remove-empty-properties, run after a rename in the layers panel, found
the position of each property by grouping all the properties of the
variant's components by name and numbering the groups. A map of more
than eight keys does not keep their order, so with nine or more
properties the numbers did not match the positions and the wrong
property was removed: with ten properties and the sixth empty in every
component, it removed the first (F86).
The positions now come from the properties themselves: a property is
removed when its value is empty in every component. The work moves to
common as clvp/generate-remove-empty-properties, and the event only
commits what it builds.
workspace-variants-test checks the case with ten properties.
AI-assisted-by: claude-opus-5-5
- component-changed marked the component modified and sent
launch-component-sync, its only caller, which opened an undo
transaction around the syncs of the copies. component-changed sends
those events itself, in the same order.
- The library update notification found the libraries that would
change with a lazy filter, so the check ran up to the first one when
the notification was built and the rest when the user clicked
"Update". It is a filterv, so the whole check runs when the
notification is built, as the comment above it says.
- The check that a new name is valid (trimmed, not blank, no trailing
separator) was written in the shape rename and the component rename;
cpn/clean-valid-name gives the cleaned name, or nil.
- Paste and the move of shapes into a parent each tested whether they
put a component head inside a variant; ctn/head-into-variant? does.
- Going to the local main of a component and combining components into
variants each opened another page and ran their work once it was
initialized, with the same stream code; dwl/go-to-page-then does it.
- Making components from the selection mapped the check over the
shapes and then tested every result; every? takes the check.
- generate-components-menu-entries reads the current file and page
with mf/use-ctx, so it is a hook, and called conditionally it would
break the order of its caller's hooks. It is
use-components-menu-entries, and its docstring says why.
The analytics events that paste and duplicate send for each new shape
are built the same way but look up the parent's layout in different
objects, so they stay apart.
No behavior change: the suites are unchanged.
AI-assisted-by: claude-opus-5-5
The clear-thumbnail-batch tests mock the RPC and count every call
recorded while the mock is installed. A thumbnail deletion batch left
over by an earlier test of the suite (a component sync clears the
thumbnails of the frames it changes) can call it in that window, so
the tests failed in the full frontend run from time to time and passed
alone.
- The batch tests count the calls about their own object ids.
- The test that clears an empty queue expected no call at all; a call
made by the event under test could only carry no object ids, so it
checks that none of the recorded calls is such a call.
AI-assisted-by: claude-opus-5-5
- Removing, reordering and setting the value of a variant property
each wrote the component's new properties and then the variant name
of its main, built from them. set-variant-properties does both.
- ctv had two functions that find the position of a property by name;
the private find-index-by-name goes.
- generate-reorder-variant-poperties and the frontend event
reorder-variant-poperties are spelled reorder-variant-properties.
- Nine events of workspace/variants (set the value, the name, the
error, the variant id, add, remove, remove the empty ones, reorder,
and update after a rename in the layers) each looked up the page,
its objects and the file data, built the same empty changes, and
committed them inside an undo transaction. variant-changes builds
those changes, and the transactions go: each one held a single
commit, which already makes one undo entry on its own, or joins the
transaction a caller has open.
No behavior change: the golden masters and the suites are unchanged.
AI-assisted-by: claude-opus-5-5
- The sync walk took its direction as a map of seven closures
(direct-sync, inverse-sync). The two directions are fixed, so each
is now a plain recursive function: sync-copy-recursive (main to
copy, a sync or a reset) and update-main-recursive (copy to main),
with sync-copy-shape and update-main-shape for the pair itself.
Both share compare-children, which takes the children, a pair?
predicate and four callbacks instead of 13 arguments; the inverse
branch's call of the swapped callback, which could never run, goes.
- The container of the main shapes is found once, at the start of the
walk. The walk holds the :remote-synced a reset or an update main
gives the copy shapes, instead of initial-root? and two branches.
add-shape-to-instance and add-shape-to-main take the parent from the
pair being walked instead of searching the whole subtree for it.
- pcb/add-changes takes a container and the redo and undo changes, and
applies them locally. Eight sync functions and the library
typography sync each wrote that block; make-change goes from both
namespaces. One list holds the attributes that link a copy shape
with its main, and one shape-label prints shapes in the log lines.
- change-touched chose what to write from three flags. It is now
set-touched, which takes the value each caller computes. The swap's
restore of the kept properties passes ignore-touched instead of
calling it afterwards to put the groups back.
- generate-sync-shape was a multimethod over the three asset types; it
is a case in generate-sync-container. generate-sync-file loses its
unused arity. The 100-line comment that opened the sync helpers
described an older model; a short note points at the component sync
contract. text-content-with-overrides only called
txt/merge-overrides, which sync and switch now call.
- update-flex-child-copy-attrs and update-flex-child-main-attrs are one
function, update-flex-children, and the omit-touched? argument that
was always false goes.
