The file builder behind @penpot/library pinned the features and
migrations it writes to the ones Penpot 2.7 accepted, so its files
could open there. It now writes the current defaults: the features a
new file gets and every available migration. Generated files were
already in the current format (paths, for one, are stored as path
data), so they now declare fdata/path-data and components/swap-group
as they should, and the import runs no migration on them.
Files built this way need the Penpot version the library is built with,
or a later one.
AI-assisted-by: claude-opus-5-5
A swapped copy head followed the position, constraints and layout item
attributes of the main child it replaces, but not its rotation or
flips. When the main rotated or flipped that child, the copies that
kept it turned and the swapped ones did not. Sync, and a variant switch
that carries a swap, now give the head and its subtree the flips and
then the rotation of that child, around the head's own center, unless
the user changed the head's geometry. The swap itself uses the same
step.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 34.1 / 0.97
edit-through-a-chain-of-dependents 68.9 / 75.5 / 1.10
library-update-into-copies 83.1 / 81.3 / 0.98
main-edit-into-10-copies 1.8 / 1.6 / 0.88
main-edit-into-100-copies 15.4 / 15.6 / 1.01
main-edit-into-1000-copies 153.1 / 153.2 / 1.00
variant-switch-into-copies 32.1 / 31.4 / 0.98
AI-assisted-by: claude-opus-5-5
A swap placed the new copy at the position of the shape it replaces,
but not with its rotation or flips. When that shape was rotated or
flipped with its parent, the new copy came out straight. The new copy
and its subtree now take the flips and then the rotation of the shape
it replaces, around their own center, as geometry that comes from the
parent, not as an override. A variant switch goes through the same
swap.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 38.3 / 1.09
edit-through-a-chain-of-dependents 68.9 / 70.7 / 1.03
library-update-into-copies 83.1 / 82.2 / 0.99
main-edit-into-10-copies 1.8 / 1.7 / 0.95
main-edit-into-100-copies 15.4 / 16.7 / 1.08
main-edit-into-1000-copies 153.1 / 167.4 / 1.09
variant-switch-into-copies 32.1 / 29.6 / 0.92
AI-assisted-by: claude-opus-5-5
A variant switch with keep-touched moves a swapped child out of the old
copy to the page root, then into the new copy, which takes the same id
as the old one. The undo of the second move took the child back to
that id, so it landed in the new copy and went away with it when the
undo deleted the new copy. The undo now takes it back to the root,
and from there into the old copy.
AI-assisted-by: claude-opus-5-5
A variant switch with keep-touched carries a swapped child into the
new variant, but left it where it was in the old one. The next sync
then moved it to the place of the child it replaces, at a moment
unrelated to the switch. The switch now gives it that placement at
once, through the same step sync uses: position, constraints and
layout item attributes the user did not change.
Benchmark, against the same code without this change under the same
load (lower quantile, ms; without / with):
deepest-edit-through-three-levels 36.0 / 36.0
edit-through-a-chain-of-dependents 65.2 / 70.2
library-update-into-copies 74.3 / 75.9
main-edit-into-10-copies 1.6 / 1.5
main-edit-into-100-copies 16.3 / 15.7
main-edit-into-1000-copies 162.6 / 165.8
variant-switch-into-copies 27.2 / 27.8
AI-assisted-by: claude-opus-5-5
The migration 0033 stores every swap of a file as an override group.
A swap made in a copy is paired with the child of the near main that
holds the same position, as sync paired it; any other slot is dropped.
All pairings are found on the data as it was, so swaps nested in swaps
pair against the content of the outer one, and libraries pair the same
whether they are migrated or not. A head that refers to its own slot
only inherited it, and drops it even when its near main cannot be
reached. Any other slot that matches no child, or whose near main is in
a library that is not loaded, keeps the slot as its ref, so validation
reports it. An import, which migrates its files before it links their
libraries, leaves those slots and converts them once the libraries are
linked. A migrated head that sits elsewhere than the child it replaces
would place it gets its geometry marked as touched, so the first sync
does not move it. Migrated and new files carry the feature
components/swap-group, so a client that still writes slots cannot open
them.
Validation checks the new form: :misplaced-slot reports any slot,
:misplaced-swap-group the group anywhere but on a nested copy head in a
copy, :ref-not-in-near-main a nested copy head whose ref is not a child
of the near main of its parent, and :duplicate-ref two children of a
copy that refer to the same main shape. Each has a repair.
Nothing but the migrations reads slots any more: the slot branches go
from sync, swap, switch, reset, detach, paste, duplicate and move. The
helpers that read and write a slot on a shape move to files/swap-slots,
and the ones that follow refs to files/comp-processors. The graph
projection drops the FillsSwapSlot edge, the components debugger shows
the component a swapped head takes its content from, and the plugin API
documents componentRefShape for a swapped copy. The swap tests are
named after what they check.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 34.6 / 0.98
edit-through-a-chain-of-dependents 68.9 / 63.5 / 0.92
library-update-into-copies 83.1 / 76.4 / 0.92
main-edit-into-10-copies 1.8 / 1.6 / 0.87
main-edit-into-100-copies 15.4 / 15.1 / 0.98
main-edit-into-1000-copies 153.1 / 148.8 / 0.97
variant-switch-into-copies 32.1 / 26.4 / 0.82
AI-assisted-by: claude-opus-5-5
A swapped copy sub-head now keeps the shape-ref of the main child it
replaces (its position), takes its content from its own component, and
carries the touched group :swap-group. It used to point at the root of
the new component and store a swap slot naming the replaced child.
