A failed render-wasm call traps without popping its shadow-stack frames.
Each failure leaked stack until it overwrote static data, and from then on
every call trapped as wasm-critical. h/call now saves the stack pointer
before the call and restores it on failure.
Closes#12977
Related to #12906
AI-assisted-by: claude-opus-5-5
* ♻️ Wait on signals instead of event-loop turns
`wait-for` counted its budget in event-loop turns (50 x `setTimeout 0`,
about 54 ms idle), so a delivery that travelled through the RxJS async
scheduler could arrive after the wait gave up. It now accepts a
`:signal`: the predicate is re-checked on every emission and the wait
resolves on the event that changes the state. The ceiling (5000 ms)
only bounds failure when a signal is given, and stays a poll budget for
the waits that have nothing to listen to.
`wait-for-store` wraps the store's input stream, which notifies its
subscribers after applying the update. The five explicit `:max-ticks`
sites move to `:timeout-ms` in the same change, so the old option never
lives in a state where destructuring silently ignores it.
New `frontend-tests.helpers.async-test` pins the contract: a late
delivery resolves, a store signal resolves on the event without a poll,
an already-true predicate does not yield, a never-true predicate records
one failure within the ceiling, and a resolved wait stops listening.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Wait for the persistence requests on their own stream
The persistence tests waited for `(= N (count @requests))` by polling the
atom at every event-loop turn. The mocked transport now pushes each
request into a `requests$` subject, and those 59 waits pass it as
`:signal`, so they resolve on the request that makes the count true. The
two predicates that mix the request count with the store state merge
both signals.
The wait that flaked (`the other file's edit is sent next`, in the
rollback test) is one of these: it no longer depends on a turn budget,
and it cannot lose the delivery.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Wait for the store event in the store backed tests
153 waits whose predicate reads the store now go through
`wait-for-store`, so they resolve on the store event that changes the
state instead of polling at every event-loop turn. The count is 153, not
the 162 the plan estimated: nine of them read the store through a
helper (`fill-color`, `shape-name`, `copy-children`) rather than
`@store`. The five sites that carried an explicit ceiling drop it, since
with an event the ceiling only bounds failure.
Resolving on the event exposes the places where the poll was really a
pause for a side effect to advance:
- `tokens-source-test` emitted `unlink-file-from-library`, a watch that
chains a second `rp/cmd!` after an async hop. The store signal fires
before the chain runs (the event itself dissocs the library), so the
mock scope closed in flight and the second call reached the real HTTP
layer. The test now waits for that second call, through the mock.
- `persistence-rollback-test` drives the persistence pipeline step by
step; two of its waits are the pause before the next emit, not an
effect, so they keep the poll.
AI-assisted-by: deepseek-v4.1-flash
* 📚 Document the wait contract and what still polls
`mem:frontend/testing` described `wait-for` as an immediate check plus a
bounded poll. It now waits on a signal, and the ceiling only bounds
failure; `wait-for-store` and the persistence `requests$` subject are
how a wait resolves on the event that changes the state. The waits with
nothing to listen to keep the poll, and the memory names them.
The two traps that cost a red suite are recorded too: a wait that means
"the side effect advanced" has no event and keeps the poll, and a
store-state wait can close the mock scope before the flow it observes
ends, so the chain's last RPC call has to be awaited through the mock.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Give the wait wrapper a single signal
`wait-for-store` built its options with `assoc`, so it replaced the
`:signal` a caller passed. The two waits whose predicate reads both the
store and the request counter relied on a merged signal that was being
discarded; they now pass it to `wait-for` themselves, and the wrapper
takes no options. That merge was the safety net for a request counted
after the store event, and it was inert.
The helper also reports why a wait failed (ceiling, ended signal, or an
error with its cause) instead of calling all three a timeout, counts
the predicate evaluations in the late-delivery case to prove the signal
path does not poll, reads the clock through `app.common.time` in the
helper and the test, and the test's turn probe cancels its timer. The
copyright header of `helpers/async.cljs` stays as the previous commit
left it, matching the majority spelling.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Give the cycle counter a signal too
Two waits in the retry tests read the store and the `cycles` atom, which
the `slow-cycle-timer` double fills inside the persistence watch. They
passed only the store signal, so a counter change could not wake them:
the same latent race the previous commit removed from the request count.
The double now also emits each new cycle into a `cycles$` subject, and
both waits pass the merged signal to `wait-for`.
The public `wait-for` docstring names the three failure reasons, and the
message for a failed signal bounds the cause text: the exception message
when there is one, otherwise the printed value inside a try, cut at 500
characters.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Stop the error handlers flooding the test log
Four tests in `main-errors-test` run a real error handler end to end.