- In the variant switch, sized-geometry-value builds the resized
:selrect and :points that two geometry policies each built, and a
binding of skip? shadowed by a second one is skip-attr?.
add-shape-to-main keeps two changes that look wrong, now marked F102:
its :reg-objects names the component, so it only reaches a deleted
component's objects, and the undo of its new shapes deletes them from
the copy's page.
No behavior change: the golden masters and the suites are unchanged.
libraries.cljc: 1816 -> 1284 lines.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 15.2 / 0.43
edit-through-a-chain-of-dependents 68.9 / 35.7 / 0.52
library-update-into-copies 83.1 / 40.5 / 0.49
main-edit-among-many-shapes 4.8 / 2.4 / 0.51
main-edit-into-10-copies 1.8 / 0.8 / 0.46
main-edit-into-100-copies 15.4 / 7.8 / 0.51
main-edit-into-1000-copies 153.1 / 97.4 / 0.64
variant-switch-into-copies 32.1 / 17.6 / 0.55
(The machine was busy for the 1000-copies world: its mean was 119 ms,
against about 83 in the runs of the earlier steps, at 0.49-0.52.)
AI-assisted-by: claude-opus-5-5
Which shapes of a copy a transform leaves untouched (the ignore tree)
was frontend code, written twice: calculate-ignore-tree for the
modifiers of the SVG renderer and calculate-ignore-tree-wasm for the
matrices of the WASM renderer. The second is the single-pass version
of the first: each shape still compares itself with the copy root of
the latest transformed shape above it, as the repeated walks did when
the last one won.
app.common.logic.placement now holds it once: calculate-ignore-tree
takes the transformed ids in order and a function that transforms a
shape, built with modifiers-transform (SVG) or matrices-transform
(WASM), both cached per shape. check-delta and transform-attrs moved
with it. The frontend calls the common version, and its tests moved
to common-tests.logic.placement-test, which runs on the JVM and in JS,
with a rotation through modifiers added.
No behavior change: the golden masters and the suites are unchanged.
The benchmark does not run this code.
AI-assisted-by: claude-opus-5-5
update-component-sync and launch-component-sync both emitted the same
pair of sync-file events: the current file, and the library file when
it is another one. component-sync-events builds them for both, each
event keeping its own undo transaction. The two-argument arity of
launch-component-sync had no caller and is gone.
No behavior change: the frontend suite and its golden master are
unchanged. No common code changed, so the benchmark does not apply.
AI-assisted-by: claude-opus-5-5
The namespace held 3,300 lines: component sync, instance creation and
detach, swap and the variant switch's attribute carry, duplication,
and the sync of library colors and typographies. Each now has its own
namespace:
- app.common.logic.libraries (cll): component sync, reset, update
main, attribute and placement sync, and the sync of a file with its
libraries;
- app.common.logic.instances (cli): create, instantiate and restore a
component, detach a copy;
- app.common.logic.swap (clsw): swap a copy head, carry overrides
across a variant switch;
- app.common.logic.duplicate (cld): duplicate components and shapes;
- app.common.logic.library-assets (clla): sync of library colors and
typographies, which the asset multimethods delegate to.
Each new namespace may require libraries, never the reverse; the
helpers they share became public there (attr-operations,
reposition-shape, orient-like, swap-content-root-id, ...). Callers use
the new aliases. The functions move as they were.
No behavior change: the golden masters and the suites are unchanged.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 37.3 / 1.06
edit-through-a-chain-of-dependents 68.9 / 69.7 / 1.01
library-update-into-copies 83.1 / 79.8 / 0.96
main-edit-into-10-copies 1.8 / 1.6 / 0.92
main-edit-into-100-copies 15.4 / 15.4 / 1.00
main-edit-into-1000-copies 153.1 / 156.0 / 1.02
variant-switch-into-copies 32.1 / 27.0 / 0.84
AI-assisted-by: claude-opus-5-5
Before refactoring the component sync code, record the exact files the
component tests produce, so a refactor that changes any of them fails.
The JVM test common-tests.logic.golden-master-test runs every variant of
the composable cases the pure runner runs and every benchmark world. It
records the file after each user, undo and redo step (the runner's new
:observe option), the final files with the signatures of the undo/redo
round trip failures, and each world's file after its timed work. The
frontend interpreter records the store's files of every variant of its
cases and of the completion contract the same way.
app.common.test-helpers.golden-master writes a state as the normalized
files in sorted "path value" lines: ids become test labels, or numbers
in tree order when unlabelled; grid cells are named after their shape
and position; timestamps are left out. So a state is the same in every
run whatever ids it draws. Only a digest per state is committed; the
full lines go to tmp/golden-master/ and tmp/golden-master-frontend/
(recorded/, and actual/ for a state that differs), so diff -r shows a
change. PENPOT_GOLDEN_MASTER=record records them again.
Both sides repeat exactly across runs. Dropping :opacity from the
attributes sync copies fails the case C variants that edit it.
