and dark choices, including the legacy
default value that means dark.
Reuse the reactive theme hook in progress widgets and show the system
preference in settings for accounts without a configured theme.
Verify preference resolution with regression tests and browser checks.
All 1,474 frontend tests pass.
AI-assisted-by: gpt-6
* 🐛 Replace expired MCP tokens during OAuth approval
Settings can give an MCP token an expiry date. OAuth approval reused
the newest MCP token without checking it, so an expired token reached
the client and never matched a plugin connection.
Approval now treats an expired token as missing and creates a new one.
Token exchange rejects a code whose token expired after approval with
invalid_grant.
AI-assisted-by: claude-opus-5-5
* 🐛 Log unexpected errors on MCP OAuth endpoints
The OAuth routes sit outside the shared HTTP middleware, so the shared
error handler never saw them, and their own handler turned unexpected
failures into a 503 without logging anything. Failures in the session
middleware of the approval endpoints had no handler at all.
Unexpected failures now also go through the shared error handler for
its logging, while clients still get an OAuth error body. The OAuth
error handler also wraps the session middleware of the approval
endpoints.
AI-assisted-by: claude-opus-5-5
* 🔧 Add devenv script to run the MCP server with OAuth
start-mcp-devenv-oauth starts the MCP server in multi-user mode with
PENPOT_MCP_AUTH_URI derived from PENPOT_PUBLIC_URI, to test OAuth in
the devenv. Agentic tooling still uses the single-user
start-mcp-devenv.
AI-assisted-by: claude-opus-5-5
* 🐛 Fix failing test case
---------
Co-authored-by: alonso.torres <alonso.torres@kaleidos.net>
* ♻️ Use DS buttons and icons in the dashboard fonts page
The fonts page moves off the deprecated icons and raw buttons:
- "Add custom font", "Upload all", "Upload" and "Save" become DS primary
buttons and "Dismiss all" a secondary one.
- The remove, cancel and menu controls of the font rows become ghost DS
icon buttons named "Remove", "Cancel" and "Options"; the menu one
says whether its menu is open. Two of them were spans.
- The delete control of a font style was a span; it is now a button
named "Delete font style" with the DS close icon, still shown only
on hover.
- The warning and empty list icons use the DS icons. The loading
placeholder keeps the legacy loader: there is no DS one.
The font menu offset grows by the 6px the taller menu button added, so
the menu opens where it did. New key: dashboard.fonts.delete-variant
(en, es). A visual test covers a font ready to upload, the style hover,
the font menu and the edition row.
AI-assisted-by: claude-opus-5-5
* ♻️ Move dashboard fonts styles to logical properties
Physical sizes, offsets, margins and paddings become logical properties
and the DS typography module is used without a namespace. The element
selectors (section title, inputs, hero text) stay, with a comment: they
have no class.
The shared dashboard header styles (common-dashboard) still come from
refactor/: ten dashboard modules use them, so they move in their own
change. No visual change.
AI-assisted-by: claude-opus-5-5
* ♻️ Use the DS loader and heading in the dashboard fonts page
The fonts loading placeholder used the legacy loader icon, drawn as an
outline in a 32px box. It now uses the DS loader*, the same animated
pencil as the other dashboard loading screens. Its box is 9px tall,
so the label moves 6px up.
The section title h3 is now a heading* with the title-small typography
and its own class, so the SCSS no longer styles the bare element.
The legacy loader icon has no other use, so its SVG and def are gone.
AI-assisted-by: claude-opus-5-5
* ♻️ Give the dashboard fonts inputs and hero text classes
The font name and search inputs and the hero text get their own
classes instead of bare input and p selectors, and the hero title uses
the DS heading with title-large instead of the global h2 rule. The
title keeps its 24px size and weight; the DS line height (1.4 instead
of 1.15) moves the hero content about 6px down.