Every path reads and writes that form:
- sync pairs a swapped head with the child it replaces and syncs it
from its own component; it takes from the replaced child only its
placement: position, constraints and layout item attributes;
- reset undoes a swap in place, keeping the head's id and the other
overrides of the copy;
- detach, paste and duplicate make a head that leaves every copy level
a plain copy of its own component, and advance a deeper one by
position; the children of a swapped head never advance;
- a variant switch keeps a swap stored this way, and counts only the
copy's own swap, not one made in a main of the chain;
- update main replaces the main child with a clone of the swapped one,
and from a swapped head updates its own component;
- a swap inside a copy keeps the old shape-ref and adds :swap-group;
swapping back to the component of that position gives a plain nested
copy whose children refer to the position's children; a swap inside
a main is a plain nested copy.
Files that hold swap slots keep working until a migration converts
them. The component memories describe the model.
This fixes what came from the slot: reset of a swapped child cleared
the other overrides of the copy (F12) and gave copies of a main new
ids (F66); update main left a swap mark (F16); a second variant switch
lost the overrides (F29); grid cells did not pair a swapped child
(F44); a swapped child did not follow its position (F65). F49 keeps
failing, in another form.
The tests that asserted slots now assert the override group; the tests
of the slot code build the old form with :as-slot?.
Benchmark (lower quantile, ms; baseline / now / ratio):
deepest-edit-through-three-levels 35.2 / 35.4 / 1.01
edit-through-a-chain-of-dependents 68.9 / 68.7 / 1.00
library-update-into-copies 83.1 / 77.5 / 0.93
main-edit-into-10-copies 1.8 / 1.6 / 0.92
main-edit-into-100-copies 15.4 / 15.4 / 1.00
main-edit-into-1000-copies 153.1 / 151.1 / 0.99
variant-switch-into-copies 32.1 / 32.4 / 1.01
AI-assisted-by: claude-opus-5-5
No components v1 file reaches the code any more: opening one fails the
feature check, and imports reject it or give it the feature. What only
served v1 goes:
- validate-file and validate-file-affected no longer skip a file
without components/v2;
- the root of a deleted component is found by its main instance id
only, in the type helper and the component sprite;
- generate-sync-library, which synced shapes inside live components,
and the live components in containers-seq, so asset usages walk the
pages only (deleted components keep their objects and still sync);
- the unused :components-v2 file option, from the schema, the file
data and the test fixtures; stored files that carry it still
validate;
- the team migration-in-progress check and its frontend alert, which
leaves ephimeral features out of the team comparison;
- the components v2 introduction dialog, its styles and icons, and the
:v2-info-shown profile prop;
- the graphic asset events and builders and the reads of graphics in
the selection (the :add-media, :mod-media and :del-media changes stay,
so stored changes still apply), and the uncalled render-page and
render-components helpers.
AI-assisted-by: claude-opus-5-5
Both binfile importers stored a file without the components/v2 feature
as a v2 file, though its component data was never migrated. Such a file
is now rejected with :file-in-components-v1, the code that opening a v1
file already raises, when it has components or shapes linked to them
(:component-id, :shape-ref or :main-instance). A file without component
data takes the feature and imports as before.
Since every imported file now has the feature before the pending
migrations are registered, the no-op components/v2 migration goes.
The import dialog explains the rejection: the entry says that the file
uses an old type of components that Penpot no longer supports, with its
own text, as errors.deprecated talks about opening a file.
AI-assisted-by: claude-opus-5-5
Add a battery of tests for text overrides in copies.
- A short notation for text content in tests (thtx): paragraphs of
runs with short style names, read back with equal runs joined,
edits in the notation, set-text and set-content through the change
path, and the override rule for texts (override-units), which says
which overrides a copy must hold against its main.
- Sync matrix: every whole-text copy edit against every main edit,
plus the cards of the worked examples, the "Hello world" table, a
token on a copy, typographies and a library color sync. Where the
code differs from decisions (k) to (o), the result is pinned
against F72 to F80.
- Switch matrix: copy edits against variants that differ in letters,
size, color, a new line or a bolded word; F76, F77, F79 and F81
pinned.
- Composable case BA: EditText also edits fills, font family and a
whole text; the copy and the main change different styles, then
reset or update main, in both runners; F72 pinned.
- Editor output: the content the WASM and v1 editors commit when a
copy text is typed into, retyped, split with Enter and has a word
bolded, recorded in the workspace and replayed on a copy. Typing
sets only the text groups and a style change no text override;
F79 pinned on both editors' content.
A review found tests that would pass with what they test broken.
- Runners: both judge one variant at a time, fail a variant with no
assertion and a known-failure mark that applies nowhere, and give
the asserter the state the operations produced. The pure runner
validates the final file and rejects operations of unknown kind.
The frontend interpreter fails a step when the store reports an
event error (Potok only logs it), reports asserter errors against
their case, and stops the watchers that install! starts.
- Nodes drive the real code: a main root rename goes through
end-rename-shape, and the clipboard's advance of nested copies is
one common function, cll/advance-copied-objects, that copy-selected
and both test paths call.
- Cases N, AH, AI, AK, AD, AE, K, C, H, S, AY, I, Y, AX and F check
what they claim; O, R and T get real sizes.
- Stricter common unit tests found F60 (a repair detaches healthy
copies), F61 (a switch drops a fixed-sizing size), F62 (the ref
chain never stops at its target) and F63 (latent); all pinned.