The interpreter's fixture also turns cts/wasm-enabled? off for each
composable test and restores it after, as it already restores the
store. A test that starts the WASM renderer left the flag on, so in a
full frontend run the cases ran on WASM shape proxies, which leave out
the attributes that are nil or false, and the frontend golden master
differed from a run of the cases alone (:flip-x and :flip-y).
AI-assisted-by: claude-opus-5-5
Sync and the variant switch can take a copy text's family from one side
and its weight from the other. The variant id goes with the weight, so
it can name a variant of the other family: the WASM renderer then picks
the closest variant, but the SVG renderer falls back to the regular one.
The frontend now gives each text content that a sync or a component swap
commits variants of its own families: a run whose variant is not one of
its family's takes the family's closest to its weight and style
(cttx/update-font-variants, fonts/find-closest-variant). The pure runner
has no fonts, so case BA leaves variant ids out of its comparison.
The merge also leaves alone a run that already shows the placed style,
so a main edit no longer rewrites the variant ids of a copy whose
family is its own; with a new family, the run still takes the placed
variant id.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 35.7 / 1.01
edit-through-a-chain-of-dependents 68.9 / 65.2 / 0.95
library-update-into-copies 83.1 / 75.1 / 0.90
main-edit-into-10-copies 1.8 / 1.5 / 0.86
main-edit-into-100-copies 15.4 / 15.1 / 0.98
main-edit-into-1000-copies 153.1 / 151.4 / 0.99
variant-switch-into-copies 32.1 / 30.4 / 0.95
AI-assisted-by: claude-opus-5-5
The migration 0033 stores every swap of a file as an override group.
A swap made in a copy is paired with the child of the near main that
holds the same position, as sync paired it; any other slot is dropped.
All pairings are found on the data as it was, so swaps nested in swaps
pair against the content of the outer one, and libraries pair the same
whether they are migrated or not. A head that refers to its own slot
only inherited it, and drops it even when its near main cannot be
reached. Any other slot that matches no child, or whose near main is in
a library that is not loaded, keeps the slot as its ref, so validation
reports it. An import, which migrates its files before it links their
libraries, leaves those slots and converts them once the libraries are
linked. A migrated head that sits elsewhere than the child it replaces
would place it gets its geometry marked as touched, so the first sync
does not move it. Migrated and new files carry the feature
components/swap-group, so a client that still writes slots cannot open
them.
Validation checks the new form: :misplaced-slot reports any slot,
:misplaced-swap-group the group anywhere but on a nested copy head in a
copy, :ref-not-in-near-main a nested copy head whose ref is not a child
of the near main of its parent, and :duplicate-ref two children of a
copy that refer to the same main shape. Each has a repair.
Nothing but the migrations reads slots any more: the slot branches go
from sync, swap, switch, reset, detach, paste, duplicate and move. The
helpers that read and write a slot on a shape move to files/swap-slots,
and the ones that follow refs to files/comp-processors. The graph
projection drops the FillsSwapSlot edge, the components debugger shows
the component a swapped head takes its content from, and the plugin API
documents componentRefShape for a swapped copy. The swap tests are
named after what they check.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 34.6 / 0.98
edit-through-a-chain-of-dependents 68.9 / 63.5 / 0.92
library-update-into-copies 83.1 / 76.4 / 0.92
main-edit-into-10-copies 1.8 / 1.6 / 0.87
main-edit-into-100-copies 15.4 / 15.1 / 0.98
main-edit-into-1000-copies 153.1 / 148.8 / 0.97
variant-switch-into-copies 32.1 / 26.4 / 0.82
AI-assisted-by: claude-opus-5-5
A swapped copy sub-head now keeps the shape-ref of the main child it
replaces (its position), takes its content from its own component, and
carries the touched group :swap-group. It used to point at the root of
the new component and store a swap slot naming the replaced child.
Every path reads and writes that form:
- sync pairs a swapped head with the child it replaces and syncs it
from its own component; it takes from the replaced child only its
placement: position, constraints and layout item attributes;
- reset undoes a swap in place, keeping the head's id and the other
overrides of the copy;
- detach, paste and duplicate make a head that leaves every copy level
a plain copy of its own component, and advance a deeper one by
position; the children of a swapped head never advance;
- a variant switch keeps a swap stored this way, and counts only the
copy's own swap, not one made in a main of the chain;
- update main replaces the main child with a clone of the swapped one,
and from a swapped head updates its own component;
- a swap inside a copy keeps the old shape-ref and adds :swap-group;
swapping back to the component of that position gives a plain nested
copy whose children refer to the position's children; a swap inside
a main is a plain nested copy.
Files that hold swap slots keep working until a migration converts
them. The component memories describe the model.
This fixes what came from the slot: reset of a swapped child cleared
the other overrides of the copy (F12) and gave copies of a main new
ids (F66); update main left a swap mark (F16); a second variant switch
lost the overrides (F29); grid cells did not pair a swapped child
(F44); a swapped child did not follow its position (F65). F49 keeps
failing, in another form.