AI-assisted-by: claude-opus-5-5
* 🐛 Give the fonts placeholder icon its color back
Removing the legacy loader also removed the .icon svg rule, which gave
the empty placeholder text icon its color, so the icon had none. The
icon now has its own class with the secondary foreground color, and the
wrapper div without styles goes.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove a commented-out selector from the debug shape panel
.shape-info-title was left commented out with a "check by hand" TODO in
#12484. Nothing uses it, so delete it instead of keeping it as a comment.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS typographies in the debug shape panel
The panel text and the shape title only set a font size, with a "no exact
DS typography match" TODO. body-small and body-medium differ from them
only in the line-height, so use them directly and drop the TODOs.
Visible change: the panel lines get the DS line-height (1.3 for the text,
1.4 for the shape title) instead of the browser default, so rows grow a
little taller. The panel is debug-only.
AI-assisted-by: claude-opus-5-5
* ♻️ Use the DS stroke width in the migrated DS icons
The DS icons in the areas already moved to the DS set their own
stroke width (1px, 1.33px or 2.25px) to match the legacy icons. They
now keep the DS stroke width, so some icon lines get slightly thinner
or thicker: copy button, context menu, layer row, comments filter,
assets section, share link, dashboard sidebar, team pages, templates,
team switcher and subscription icons.
AI-assisted-by: claude-opus-5-5
* ♻️ Give the share link page rows a class
The page rows of the share link permissions get their own class
instead of a bare li selector. No visual change.
AI-assisted-by: claude-opus-5-5
* ✨ Add the share, handlers and snap icons to the DS
The share button and the path editing bar could not move to the DS
buttons because their icons were missing from the DS icon set. As agreed
with design:
- handlers-equal, handlers-independent, handlers-mirror and snap join the
DS as they are (their SVGs already follow the DS format).
- share keeps its drawing, moved onto the 16x16 grid as a single path
with no fixed color.
- snap-nodes is deleted: nothing used it, and snap is the icon of the
snap nodes button.
The legacy share button in the workspace header uses the same SVG: its
icon is about 6% smaller and now takes the hover color, which the fixed
stroke color blocked before.
AI-assisted-by: claude-opus-5-5
* 🐛 Show the share icon lines outside the app
The share SVG had no fill or stroke, so plain SVG viewers used the
defaults (black fill, no stroke) and drew only three dots. Set
fill="none" and stroke="currentColor", like settings.svg. The app
already sets both in CSS, so nothing changes there.
AI-assisted-by: claude-opus-5-5
* 🐛 Show the handlers and snap icons right outside the app
Like share, these SVGs had no fill or stroke, so plain SVG viewers
filled the shapes black and drew no lines. Set fill="none" and
stroke="currentColor". The app sets both in CSS, so nothing changes
there.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icon buttons to close the subscription dialogs
The close buttons of the five subscription dialogs (plan management,
success, Nitrate subscription, contact sales and manual cancel) were
raw buttons with no name. They become ghost DS icon buttons named
"Close"; the class that places them in the corner goes on the tooltip
wrapper, so they stay where they were and only show the DS hover.
The plans page link-style buttons stay raw: they have no DS equivalent.
A visual test covers the plans page and the plan management dialog.
AI-assisted-by: claude-opus-5-5
* ♻️ Move settings subscription styles closer to the DS
The settings subscription stylesheet inlines the deprecated
button-style mixin and %button-icon placeholder, resolves its legacy
color aliases and font weight, uses logical properties and the DS
typography module without a namespace. The rules on icon svgs that have
no class keep a comment; two that match nothing (the dropdown arrow svg
and .radio-btns) are commented out with a TODO.
refactor/ stays only for the modal placeholders (%modal-*), which move
with the modals refactor. No visual change.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove unused styles from the settings subscription
The SCSS refactor of the settings subscription left rules commented out
with a TODO because the module does not use them, or because they target
an svg inside a DS icon that is the svg itself. CSS modules scope the
classes to this module and no other source uses them, so they go:
.icon-dropdown svg, .radio-btns, .radio-btns label. No visual change.