- Frontend library tests: the RPC double records on subscribe, the
dropped commits check that nothing syncs, and the link and share
tests check the events sent.
- Plugin suite: OpSwap and OpDetach throw when the API call did
nothing, and case AB checks that the reset head is an instance of
the original component.
- The composable suite memory records the new rules.
The component helpers of types/file and types/container and the
library events of the workspace had the lowest coverage left.
- common-tests.types.file-test: the export detach, the reuse of the
library page, the original ref of a swap, deleted components and
used-in?. Pinned: F52 (a library copy nested in a local component
loses its ref in every copy), F56 (the original ref of a swap is nil
when the mains are on different pages) and F57 (library color refs
inside :fills survive the export detach).
- common-tests.types.container-test: the placement rules for moves
and pastes (copies, mains, variant containers, deleted components,
component loops) and small helper branches. A plain shape moved
into its own child passes the rules (F58); relocate-shapes drops it
first.
- frontend-tests.data.workspace-libraries-test: the events on several
shapes at once, each one undo entry; update of a library main; a
blank rename; placing with an id ref.
- workspace-library-updates-test: how a file learns that a library
changed, and the sync dialog with its update and dismiss, with the
RPC mocked.
- workspace-library-links-test: linking, unlinking and sharing.
The variant events had almost no frontend tests, and several switch,
paste, token and restore paths never ran.
- Variant property edits (AR) and adding a variant (AS), in both
runners, through the common generators and the dwv events.
- A frontend-only node for the variant management events: transform
(AT), combine (AU), rename (AV), rename in layers, removal of empty
properties and member errors (AW), and the shortcuts (AX). Each
case has copies of the members; direct tests cover the remaining
branches. AV and AT confirm F6: the copies' name sync lands in an
undo entry of its own (pinned).
- Tests for valid-components-for-variants? and valid-variant-switch?.
- The WASM variant switch test is registered in the runner; it never
ran.
- Token apply and remove nodes and case AY. Its undo confirms F55, an
empty :applied-tokens map after undo (pinned). The interpreter waits
for the token, since apply-token opens no pending work (F54).
- A paste-to-root node and case AZ: F17 does not show through paste.
The frontend copy helper merges touched groups as the clipboard
does.
- Switches that carry real geometry, path and text-structure
overrides, resized through a transform.
- Restoring a component whose page was deleted.
A coverage run found sync paths that no test ran. New cases, in both
runners:
- AK: update main into a grid main. With a swapped child the main's
cells keep the copy child's id (F49, pinned).
- AL: update main after renaming the copy root and its child.
- AM: update main of a swap inside a group. The copy child keeps a
swap slot that names a removed main child (F16, pinned).
- AN: a copy flex child's margin override through a main edit, a
reset and update main. The frontend round trip of the main edit
shows F43 with real sizes (pinned).
- AO: a copy dropped into a grid cell of a main. Its undo shows F41
(pinned).
- AP: a library main deletes a middle child.
- AQ: a main change reaches a copy nested in a sub-board.
Also: the frontend interpreter sends the real reset event instead of
installing a file; a test undoes and redoes an undo entry without a
group, which only release builds store; a test confirms F50, a copy
text touched only in :content-group losing its override (pinned).
A review of the suite after the new operations:
- Dead helpers and duplicate nodes go; the lineage reset and swap
nodes are constructors of reset and swap-shape.
- Repeated helpers are shared: grid boards (tho/add-grid-frame,
tho/place-in-grid-columns), n/nested-head-under, n/child-shape,
r/sync-cascade (the benchmark uses it too), the frontend fixture and
fill helpers, and the plugin getMainComponent.
- Runner tests that repeated cases B, C and D go.
- Comments say what the code does, and the wrong ones are fixed.
- Case K's remote edit painted red on red and its unedited variants
asserted nothing; it starts grey and every variant asserts.
- F43 is pinned in one case, AJ, by the value one undo leaves. L, M, Q
and K get real frame sizes, since their pins depended on when the
100 ms layout buffer flushed.
- make-nested-component takes a level count and depth-sweep gives each
depth once, so K, Q, R, T and W stop running depth 1 twice.
- The completion-contract tests no longer depend on fixed pauses or
on how the watcher batches its events.
Benchmark against the baseline (lower quantile): ratios 0.92 to 1.03,
no world flagged.
The coming refactors and fixes change sync code, and a slowdown must be
seen and explained in the commit that causes it. A JVM benchmark now
times component sync on fixed-size worlds:
- one main into 10, 100 and 1000 copies;
- a change in the deepest of three nesting levels;
- a chain of dependents (a in b in c, with copies of each);
- a variant switch in a main with 100 copies;
- a library update into a file with 500 copies.
Each world is built once; only the sync an edit causes is timed, run
to a fixpoint as the frontend watcher does. Each checks its result, so
a world that synced nothing fails instead of timing nothing.
`scripts/bench-components record` writes the baseline, recorded here on
the code before this commit; `scripts/bench-components` compares against
it and exits 1 when a world is more than 10% slower. It compares the lower
quantile: with the devenv running, the mean of the same code moved
from 0.41 to 1.13 of the baseline, the lower quantile by under 12%.
Fill the unit test gaps in common and frontend component code:
- One test per component error code: break a file in one way, check
the codes validation reports, repair it as the backend does (until
valid, at most ten passes) and check what the repair changed.