The tests that asserted slots now assert the override group; the tests
of the slot code build the old form with :as-slot?.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 35.4 / 1.01
edit-through-a-chain-of-dependents 68.9 / 68.7 / 1.00
library-update-into-copies 83.1 / 77.5 / 0.93
main-edit-into-10-copies 1.8 / 1.6 / 0.92
main-edit-into-100-copies 15.4 / 15.4 / 1.00
main-edit-into-1000-copies 153.1 / 151.1 / 0.99
variant-switch-into-copies 32.1 / 32.4 / 1.01
AI-assisted-by: claude-opus-5-5
No components v1 file reaches the code any more: opening one fails the
feature check, and imports reject it or give it the feature. What only
served v1 goes:
- validate-file and validate-file-affected no longer skip a file
without components/v2;
- the root of a deleted component is found by its main instance id
only, in the type helper and the component sprite;
- generate-sync-library, which synced shapes inside live components,
and the live components in containers-seq, so asset usages walk the
pages only (deleted components keep their objects and still sync);
- the unused :components-v2 file option, from the schema, the file
data and the test fixtures; stored files that carry it still
validate;
- the team migration-in-progress check and its frontend alert, which
leaves ephimeral features out of the team comparison;
- the components v2 introduction dialog, its styles and icons, and the
:v2-info-shown profile prop;
- the graphic asset events and builders and the reads of graphics in
the selection (the :add-media, :mod-media and :del-media changes stay,
so stored changes still apply), and the uncalled render-page and
render-components helpers.
AI-assisted-by: claude-opus-5-5
Both binfile importers stored a file without the components/v2 feature
as a v2 file, though its component data was never migrated. Such a file
is now rejected with :file-in-components-v1, the code that opening a v1
file already raises, when it has components or shapes linked to them
(:component-id, :shape-ref or :main-instance). A file without component
data takes the feature and imports as before.
Since every imported file now has the feature before the pending
migrations are registered, the no-op components/v2 migration goes.
The import dialog explains the rejection: the entry says that the file
uses an old type of components that Penpot no longer supports, with its
own text, as errors.deprecated talks about opening a file.
AI-assisted-by: claude-opus-5-5
Add a battery of tests for text overrides in copies.
- A short notation for text content in tests (thtx): paragraphs of
runs with short style names, read back with equal runs joined,
edits in the notation, set-text and set-content through the change
path, and the override rule for texts (override-units), which says
which overrides a copy must hold against its main.
- Sync matrix: every whole-text copy edit against every main edit,
plus the cards of the worked examples, the "Hello world" table, a
token on a copy, typographies and a library color sync. Where the
code differs from decisions (k) to (o), the result is pinned
against F72 to F80.
- Switch matrix: copy edits against variants that differ in letters,
size, color, a new line or a bolded word; F76, F77, F79 and F81
pinned.
- Composable case BA: EditText also edits fills, font family and a
whole text; the copy and the main change different styles, then
reset or update main, in both runners; F72 pinned.
- Editor output: the content the WASM and v1 editors commit when a
copy text is typed into, retyped, split with Enter and has a word
bolded, recorded in the workspace and replayed on a copy. Typing
sets only the text groups and a style change no text override;
F79 pinned on both editors' content.
A review found tests that would pass with what they test broken.
- Runners: both judge one variant at a time, fail a variant with no
assertion and a known-failure mark that applies nowhere, and give
the asserter the state the operations produced. The pure runner
validates the final file and rejects operations of unknown kind.
The frontend interpreter fails a step when the store reports an
event error (Potok only logs it), reports asserter errors against
their case, and stops the watchers that install! starts.
- Nodes drive the real code: a main root rename goes through
end-rename-shape, and the clipboard's advance of nested copies is
one common function, cll/advance-copied-objects, that copy-selected
and both test paths call.
- Cases N, AH, AI, AK, AD, AE, K, C, H, S, AY, I, Y, AX and F check
what they claim; O, R and T get real sizes.
- Stricter common unit tests found F60 (a repair detaches healthy
copies), F61 (a switch drops a fixed-sizing size), F62 (the ref
chain never stops at its target) and F63 (latent); all pinned.
- Frontend library tests: the RPC double records on subscribe, the
dropped commits check that nothing syncs, and the link and share
tests check the events sent.
- Plugin suite: OpSwap and OpDetach throw when the API call did
nothing, and case AB checks that the reset head is an instance of
the original component.
- The composable suite memory records the new rules.
The composable interpreter treated a step as done after a 60 ms gap
with no commits, and treated its 2 s timeout as done too. Slow sync or
reflow work could finish after the step, so a case could assert on a
half-synced file.
Each event step now waits, as the plugin waitForLayoutUpdate does,
until every pending work tracked by the reflow registry has drained:
the watcher's sync wait, the sync it starts, and layout and text
reflow. A step that does not drain within 2 s fails the test and names
the work still pending, and the next variant starts with nothing
pending.