Those handlers print the cause with `ex/print-throwable` before
notifying, which is what a developer wants in the app; in a test it only
writes console noise. One of them replays 10,000 offline errors, so a run
carried 10,006 dumps: 190,010 of its 192,682 lines, 13.8 MB, well past
the ~4 MB where GitHub truncates a step log and takes the summary and any
failing assertion with it.
The tests stub `ex/print-throwable` with a no-op for the duration of
their mock scope. The handlers still run, the assertions do not change,
and the 10,000-error loop still proves the governor emits once. A full
run now logs 2,583 lines and 384 KB. The single block that remains comes
from the re-entrancy guard, which prints its own notice on purpose.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Silence the deliberate WASM panic in its test
`get-svg-markup` logs a WASM panic with `console.error` before returning
empty, and `get-svg-markup-swallows-wasm-errors` sends two panics through
it on purpose. That was two 35-line dumps in which the exception printed
its own `data`, `arr` and protocol masks, and it reads like a failure that
the suite is hiding.
The test replaces `(.-error js/console)` for its body and restores it in a
`finally`. The assertions and the helper stay as they are: the same
panic answered with a different stack would still show up, because only
this test silences the console.
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Use real timer for wait-poll ceiling
wait-poll read the app clock (ct/now), so tests freezing that clock
never reached the deadline and hung instead of failing. Track expiry
with a real setTimeout flag, pass timeout-ms through wait-signal and
wait-for, and cover the frozen-clock case with a regression test.
AI-assisted-by: muse-spark-1.3-contributor
* 🐛 Limit token propagation to the new instance on swap and instantiate
Switching a variant and adding a component instance re-applied every
active token to every shape of every page. In files with thousands of
token-styled shapes this took over 10 seconds, while only the new
instance needed the file's token values.
propagate-workspace-tokens takes an optional scope (page id and root
ids) that limits the propagation to those shapes and their descendants.
component-swap and instantiate-component pass the new instance's root.
Calls without a scope still cover the whole file.
Closes#13019
AI-assisted-by: claude-opus-5-5
* ✨ Add token tests for instantiate, swap and multi-page propagation
Cover instantiate-component and component-swap with components whose
stored values differ from the resolved tokens, checking that the new
instance gets the file's token values and other shapes are untouched.
Add a second page to the propagation tests to check that unscoped
propagation reaches other pages and scoped propagation does not.
AI-assisted-by: claude-opus-5-5
The GitHub icon had a hardcoded white fill, so it was almost
invisible on the light theme. Use currentColor so it follows
the button text color.
Fixes#12938
Signed-off-by: deni-ing <242363192+deni-ing@users.noreply.github.com>
* ♻️ Split the share link dialog into smaller components
Move the dialog state into a content component and extract the
permissions section, the page selection, the select rows, the
collapsible panel and the destroy confirmation.
The confirmation now keeps the link to destroy instead of matching it by
flags, so deleting a link no longer depends on the options snapshot.
AI-assisted-by: deepseek-v4.1-flash
(cherry picked from commit 3ce7f9d09765e4f6afc033db544aabca379c0ca4)
* ♻️ Use the design system controls in the share link dialog
Replace the deprecated select, the raw text input and the hand-written
page checkboxes with the design system select, input field and checkbox
components, and drop the deprecated icons and the unused uuid parsing.
AI-assisted-by: deepseek-v4.1-flash
(cherry picked from commit 3ce7f9d09765e4f6afc033db544aabca379c0ca4)
* ✨ Add dialog semantics to the share link dialog
Give the dialog and the destroy confirmation proper dialog and
alertdialog roles and labels, cancel the confirmation with Escape, and
connect the disclosure button with its panel through aria-controls.
AI-assisted-by: deepseek-v4.1-flash
(cherry picked from commit 3ce7f9d09765e4f6afc033db544aabca379c0ca4)
* ✨ Toggle the share dialog from the viewer header
Let the share button close the dialog when it is already open, report
the dialog state with aria-expanded and aria-pressed, and mark the
button with data-allow-click-modal so the closing click does not count
as an outside click.
Drop the click-outside guard on close; it is not needed once the button
can reopen the dialog.
AI-assisted-by: deepseek-v4.1-flash
(cherry picked from commit 3ce7f9d09765e4f6afc033db544aabca379c0ca4)
* 🐛 Move focus into the share dialog and restore it on close
Move focus into the dialog when it opens and into the Cancel button when
the delete confirmation opens, so Escape reaches the confirmation handler
instead of closing the whole dialog.