Pinned: F46 (a dangling ref in a copy child is never reported), F47
and F48 (two repairs that never converge). :component-not-main,
:should-be-component-root and :not-component-not-allowed have no
test, as no file can produce them.
- Library color and typography sync must not touch copies. Both do
(F3): the color sync touches :fill-group, the typography sync
:content-group and :text-content-attribute, and a later main edit of
that attribute then no longer reaches the copy. Pinned.
- Twenty live thf/dump-file calls in common tests go; they printed
whole file trees on every run and asserted nothing.
- The disabled copy-nested-3 frontend test runs again: a stray
backquote quoted its run-store call, so it never called done.
The composable runners could edit, add, remove and move children, swap
and switch, but not run the other component operations. New nodes run
each one through the production generator in the pure runner and the
real event in the frontend interpreter:
- Detach, UpdateMain, DeleteComponent and RestoreComponent;
- Duplicate, and NestCopy (a copy moved into a main);
- EditText, with the automatic rename the text editor applies;
- MoveShape (frontend only, through the sidebar) and MoveToCell;
- swap-shape and reset on any copy head;
- Undo with a step count, and an edit undone before its sync (frontend
only).
New cases, all with the undo/redo round trip:
- Q, R, S, T, U: detach, update main, delete and restore, duplicate
and nest, at nesting depths 0 to 2;
- V, W, X: a new edit after undo, three undos over nested cascades, an
undo before the edit's sync;
- Y: text overrides against main text edits;
- Z: a main child move;
- AA to AF: swap outcomes on values and structure, and the grid cell
of a swapped child;
- AG, AH, AI: the plugin suite's slot alignment cases.
The plugin suite gets OpDetach, OpSwap and OpReset, names that keep
the roles of two nestable components apart, Assert.knownFailure, and
ports of cases Q, AA, AB and K's reset.
Supporting changes: nodes can record what they created
(IAppliedResult); create-component takes a size, since with 0.01
frames the frontend reflows split undo entries at points that depend
on timing (F43); the interpreter ends the text measurement headless,
so text steps settle; tm/known-failure pins the wrong value a known
bug gives in a case assertion; the interpreter no longer moves its
undo baseline after a skipped optional, which cut the end-of-variant
round trip short.
Confirmed and pinned: F12 (resetting a nested swap clears the top
copy's overrides), F27 (the automatic text rename touches
:name-group), F29 (a second switch loses an override) and F44 (a
swapped grid child misses the main's cell changes). F43 also shows
through a plain sync at depth 2 (case Q).
The composable cases tested undo only where a case asked for it, so a
change generator with a wrong inverse, or a step that splits into
several undo entries, went unnoticed.
Both runners now run an undo/redo round trip on every variant, unless
the case turns it off with a reason. After each user step that adds an
undo group, undo must give back the file before the step and redo the
file after it; a user step that adds no group must change nothing. At
the end of the variant, undoing back to the last assembly step and
redoing everything must give back both states. Files compare through
a shared normalizer that drops :modified-at and, on request,
:position-data, and keeps :touched and :remote-synced.
- The pure runner gets a redo stack and a Redo node; a user operation
that pushes a group empties it. Case P undoes and redoes a main edit
in both suites.
- The frontend interpreter runs the round trip through the real undo
and redo events, and checks that each step moves the workspace undo
index by one entry. Each variant starts with an empty undo stack.
A case can mark a failure that a known bug causes. The mark pins, per
phase, the signature of the failure (the shape, page and component
attributes or the undo index that differ). It covers no other failure,
and it fails the case once the bug stops happening.
The check found two bugs, both pinned:
- F41: when sync moves a copy child to an earlier position, its undo
change puts the child back at the same index, so undoing a reorder
in a main leaves the copies reordered (case F).
- F43: the reflow after a swap or variant switch loses the step's undo
group, so its commits land in undo entries of their own and one undo
leaves the step half reverted (cases L and M).
Applying a commit locally rebuilds the object indices of every page its
changes name. Changes that touch no page, such as :mod-component, name
none, and their nil page id was rebuilt too: the file data in the store
gained a page under a nil key holding {:objects nil}. Every component
touch after an edit to a main added it, and undo never removed it.
Rebuild the indices only for the page ids the changes carry.
The composable interpreter treated a step as done after a 60 ms gap
with no commits, and treated its 2 s timeout as done too. Slow sync or
reflow work could finish after the step, so a case could assert on a
half-synced file.
Each event step now waits, as the plugin waitForLayoutUpdate does,
until every pending work tracked by the reflow registry has drained:
the watcher's sync wait, the sync it starts, and layout and text
reflow. A step that does not drain within 2 s fails the test and names
the work still pending, and the next variant starts with nothing
pending.
The tests cover an edit with a deliberately slow sync, undo and redo
steps that must wait for the watcher's touch-component, translation
and derived commits, a sync that never finishes, and a restart of the
edit watchers, which must keep the undo entries of an edit the same.
The component watcher opened its :sync-file wait only for commits saved
to the undo stack. Undo and redo commit without it, so a wait such as
the plugin waitForLayoutUpdate returned before the watcher had handled
them. Translation and derived commits were filtered out before the wait
opened.
Open the wait for every local commit of a file and close it once the
watcher has decided what to do: sync, only touch the component, or
drop the commit. Dropped commits close it right away.
Add wrf/pending, a snapshot of the pending work, for tests and
diagnostics.
The composable test interpreter wired its own copy of the undo stack
subscription and started only the component watcher, so it reacted to
edits differently from the app, and a missing subscription failed
silently.