The tests cover an edit with a deliberately slow sync, undo and redo
steps that must wait for the watcher's touch-component, translation
and derived commits, a sync that never finishes, and a restart of the
edit watchers, which must keep the undo entries of an edit the same.
Also in this commit:
- Keep page-less changes from adding a nil page. Applying a commit locally
rebuilds the object indices of every page its changes name. Changes that touch
no page, such as :mod-component, name none, and their nil page id was rebuilt
too: the file data in the store gained a page under a nil key holding
{:objects nil}. Every component touch after an edit to a main added it, and
undo never removed it.
- Check undo and redo of every step in the composable cases. The composable
cases tested undo only where a case asked for it, so a change generator with a
wrong inverse, or a step that splits into several undo entries, went
unnoticed.
- Add operations and cases to the composable component suites. The composable
runners could edit, add, remove and move children, swap and switch, but not
run the other component operations.
- Test component validation, repair and library asset sync.
- Add a component sync benchmark with a recorded baseline. The coming refactors
and fixes change sync code, and a slowdown must be seen and explained in the
commit that causes it.
- Tidy the composable suite and make its cases stricter.
- Test the component sync paths no test reached. A coverage run found sync paths
that no test ran.
- Test variant events, token sync and switch overrides. The variant events had
almost no frontend tests, and several switch, paste, token and restore paths
never ran.
- Test the file and container helpers and the library events. The component
helpers of types/file and types/container and the library events of the
workspace had the lowest coverage left.
The component watcher opened its :sync-file wait only for commits saved
to the undo stack. Undo and redo commit without it, so a wait such as
the plugin waitForLayoutUpdate returned before the watcher had handled
them. Translation and derived commits were filtered out before the wait
opened.
Open the wait for every local commit of a file and close it once the
watcher has decided what to do: sync, only touch the component, or
drop the commit. Dropped commits close it right away.
Add wrf/pending, a snapshot of the pending work, for tests and
diagnostics.
The composable test interpreter wired its own copy of the undo stack
subscription and started only the component watcher, so it reacted to
edits differently from the app, and a missing subscription failed
silently.
Gather the subscriptions that react to edits while a file is open
(undo stack, layout updates, text reflow, WASM text measurement) in
initialize-edit-watchers, stopped by finalize-edit-watchers, and the
per-page component and token watchers in watch-library-changes. The
workspace and the interpreter both start them.
Starting the edit watchers again replaces the running ones. A file
reload starts the workspace again without finalizing it, which left two
undo stack watchers running, so an edit added an extra undo entry.
The composable test engine, nodes, setups and cases lived in the
frontend test tree, so only the frontend interpreter could run them.
Move them to CLJC test helpers under app.common.test-helpers.composable
and add a pure runner (comp.runner) that does what the workspace does
around each operation, without the frontend store:
- after a user operation it syncs the changed components until none is
left, as the frontend watcher does with one pass per sync commit;
- the operation and its syncs form one undo group, and the undo node
reverts the latest one;
- it validates the file once the sync or the undo has settled.
Each node declares its kind: assembly, user, undo or frontend-only.
User nodes record the production changes they apply, and the runner
throws when a node breaks that. The swap and switch nodes build their
changes with the production clv/generate-component-swap-in-place.
Rotate and ChangeHeight need the frontend placement step, so the pure
runner rejects them.
The cases are zero-arg functions in comp.cases, shared by the frontend
interpreter and common-tests.logic.composable-sync-test. The latter
runs cases B to M and the new case O, a switch of an overridden copy,
on the JVM and in JS. Case N and the rotation case stay frontend-only.
The variant switch event picked its target variant, and the component
swap event worked out where the new head goes, inside the frontend
events. Code that runs without the frontend store, such as the pure
composable runner, could not do the same switch or swap. The swap and
the switch also checked for nesting loops with two different
functions.
Move them to app.common.logic.variants:
- find-switch-target picks the nearest variant with the requested
value.
- generate-component-swap-in-place builds the swap changes keeping the
old head's index, grid cell and swap-keep-attrs, plus the
keep-touched step when asked.
- swap-nesting-loop? checks that a swap or switch does not nest a
component inside itself. The swap menu, the plugin swapComponent and
the variants-switch event all use it.
The frontend events behave as before, with two exceptions. Switching
to a value no other variant has does nothing, where it threw in
min-key. A swap also updates the layout of the shapes the keep-touched
step adds.
* 🐛 Require thread access when marking threads as read
mark-all-threads-as-read took any list of thread ids and wrote the read
status of the caller on each of them, without checking that the caller
can access the file that owns the thread. It was the only comment
mutation that did not check permissions, and it took the ids as an
unbounded array, so a single request could keep a database connection
and a transaction open for a long time.