Restore focus to Destroy link when the confirmation closes and to the
Share button when the dialog closes.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Apply review follow-ups to the share link dialog
Use aria-haspopup instead of aria-pressed on the Share toggle, drop the
raw z-index, and express the small spacing values with px2rem. Restore
the collapsible pointer cursor and merge its two classes.
Memoize the permission options, expose aria-controls only while the
panel is open, and label the read-only URL field.
AI-assisted-by: deepseek-v4.1-flash
* ✨ Add export previews to Design and Inspect
Preview a selected shape's export presets in Design and Inspect, with
output dimensions and a shared persisted expansion preference.
Bound native previews to 240px and debounce subtree updates while keeping
the current image until its replacement is ready. Release replaced URLs
and cancel pending rendering when the preview closes.
Keep this change focused on previews and track native export fill
handling separately.
Closes#7561
AI-assisted-by: gpt-6
Signed-off-by: Danial Shirali <danialshirali16@gmail.com>
* 🌐 Add Spanish translations for the export preview
The export preview added four new keys only to en.po, so Spanish users
saw them in English.
AI-assisted-by: claude-opus-5-5
* 🌐 Improve the Spanish export preview labels
AI-assisted-by: claude-opus-5-5
---------
Signed-off-by: Danial Shirali <danialshirali16@gmail.com>
Co-authored-by: Eva Marco <evamarcod@gmail.com>
* 🐛 Fix font upload crash and preserve variant metadata
opentype.js 2.0.0 returns no fontSubfamily name for fonts whose
Macintosh name table only holds custom records. That made
parse-font-weight/parse-font-style call re-seq on nil and crash the
upload.
A nil or blank variant is now treated as no match in
app.common.media, defaulting to weight 400 and style normal. The
variant parsing also accepts oblique as italic, and the new
parse-font-family helper derives the family from a filename by
stripping the known weight/style tokens, separating a style token
glued to a weight token ("Roboto-BoldItalic" -> "Roboto").
first-nonblank-string returns the first nonblank candidate, so a
blank preferredFamily/preferredSubfamily no longer shadows a valid
fontFamily/fontSubfamily.
app.main.data.fonts gains resolve-font-metadata and
prepare-font-entry. opentype.js values win per field; any missing
value falls back to the filename-derived family, weight and style.
The parsed and woff2 branches share the same helper, so metadata is
preserved instead of collapsing every face to weight 400, and
fonts with missing vertical-metric tables upload with no height
warning instead of failing.
process-upload reports per-file failures (unknown signature,
unparseable file, preparation error) with a single bad-font
notification instead of silently dropping them, and never errors
for per-file failures.
The upload now sends :variant-name to create-font-variant, which
accepts it as an optional param (ships in 2.20), so the foundry
name survives the upload.
Closes#10436
AI-assisted-by: deepseek-v4.1-flash
AI-assisted-by: muse-spark-1.3-contributor
Signed-off-by: CHOI JUNSOO <junsoo1172@gmail.com>
* 🐛 Parse glued font style tokens in the font parsers
EvaMarco's review on #11951: parse-font-family and
parse-font-weight handled glued tokens like "BoldItalic", but
parse-font-style did not. For names such as
"opensans-bolditalic-webfont.woff2" the three parsers disagreed:
the italic face resolved to style normal and collided with the
bold-only file on the (family, weight, style) join key. One
binary silently overwrote the other during upload, losing one
font face without any warning.
A new private normalize-font-name helper is applied by all three
parsers. It splits a style token glued to a weight token, now
with a lookahead boundary so "LightItalic_v2" splits too, and
strips a trailing technical suffix (-VF or _v<number>).
parse-font-family, parse-font-weight and parse-font-style now
interpret the name consistently.
Tests cover the three cases from the review, the bold-only
control case, and an end-to-end process-upload check that a bold
and a bold-italic WOFF2 survive as two variants.
Relates to #10436 and PR #11951.
AI-assisted-by: inkling-2-small-free
* Remove duplicate frontend test registration
---------
Signed-off-by: CHOI JUNSOO <junsoo1172@gmail.com>
* 🐛 Fix collapsing token set groups after reordering
The handler captured the first render path, and the tree is keyed by
index, so after a reorder it toggled the path of another group.
Closes#12625
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Refresh double click handler of token set groups
Add the start edition callback to the hook deps so the handler does
not keep the initial closure.
AI-assisted-by: deepseek-v4.1-flash
* ✨ Add regression test for folding reordered token set groups
Reorder a group in the sets tree, fold it, and assert that only that
group collapses. The tree is keyed by index, so the test also proves
the collapse handler does not keep a stale path after a reorder.
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Refresh double click handler of token set nodes
Add the start edition callback to the hook deps so the handler does not
keep the initial closure.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Key token set tree nodes by identity instead of index
React reuses a node by its key. Keyed by the tree index, a reordered
group moved the instance to another node and its handlers kept the
previous paths. Groups are now keyed by path and sets by id, so each
node keeps its own handlers.