Gather the subscriptions that react to edits while a file is open
(undo stack, layout updates, text reflow, WASM text measurement) in
initialize-edit-watchers, stopped by finalize-edit-watchers, and the
per-page component and token watchers in watch-library-changes. The
workspace and the interpreter both start them.
Starting the edit watchers again replaces the running ones. A file
reload starts the workspace again without finalizing it, which left two
undo stack watchers running, so an edit added an extra undo entry.
The composable test engine, nodes, setups and cases lived in the
frontend test tree, so only the frontend interpreter could run them.
Move them to CLJC test helpers under app.common.test-helpers.composable
and add a pure runner (comp.runner) that does what the workspace does
around each operation, without the frontend store:
- after a user operation it syncs the changed components until none is
left, as the frontend watcher does with one pass per sync commit;
- the operation and its syncs form one undo group, and the undo node
reverts the latest one;
- it validates the file once the sync or the undo has settled.
Each node declares its kind: assembly, user, undo or frontend-only.
User nodes record the production changes they apply, and the runner
throws when a node breaks that. The swap and switch nodes build their
changes with the production clv/generate-component-swap-in-place.
Rotate and ChangeHeight need the frontend placement step, so the pure
runner rejects them.
The cases are zero-arg functions in comp.cases, shared by the frontend
interpreter and common-tests.logic.composable-sync-test. The latter
runs cases B to M and the new case O, a switch of an overridden copy,
on the JVM and in JS. Case N and the rotation case stay frontend-only.
The variant switch event picked its target variant, and the component
swap event worked out where the new head goes, inside the frontend
events. Code that runs without the frontend store, such as the pure
composable runner, could not do the same switch or swap. The swap and
the switch also checked for nesting loops with two different
functions.
Move them to app.common.logic.variants:
- find-switch-target picks the nearest variant with the requested
value.
- generate-component-swap-in-place builds the swap changes keeping the
old head's index, grid cell and swap-keep-attrs, plus the
keep-touched step when asked.
- swap-nesting-loop? checks that a swap or switch does not nest a
component inside itself. The swap menu, the plugin swapComponent and
the variants-switch event all use it.
The frontend events behave as before, with two exceptions. Switching
to a value no other variant has does nothing, where it threw in
min-key. A swap also updates the layout of the shapes the keep-touched
step adds.
Write down the intended semantics of copies, :touched and component
sync: what counts as an authored or a derived write, the override
rule, and what each operation (edit, rename, sync, reset, update
main, detach, swap, switch, undo) does to touched groups. It also
records the settled decisions on keep-touched switches, deleted main
children, the eager sync cascade, automatic renames, derived changes
on mains, resized copy roots and layout-owned geometry.
Link it from common/core and common/component-data-model.
* 🔥 Remove a commented-out selector from the debug shape panel
.shape-info-title was left commented out with a "check by hand" TODO in
#12484. Nothing uses it, so delete it instead of keeping it as a comment.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS typographies in the debug shape panel
The panel text and the shape title only set a font size, with a "no exact
DS typography match" TODO. body-small and body-medium differ from them
only in the line-height, so use them directly and drop the TODOs.
Visible change: the panel lines get the DS line-height (1.3 for the text,
1.4 for the shape title) instead of the browser default, so rows grow a
little taller. The panel is debug-only.
AI-assisted-by: claude-opus-5-5
* ♻️ Use the DS stroke width in the migrated DS icons
The DS icons in the areas already moved to the DS set their own
stroke width (1px, 1.33px or 2.25px) to match the legacy icons. They
now keep the DS stroke width, so some icon lines get slightly thinner
or thicker: copy button, context menu, layer row, comments filter,
assets section, share link, dashboard sidebar, team pages, templates,
team switcher and subscription icons.
AI-assisted-by: claude-opus-5-5
* ♻️ Give the share link page rows a class
The page rows of the share link permissions get their own class
instead of a bare li selector. No visual change.
AI-assisted-by: claude-opus-5-5
* ✨ Add the share, handlers and snap icons to the DS
The share button and the path editing bar could not move to the DS
buttons because their icons were missing from the DS icon set. As agreed
with design:
- handlers-equal, handlers-independent, handlers-mirror and snap join the
DS as they are (their SVGs already follow the DS format).
- share keeps its drawing, moved onto the 16x16 grid as a single path
with no fixed color.
- snap-nodes is deleted: nothing used it, and snap is the icon of the
snap nodes button.
The legacy share button in the workspace header uses the same SVG: its
icon is about 6% smaller and now takes the hover color, which the fixed
stroke color blocked before.
AI-assisted-by: claude-opus-5-5
* 🐛 Show the share icon lines outside the app
The share SVG had no fill or stroke, so plain SVG viewers used the
defaults (black fill, no stroke) and drew only three dots. Set
fill="none" and stroke="currentColor", like settings.svg. The app
already sets both in CSS, so nothing changes there.
AI-assisted-by: claude-opus-5-5
* 🐛 Show the handlers and snap icons right outside the app
Like share, these SVGs had no fill or stroke, so plain SVG viewers
filled the shapes black and drew no lines. Set fill="none" and
stroke="currentColor". The app sets both in CSS, so nothing changes
there.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icon buttons to close the subscription dialogs
The close buttons of the five subscription dialogs (plan management,
success, Nitrate subscription, contact sales and manual cancel) were
raw buttons with no name. They become ghost DS icon buttons named
"Close"; the class that places them in the corner goes on the tooltip
wrapper, so they stay where they were and only show the DS hover.