The rpc now resolves the threads in one query and checks the comment
permissions of every distinct file, answering not-found when a thread
does not exist or is not accessible. Both cases answer the same error
on purpose, so the response cannot be used to tell existing threads
apart.
The status rows are now written with a single insert, keeping the
modified-at date one second in the future that makes the thread count
as read. Repeated ids are deduped, the command returns nil again like
the sibling commands with no result, and the schema limits the number
of threads per call to 500 while the dashboard sends the ids in batches
of that size.
Tests cover access rejection, unknown threads, mixed batches that write
nothing, repeated ids, empty lists, marking twice, and the frontend
batch split.
Relates to GHSA-j4vc-cmf6-jhr7
AI-assisted-by: minimax-m3.1-flash
* 🐛 Refresh the unread list when a batch fails
The dashboard sends the thread ids in batches of 500 and each batch
commits on the server. A failure in a later batch left the unread list
stale: the re-read only ran when every batch succeeded, so the threads
already marked as read stayed visible as unread.
The re-read now runs in both paths. On failure the event is emitted
before the error is propagated, so the error toast still shows and the
success toast stays limited to a full success.
The backend also answers an empty list without opening a transaction,
since there is nothing to check and nothing to write.
Relates to GHSA-j4vc-cmf6-jhr7
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Restrict the team invitation token and list to admins
The token of a team invitation is a bearer credential: whoever holds it
accepts the invitation with the role of the invitation row. The RPC that
mints it only required edition permissions, while the rest of the
invitation commands require admin, so a team editor could get the token of
any pending invitation, including the ones that grant the owner role.
The token now requires admin, and the token of an owner invitation is
restricted to the team owner: an admin cannot create nor promote an owner
invitation, so it cannot keep its token either. It reuses the error code
already used for that rule.
Minting the token now leaves an audit event named as an action, carrying
the granted role and the id of the invitation, so the extraction does not
go unnoticed.
The list of pending invitations is admin only as well: it carries the
email of the invited person and the role offered, and the dashboard was
painting those emails to any member. The frontend catches the permission
error and shows the permission notice instead, and the copy action is not
offered for an owner invitation, which the backend rejects for an admin.
The five invitation commands now answer with the same permission error,
so they speak one language.
Relates to GHSA-4mmc-j8rh-74pf
AI-assisted-by: minimax-m3.1-flash
* 🐛 Clear the cached invitations and gate the list on team admin
The pending invitations are a team admin only list. The dashboard still
offered the entry to every member and keyed the section on the invite
policy of the organization, so a team admin blocked by that policy saw
the no-permission notice although the backend lets them list.
- `fetch-invitations` answers a denied refetch with an
`invitations-fetched` event carrying an empty list, so a demoted admin
does not keep the cached emails and the header no longer paints the
invite button from a stale list.
- The header tabs and the team options dropdown hide the invitations
entry without `:is-admin`, which already includes the team owner.
- `invitations-section-content` keys the section on `:is-admin`, and the
invite policy only gates the invite actions: resending keeps the
`can-invite?` check, deleting and row selection only need team admin.
AI-assisted-by: deepseek-v4.1-flash
The Playwright config gives the retrying expects 40 seconds on CI and 5
seconds elsewhere, but the default and ds projects set their own expect
block for the screenshot tolerance, and a project block replaces the
top-level one instead of merging with it. On CI those projects have run
with Playwright's 5 second default.
That is too short for the first dashboard load on a busy runner, where the
dashboard module is fetched lazily: specs that wait for the dashboard
heading time out and pass on the retry (flaky), or fail after the
retries. In the shard of one recent run that was 7 flaky and 4 failed
specs out of 112, and develop itself failed the same families of specs on
several runs the same day.
Name the timeout once and repeat it in both projects. A probe config that
imports this one and polls a condition that never holds reports 40000 ms
for both projects with this change, and 5000 ms without it. The
render-wasm project already repeats its own value.
AI-assisted-by: claude-opus-5-5
AI-assisted-by: claude-sonnet-5-5
Signed-off-by: Filip Sajdak <filip.sajdak@siili.com>
team-container* called mf/deref only after returning early for a team id
that is not a uuid. When the same component rendered once without a team
id and then with one, the number of hooks changed between the two renders
and React threw "Rendered more hooks than during the previous render"
(error #310), which sent the user to the internal error page. The reverse
order throws "Rendered fewer hooks than expected".
Call the hook on every render and keep the uuid check in the condition
that builds the providers.
Two tests mount the component in jsdom and render it with a team id that
arrives and with one that leaves; both fail without this change.
Closes#12728
AI-assisted-by: claude-opus-5-5
AI-assisted-by: claude-sonnet-5-5
Signed-off-by: Filip Sajdak <filip.sajdak@siili.com>
When components whose name matches the variant container are moved into
it, removing the container name leaves an empty value. Combining several
components named the same produced "Value 1" for the first variant and
empty values for the rest, so variants shared the same combination.
Assign the first unused "Value N" to the last property when all computed
values are blank, tracking values given within the same batch.