AI-assisted-by: claude-opus-5-5
* ♻️ Give the subscription icons classes and drop unused props
Review fixes for the subscription styles:
- The plan icon span sets the letter color with color, not stroke on a
bare svg, and drops fill, stroke-width and color: transparent, which
do nothing on a span.
- The plan icon border uses $b-2 (was 1.75px), so it is 0.25px thicker.
- The letter gets its own class for its 2.25px stroke. With the default
stroke it looks too thin next to the border.
- The open link and editors arrow icons get a cta-icon class instead of
the bare svg selector, and take the button color. The arrow used an
icon-dropdown class with no rule.
AI-assisted-by: claude-opus-5-5
* ♻️ Use the DS stroke width and color in the subscription icons
The plan letter and the member icons keep the DS stroke width (the plan
letter line gets thinner), the member icons set their color instead of
the stroke, and the props copied from the button icon placeholder go.
The success dialog logo gets its own class instead of a bare svg
selector.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icons in the dashboard lists and placeholders
The trash project options button becomes a ghost DS icon button, as in
the projects list, and says whether its menu is open. The search
placeholders, the empty project "create new file" button, the comments
placeholder and the legacy import library tag use the DS icons. The
legacy search icon had no fill rule, so its lens was filled black; the
DS one is not.
Two fixtures make the trash testable: a deleted project, and deleted
files due in 2100 (the existing ones expired in 2024, so the trash
dropped them). A visual test covers the trash row, the empty project
button, the project rename field and the comments placeholder.
AI-assisted-by: claude-opus-5-5
* 🐛 Remove the hidden close control from the dashboard rename field
The rename field of dashboard projects and files had a close control
next to the input that never showed: its legacy icon is drawn with a
stroke, but the styles only set a fill. It could not be reached with
the keyboard or a screen reader, and a click on it did what leaving
the field does: the blur saves the name first, and its handler saved
it too. It only left a pointer cursor over an empty spot. Enter, Escape
and leaving the field keep working as before. No visual change.
AI-assisted-by: claude-opus-5-5
* ♻️ Move dashboard trash, comments and rename styles to the DS
The trash, comments panel and rename field stylesheets resolve their
legacy color aliases, sizes, font sizes, mixins and the menu shadow to
DS tokens and values, and use logical properties. The comments panel
and the rename field no longer import refactor/; the trash keeps only
the shared dashboard header styles (common-dashboard), used by ten
dashboard modules.
Four selectors that the modules do not use are commented out with a
TODO. The comments dropdown z-index (4) has no DS token and keeps a
TODO. No visual change.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove unused styles from the dashboard trash and comments
The SCSS refactor of the dashboard trash and comments left rules
commented out with a TODO because the module does not use them, or
because they target an svg inside a DS icon that is the svg itself. CSS
modules scope the classes to this module and no other source uses them,
so they go: .thread-group, .comments-icon-small, .add-file-btn,
.add-icon. No visual change.
AI-assisted-by: claude-opus-5-5
* 🐛 Use px2rem for the unread dot size in dashboard comments
The unread dot used $sz-8, which the DS sizes do not define, so the
integration bundle build failed. It now uses px2rem(8), the same 8px.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS typography and z-index in the dashboard comments
Review fixes for the dashboard lists styles:
- The comments dropdown title uses the headline-small typography. It
was 11px regular, so it is now 12px medium (larger and bolder).
- The comments dropdown uses --z-index-dropdown instead of a raw 4.
- The rename field selector is the class alone; the input type is not
needed to win over the input defaults (0px change).
The visual test now also captures the whole comments dropdown, so the
title change shows.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove dead rules from the dashboard comments styles
The comments dropdown has no separators, so its hr rule matched
nothing, and the comments icon set the default stroke width. No visual
change.
AI-assisted-by: claude-opus-5-5