The plans page link-style buttons stay raw: they have no DS equivalent.
A visual test covers the plans page and the plan management dialog.
AI-assisted-by: claude-opus-5-5
* ♻️ Move settings subscription styles closer to the DS
The settings subscription stylesheet inlines the deprecated
button-style mixin and %button-icon placeholder, resolves its legacy
color aliases and font weight, uses logical properties and the DS
typography module without a namespace. The rules on icon svgs that have
no class keep a comment; two that match nothing (the dropdown arrow svg
and .radio-btns) are commented out with a TODO.
refactor/ stays only for the modal placeholders (%modal-*), which move
with the modals refactor. No visual change.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove unused styles from the settings subscription
The SCSS refactor of the settings subscription left rules commented out
with a TODO because the module does not use them, or because they target
an svg inside a DS icon that is the svg itself. CSS modules scope the
classes to this module and no other source uses them, so they go:
.icon-dropdown svg, .radio-btns, .radio-btns label. No visual change.
AI-assisted-by: claude-opus-5-5
* ♻️ Give the subscription icons classes and drop unused props
Review fixes for the subscription styles:
- The plan icon span sets the letter color with color, not stroke on a
bare svg, and drops fill, stroke-width and color: transparent, which
do nothing on a span.
- The plan icon border uses $b-2 (was 1.75px), so it is 0.25px thicker.
- The letter gets its own class for its 2.25px stroke. With the default
stroke it looks too thin next to the border.
- The open link and editors arrow icons get a cta-icon class instead of
the bare svg selector, and take the button color. The arrow used an
icon-dropdown class with no rule.
AI-assisted-by: claude-opus-5-5
* ♻️ Use the DS stroke width and color in the subscription icons
The plan letter and the member icons keep the DS stroke width (the plan
letter line gets thinner), the member icons set their color instead of
the stroke, and the props copied from the button icon placeholder go.
The success dialog logo gets its own class instead of a bare svg
selector.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icons in the dashboard lists and placeholders
The trash project options button becomes a ghost DS icon button, as in
the projects list, and says whether its menu is open. The search
placeholders, the empty project "create new file" button, the comments
placeholder and the legacy import library tag use the DS icons. The
legacy search icon had no fill rule, so its lens was filled black; the
DS one is not.
Two fixtures make the trash testable: a deleted project, and deleted
files due in 2100 (the existing ones expired in 2024, so the trash
dropped them). A visual test covers the trash row, the empty project
button, the project rename field and the comments placeholder.
AI-assisted-by: claude-opus-5-5
* 🐛 Remove the hidden close control from the dashboard rename field
The rename field of dashboard projects and files had a close control
next to the input that never showed: its legacy icon is drawn with a
stroke, but the styles only set a fill. It could not be reached with
the keyboard or a screen reader, and a click on it did what leaving
the field does: the blur saves the name first, and its handler saved
it too. It only left a pointer cursor over an empty spot. Enter, Escape
and leaving the field keep working as before. No visual change.
AI-assisted-by: claude-opus-5-5
* ♻️ Move dashboard trash, comments and rename styles to the DS
The trash, comments panel and rename field stylesheets resolve their
legacy color aliases, sizes, font sizes, mixins and the menu shadow to
DS tokens and values, and use logical properties. The comments panel
and the rename field no longer import refactor/; the trash keeps only
the shared dashboard header styles (common-dashboard), used by ten
dashboard modules.
Four selectors that the modules do not use are commented out with a
TODO. The comments dropdown z-index (4) has no DS token and keeps a
TODO. No visual change.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove unused styles from the dashboard trash and comments
The SCSS refactor of the dashboard trash and comments left rules
commented out with a TODO because the module does not use them, or
because they target an svg inside a DS icon that is the svg itself. CSS
modules scope the classes to this module and no other source uses them,
so they go: .thread-group, .comments-icon-small, .add-file-btn,
.add-icon. No visual change.
AI-assisted-by: claude-opus-5-5
* 🐛 Use px2rem for the unread dot size in dashboard comments
The unread dot used $sz-8, which the DS sizes do not define, so the
integration bundle build failed. It now uses px2rem(8), the same 8px.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS typography and z-index in the dashboard comments
Review fixes for the dashboard lists styles:
- The comments dropdown title uses the headline-small typography. It
was 11px regular, so it is now 12px medium (larger and bolder).
- The comments dropdown uses --z-index-dropdown instead of a raw 4.
- The rename field selector is the class alone; the input type is not
needed to win over the input defaults (0px change).
The visual test now also captures the whole comments dropdown, so the
title change shows.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove dead rules from the dashboard comments styles
The comments dropdown has no separators, so its hr rule matched
nothing, and the comments icon set the default stroke width. No visual
change.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icons and buttons in the settings sidebar and email modal
- The settings sidebar back arrow and "Contact us" icon use the DS
icons. The arrow keeps its place; the small DS icon draws 12px inside
a 16px box, so the feedback icon sits 2px to the right and its margin
shrinks to keep the label in place.
- The change email modal close button becomes a ghost DS icon button
named "Close"; the class that places it goes on the tooltip wrapper.
The form submit buttons of the settings pages stay: they are the shared
forms submit button. A visual test covers the settings sidebar and the
change email modal.