Combine moves the remaining mains into the container one at a time, in
the combine order, so the generated values follow that order instead of
the layer order.
Closes#12878
"Add to an organization" in the team settings opens a modal but was an
<a> without href: the keyboard could not reach it. It is now a
<button type="button"> that keeps its text-link look (accent color,
medium weight, underline on hover, the same box), so Tab reaches it and
Enter or Space opens the modal.
New visual test "Shows the Add to an organization link", with fixtures
for a team in no organization and an organization the user belongs to:
0 px of difference at rest and on hover, and 0 px on the whole settings
page.
AI-assisted-by: claude-opus-5-5
* ⚡ Keep the translation flag on undo and redo of a move
Previously undos and redos always forced a component sync + thumbnail
rerender for every component touched even if the underlying commits were just
translations. This propagates the translation flag to undos and redos and
propagates it to commit-changes. An entry merged from several undos/redos is
a translation only if all of its undos/redos are translations.
This reduces a UI freeze when undoing a move of a board with 453 components
from 2.42s -> 0.22s.
AI-assisted-by: claude-sonnet-5-5
* :translation? -> :translation
---------
Co-authored-by: Andrey Antukh <niwi@niwi.nz>
* ⚡ Send objects-map pages to the worker without a second encode
When switching between pages on a large file e.g Material Design Icons, there's
some UI freeze from :index/initialize encoding object map shapes to send to the
worker. An objects map already stores the encoded JSON for each shape, and
`encode-str` was wrapping those strings in a second layer of JSON on the main
thread.
We can just transmit the already encoded JSON in a js/Map alongisde the
payload, similar to :blob, so structured clone just copies the strings verbaitm
without re-encoding. To do this this PR adds two functions to ObjectsMap that
converts to and from a js/Map.
The "Main components" page of the Material Design Icons has ~30k objects, so
this reduces the freeze when switching pages from 306ms -> 189ms (1.63x) on a
release build.
AI-assisted-by: claude-sonnet-5-5
* Split property tests out into new deftest
---------
Signed-off-by: Luke Lau <luke_lau@icloud.com>
Co-authored-by: Andrey Antukh <niwi@niwi.nz>
* 🐛 Return the full profile from the LDAP invitation branch
The invitation branch responded with only {:invitation-token token},
so the session start received a map without id or auth-backend. With
the new auth-origin vocabulary that map fails validation and the login
breaks in development and tests; in production the event would be
emitted without a channel.
Return the profile plus the token, like the regular branch, and cover
both branches with RPC-level tests.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Mint an auth token in the OIDC callback with the invitation inside
The callback used the invitation JWE as the session token, so the
frontend landed directly on token verification and never ran the
regular session start: no signin event, no teams, no host hook.
Always mint an :auth token and carry the invitation in its claims.
Token verification returns the claims verbatim, so login-from-token
attaches the invitation to the profile and logged-in does the rest,
the same pattern the verify-email token already uses.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* ✨ Keep the session origin in the telemetry shadow rows
The anonymisation filter drops every string unless it is on a short
allowlist. Add source and activation next to lang and auth-backend so
the shadow copy keeps them; the email and the full name are still
dropped and the email domain is still derived from the email.
The filter keeps its two bindings: the transducer discards everything
that is not a UUID, a boolean or a number, so the allowlist is applied
on the filtered map, never on the raw props.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* ✨ Describe the signup outcome with activation, not with action
The three success branches of register-profile labelled a new account
as "login", "email-verification" or "accept-invitation", so the event
contradicted its own name and the value only lived in context, where
the analytics consumers never read it.
Add activation to the event props and drop action from those branches:
the name already says it is a signup, and a constant action would only
add noise. The retry branches keep their action in context because
there it distinguishes four different outcomes.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* ✨ Describe the session origin in the signin event
The event carried the profile but never said why the session started:
the only field that tried was frontend metadata that never leaves the
browser, and several flows filled it with the wrong value.
Add a small closed vocabulary (source, auth-backend, activation,
from-invitation) and compose it from the profile when signin is
emitted. The assertion fails in development and tests and is elided in
the release build, so a bad value cannot break a real login.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* ✨ Emit the session origin from every login entry point
The four emitters stamped a free-form string as metadata, so the
session event could not rely on it: two flows that were signups wrote
the same value as a login.
Route them through origin-meta: password and LDAP logins declare
source login, register declares source register with activation
immediate, and login-from-token derives both from the token issuer:
:auth for a login and :verify-email for a signup that needed the
email confirmation.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Send the invitation signups through the regular session start
Registering from a team invitation link navigated by hand to token
verification, so the session start never ran: no signin event, no
teams, no host hook. The same navigation was copied in four places.
Teach login-from-register to carry an optional invitation token,
extract the profile decoration into with-register-origin, and call it
from the four sites instead of the hand-written navigation.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Resolve the invitation without waiting for the teams
Registering from an invitation link now goes through the session
start, and that start only navigates after the teams request
completes. fetch-teams has no error handling, so a network failure
there would leave the invitation unaccepted and the user on the signup
screen with a session already minted.
Move the invitation navigation out of the teams path: it emits as soon
as the profile carries a token, and the teams path emits nothing for
an invited profile so it cannot move the user away from the token
verification screen.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* 📚 Document the session origin vocabulary and the invitation flow
Add a focused memory with the four fields, where each value comes from,
the table of flows, the LDAP exception and the invitation path through
logged-in, and link it from the frontend routing.
Update the audit-log memory: source and activation are now on the
telemetry allowlist, activation lives in props and action only exists
on the retry rows.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* 📎 Cover the invitation session start and fix the auth memories
The invitation flows and the token decoration in login-from-token were
only covered by helper tests, so removing the guard that keeps the
teams path from navigating, or the token attach, broke the behaviour
silently.
Run the events through ptk/watch with a teams-fetched event as input:
an invited profile navigates to the token verification screen and
never to the dashboard, and the signin keeps from-invitation. Add the
login-from-token cases with and without the token, and fix the memory
statements about action, the flow table and from-invitation.
Closes#12849
AI-assisted-by: deepseek-v4.1-flash
* ⚡ Compute text fonts once per shape when uploading to wasm
* ⚡ Write the shapes batch in place and coerce fills once
* 🐛 Free the upload buffer when a batch record write fails
A view URL without a page-id crashed builds with assertions enabled:
the viewer passes a nil page-id to `initialize`, whose schema accepted
a missing key but not a nil value. Release builds skip that check and
draw the first page, but every viewer event reads the page from the
route, so zoom to fit and fill, the next-board arrow, Navigate To
interactions, and comment pins did not work.
`initialize` now accepts a nil page-id, `fetch-bundle` makes it
optional, and `bundle-fetched` replaces a route without page-id by one
naming the file's first page. The viewer then initializes again on the
completed route, as it does when the user changes page. A file with no
pages keeps its route.
AI-assisted-by: claude-opus-5-5
Signed-off-by: Álvaro Tejero Cantero <alvorithm@teje.ro>
* 🐛 Normalize stored SVG attribute keys to kebab-case
The v3 reader already emits kebab-case keys, but birth stored the
camelCase React prop names, so import and export never converged:
fill rules painted wrongly and filter defs lost their blur.
Birth now normalizes every stored attribute key to kebab-case
through the `svg-props` whitelist (`attrs->kebab-props`), applied on
all element paths of the svg importer, on the file builder and on
defs. svg-raw `:content` is kebab-ized in spelling only and keeps
unknown keys, because the sidebar reads them. Non-spec attrs Penpot
must keep live in `penpot-extra-attrs`, seeded with `:stroke-style`.
Render boundaries translate back to camelCase for React and for the
wasm props, and the shape schema declares the closed kebab contract
derived from that same whitelist, so birth and validation cannot
drift.
Migration `0035-fix-shape-svg-attrs-and-defs` converts old files
once with the birth transforms, and carries back the svg-viewbox
rect normalization the withdrawn `0021` had. That old id leaves
`available-migrations`, so files recording it migrate again through
this one, and the binfile cleaner drops its own svg repair.
Review fixes included here: `setup-opacity` and the blend mode read
the stored keys, gradient stops accept `:style` as a CSS string or a
map, `inherit-attributes` reads `:style` so a child's inline style
beats the inherited group attr per CSS, and the svg-attrs menu shows
spec spelling (`viewBox`, `class`) through `stored-attr-display-name`.
Tests cover the migration, the closed svg-attr schemas and the
import/export round trip; the svg-content schema test pins its
sample seed, which dealt no svg-raw shape on unlucky runs.
Closes#11947
AI-assisted-by: muse-spark-1.3-contributor
* 🐛 Keep legacy svg node tags and transforms valid in migration 0035
The closed svg node schemas require keyword tags and map attrs, but
stored files hold def and svg-raw content tags as strings, and some
node `:attrs` as nil. Migration 0035 left them as they were, so the
file data check that runs after migrating rejected those files and
they could not be opened. `normalize-node-tree` now turns string tags
into keywords and nil attrs into an empty map, at birth and in 0035.
With keyword tags, the svg defs renderer applies the shape transform
to user-space defs. Legacy `:svg-transform` values are plain maps,
which multiply into NaN matrices. `gmt/coerce` turns them into
matrices, in 0035 and in the binfile cleaner, because every v3 import
decodes the transform as a plain map again. Legacy masks and gradients
now render as designed in the svg renderer.
The binfile test helper calls `export-files!` with the current config
keys.
AI-assisted-by: claude-opus-5-5
---------
In a damaged file a shape may point to a parent that does not exist.
The Inspect tab computes the position relative to the parent, so
inspecting such a shape replaced the workspace with the internal error
page. Inspect leaves the position out and logs a warning instead.