AI-assisted-by: claude-opus-5-5
* ♻️ Move settings sidebar and email modal styles to the DS
The settings sidebar no longer imports refactor/: its legacy mixins,
sizes and color aliases resolve to DS values and tokens, with logical
properties. Its z-index (1) has no DS token and keeps a TODO.
The change email modal does the same and keeps refactor/ only for the
modal placeholders (%modal-*), which move with the modals refactor. Its
legacy uppercase title becomes the DS headline-small typography, which
differs only in its size (12px instead of 11px): the modal grows 2px.
Two unused selectors are commented out with a TODO.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove unused styles from the change email modal
The SCSS refactor of the change email modal left rules commented out
with a TODO because the module does not use them, or because they target
an svg inside a DS icon that is the svg itself. CSS modules scope the
classes to this module and no other source uses them, so they go:
.select-title, .cancel-button. No visual change.
AI-assisted-by: claude-opus-5-5
* ♻️ Tidy the settings sidebar and change email styles
The sidebar uses --z-index-panels instead of auto, the change email
submit button gets its own class instead of a bare button selector, and
the sidebar icons keep the DS stroke width (only the feedback icon line
gets thinner).
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icons in the legacy context notification
The legacy context notification (still used by the global context
notifications, the fonts page, the team, change email, delete account
and export modals) draws its level icon with the DS icons instead of
the deprecated icon set, colored through the color property. The icons
are the same drawings, so nothing changes on screen.
The component stays: the DS context notification has no links, which
the global context notifications use. A visual test covers the info and
warning levels and a warning with html content.
AI-assisted-by: claude-opus-5-5
* ♻️ Move the legacy context notification styles to the DS
The legacy context notification no longer imports refactor/: its sizes,
spacing, borders and alert color aliases resolve to DS tokens, with
logical properties. The legacy body-small typography becomes the DS
one, which differs only in its line height (1.3 instead of 1.4): one
line notifications do not change, and multi-line ones are about 1.5px
shorter per extra line. The unused .default level is commented out with
a TODO.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove unused styles from the legacy context notification
The SCSS refactor of the legacy context notification left rules
commented out with a TODO because the module does not use them, or
because they target an svg inside a DS icon that is the svg itself. CSS
modules scope the classes to this module and no other source uses them,
so they go: .default. No visual change.
AI-assisted-by: claude-opus-5-5
Support currently fixes wrong profile emails and false bounce marks with
raw SQL. Add update-profile-email! (rejects collisions) and
clear-email-complaint-reports! (deletes global and profile reports and
unmutes the matching profile) so these ops run through the REPL.
Closes#12663
The arrow and add icons of the dashboard libraries and templates
section use the DS icons and get their color from the color property.
The collapse button says whether the section is expanded, and the left
scroll button, which had no name, is now named "Previous".
The scroll buttons stay raw: they are round 36px buttons with no DS
equivalent. The template cards are anchors without href; they go to the
anchors backlog. A new fixture lists eight builtin templates, and a
visual test covers the cards, a card hover, the scroll buttons and the
collapsed title. No visual change.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS buttons and icons in the share link modal
- The close button becomes a ghost DS icon button named "Close"; the
class that places it goes on the tooltip wrapper.
- "Get link", "Destroy link" and the confirmation buttons were raw
inputs; they become DS primary, destructive and secondary buttons.
- The copy link button stays a raw segment of the link field; its icon
becomes the DS clipboard icon, a bit larger than the legacy drawing.
- "Manage permissions" stays a link-style toggle; its arrow becomes the
DS icon (the rotation still shows the state) and it says whether the
permissions are expanded.
The page checkboxes and the permission selects stay for their own
groups. A new create share link fixture and a visual test cover the
modal before and after getting a link, with the permissions expanded,
and the destroy confirmation.
AI-assisted-by: claude-opus-5-5
* ♻️ Move share link modal styles closer to the DS
The share link stylesheet resolves its legacy sizes, spacing, mixins,
z-index and color aliases to DS values and tokens, with logical
properties. The copy button inlines %button-secondary with local color
variables, so it looks the same at rest, on hover, on focus and while
pressed; the visual test now also covers its hover.
The legacy typographies become the DS ones, each differing in one
detail: the title and "Manage permissions" use headline-small (12px
instead of 11px) and the texts body-small (line height 1.3 instead of
1.4), so the modal changes height by about 1px. refactor/ stays only
for the modal container, the link input and the page checkboxes.
AI-assisted-by: claude-opus-5-5
* ♻️ Use a DS icon button for the share link copy button
The copy button next to the link was a raw button with the secondary
button styles inlined in share_link.scss. It is now a secondary
icon-button* named "Copy link", so the .copy-button block goes away
(review feedback).
Visible changes: the DS secondary look (grey icon at rest, no lighter
background on hover) and a 32px wide button instead of 28px, so the
link text ends 4px earlier.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icons in the comments panel filter
The comments panel filter (workspace and viewer sidebar) draws its
trigger arrow and menu ticks with the DS icons, as the viewer comments
filter does. The trigger button says whether its menu is open
(aria-expanded, aria-haspopup). The menu items stay: they move with the
menus group.
The dropdown item placeholder styles any svg inside a span with a 12px
box and a stroke color, so the tick icon class sets its 16px box and
currentColor stroke. Nothing changes on screen. A visual test covers
the trigger and the open menu.
AI-assisted-by: claude-opus-5-5
* ♻️ Move comments panel styles closer to the DS
The comments panel stylesheet resolves its legacy sizes, spacing,
mixins and color aliases to DS values and tokens, with logical
properties, and inlines the asset element placeholder of the filter
trigger. refactor/ stays only for the dropdown placeholders, which move
with the menus group.
The legacy body-small typography becomes the DS one, which differs only
in its line height (1.3 instead of 1.4): the menu labels sit 1px
higher. The trigger looks the same at rest and on hover; the visual
test now also covers the hover.
AI-assisted-by: claude-opus-5-5
The Nextcloud link to the enterprise migration guide no longer works.
Point it to the new share.
The box also had a bold "Open the full guide (PDF)" line that looked
clickable but was not, with the real link below it. Keep a single
link and mark it as a PDF at the end of the text.
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS icons in the layer row buttons
The expand, visibility and lock buttons of the layer rows drew their
icons with the deprecated icon set (arrow, shown, hide, unlock, lock).
Use the DS icon instead. The buttons stay raw: they are segments of the
layer row, with backgrounds that follow the row state.
The icons get a class each, so their colors move from svg rules to
those classes, and they keep the old stroke weight. The DS icon draws
12px inside a 16px box:
- The expand button start padding goes from 8px to 6px, so the arrow
stays in place.
- The visibility and lock buttons leave 12px for the icon, so their
icons do not shrink (flex-shrink: 0) and stay centered, uncut.
The rows look the same as before, pixel for pixel. Add a visual test
with a selected, hidden and blocked layer and a hovered row.
AI-assisted-by: claude-opus-5-5
* ♻️ Move the layer name styles off the deprecated styles
The layer name and its rename input used the deprecated body-small
typography, mixins, spacing and token aliases. They now use the DS
body-small typography, sizes, borders and px2rem(), and the layer row
color aliases resolve to their DS tokens, in layer_item.scss too.
The DS body-small has a 1.3 line-height instead of 1.4, so the layer
names sit 1px higher. The name color is one local variable for every
state; the rename input sets it too, since it also has .element-name.
A visual test now covers the rename input.
AI-assisted-by: claude-opus-5-5
* ♻️ Use a DS button for previous in the onboarding questions
The "Previous" button of the onboarding questions becomes a DS
secondary button; it was a raw button with the deprecated modal cancel
styles. It is a bit narrower and its label uses the DS typography.
"Next" stays: it is the shared forms submit button. The "Other" option
icon stays too: it belongs to the forms image radio buttons, which move
with the radio buttons group. A visual test covers the step 2 buttons
at rest and with "Previous" hovered.
AI-assisted-by: claude-opus-5-5
* ♻️ Move onboarding questions styles closer to the DS
The onboarding questions stylesheet resolves its legacy modal color
aliases to DS tokens, uses logical properties and the DS typography
module without a namespace. refactor/ stays only for the modal
placeholders (%modal-*), which move with the modals refactor. No visual
change (checked on steps 1 and 2; only the shuffled options differ
between runs).
AI-assisted-by: claude-opus-5-5
* ♻️ Use DS buttons and icons in the dashboard team pages
The team pages (members, invitations, webhooks and settings) and their
modals move off the deprecated icons and raw buttons:
- The member and webhook row menus become ghost DS icon buttons named
"Options", with aria-expanded.
- The member and invitation role selectors become buttons with
aria-haspopup and aria-expanded, and use the DS arrow icon. They were
divs; one carried a role and an id repeated on every row.
- The four modal close buttons become ghost DS icon buttons named
"Close"; the class that places them goes on the tooltip wrapper.
- "Create webhook" becomes a DS primary button.
- The webhook status, team image and settings icons use the DS icons.
The invitation checkbox tick stays until the checkbox migration. A
visual test covers the role and row menus, the resend and webhook
modals and the team image overlay.
AI-assisted-by: claude-opus-5-5
* ♻️ Move dashboard team styles to logical properties and DS tokens
The remaining legacy color aliases resolve to their DS tokens, physical
offsets and margins become logical properties, and the DS typography
module is used without a namespace. Four selectors that team.cljs does
not use are commented out with a TODO.
refactor/ stays only for component-family placeholders: %input-checkbox
and %checkbox-icon (checkboxes) and %modal-* (modals). The shared
dashboard header styles (common-dashboard) are used by ten dashboard
modules and move in their own change. No visual change.
AI-assisted-by: claude-opus-5-5
* 🐛 Open the team row menus below their button
The member and webhook row menus were placed from the bottom of their
cell with a fixed offset, so their position depended on the menu
height and the button height. The two-item webhook menu covered its
button, the member menu covered the lower part of it, and the taller DS
icon button moved both 3px down. They now open 4px below the button.
AI-assisted-by: claude-opus-5-5
* 🔥 Remove unused styles from the dashboard team pages
The SCSS refactor left four rules commented out with a TODO because
team.cljs does not use them. CSS modules scope the classes to this
module and no other source uses them, so they go: .dashboard-top-cta,
.error-notification, .empty-invitations-buttons and
.invitations-dropdown. No visual change.
AI-assisted-by: claude-opus-5-5
* 🐛 Find the member role selector as a button in the dashboard test
The "Bug 9443" test looked for the member role selector as a combobox.
The selector is now a button with aria-haspopup, so the test failed in
CI. It now looks for a button named "Admin", and checks that the owner
has no such button.
AI-assisted-by: claude-opus-5-5
When render-wasm is active, generate SVG for the Code inspector and
Copy as SVG from the WASM export path instead of classic SVG codegen.
Add multi-root render_shapes_svg so multi-select stays one document.
Closes#12567