The set being created has no persisted id yet, so the tree walk
generates a new one on every render. Keep one uuid for its whole
creation instead.
AI-assisted-by: deepseek-v4.1-flash
* 🔧 Run the Playwright tests with a dark color scheme
Since #12480 a profile without a theme follows the system one, and
headless Chrome reports a light scheme, so the e2e tests ran with the
light UI. Set colorScheme to dark in the shared Playwright options so
the tests use the default dark UI again. Tests that need another scheme
still set it with page.emulateMedia.
AI-assisted-by: claude-opus-5-5
* 🔧 Drop the dark color scheme overrides now set for every test
The shared Playwright options now set the dark color scheme, so the ds
project override and the emulateMedia call in the selection size badge
test do nothing.
AI-assisted-by: claude-opus-5-5
Changing the library in the Swap component menu cleared the search
field, so checking several connected libraries for the same component
meant typing the name again for each one. Keep the term and reset only
the library id and the group path, so the new library is shown already
filtered.
Closes#12335
AI-assisted-by: claude-opus-5-5
Signed-off-by: JiMyung Lee <lee.ji.myung@gmail.com>
* 🎉 Add UI for toggling bullet lists (under config flag)
* 🎉 Store list-style-type as a paragraph attribute
The bullet list toggle now saves list-style-type ("none" or "disc") on
the selected paragraphs and reads it back. A paragraph without the attr
counts as "none", so a bullet paragraph next to an older one shows as
mixed.
WASM keeps the value on each paragraph: the paragraph bytes grow from
12 to 16, Enter keeps it on the new paragraph, and the v3 editor reports
it in the current styles, so the sidebar shows it while editing too.
Refs #12630
AI-assisted-by: claude-opus-5-5
* ✨ Draw bullets for list paragraphs
A paragraph with list-style-type "disc" now gets a solid round bullet,
sized as Chrome draws a CSS disc marker (measured with Source Sans Pro):
a radius of 0.16 font sizes, centered 0.32 font sizes above the first
baseline, with a gap of 0.33 font sizes before the text. The bullet
hangs outside the text box, before its start edge (after it for RTL),
like CSS list-style-position: outside, so the text layout, caret and
selection stay as they were.
The bullet takes the paint of its line's first style run, so fills,
strokes, shadows and masks apply to it as they do to the glyphs. An
empty item, which has no run, borrows the previous item's paint. The
cached paint, the text extrect and text-to-path share one walker over
the paragraphs, so they always agree: the extrect grows to hold the
bullets, like shadows and blur, and flattening a text keeps them.
Refs #12630
AI-assisted-by: claude-opus-5-5
* ✨ Show the list style in Inspect
Text paragraphs with list-style-type "disc" now show a "List Style" row
in the Inspect Styles and Computed views, after Text Transform. Its copy
action gives "list-style-type: disc;". Text without a list shows no row.
The list item check lives in common as list-paragraph?, so every place
that needs it shares one rule.
Refs #12630
AI-assisted-by: claude-opus-5-5
* ✨ Generate list HTML and CSS for bullet paragraphs
In the Inspect code, neighbouring paragraphs with list-style-type
"disc" become one <ul> with an <li> each, keeping the paragraph's class
and dir. Other paragraphs stay <p>. Only code mode groups them; text
rendering still uses <p>.
The CSS sets list-style-type on the items and resets the list's margin
and padding, so the browser hangs the bullet before the text as the
canvas does. Paragraph rules set font-size: 0, so each item also gets a
::marker rule with its first span's font size and text color. A
::marker can't paint a gradient, so a gradient fill gives its first
stop.
Refs #12630
AI-assisted-by: claude-opus-5-5
Changing a component inside a big main component made the WASM renderer
draw that component's thumbnail at full size on the main thread, before
the viewport redraw. On the Fauna file the 2140x1642 thumbnail took about
1.2 s to render and PNG-encode, so the switch showed up late.
- Fit the thumbnail's longest side between 200 and 512 px. Small
components still scale up; big ones now scale down.
- Draw the thumbnail only on a frame with no viewport render pending
Closes#12968
AI-assisted-by: claude-opus-5-5
Add a from-library property to the apply-tokens event, true when the
file takes its tokens from a linked library.
Emit a link-file-to-library-tokens event with tokens-count when the
linked library has tokens, mirroring link-file-to-library-variants.
Both events share one get-library-usage call.
Closes#12915
AI-assisted-by: claude-opus-5-5
Add a CLI under frontend/performance/benches/render_wasm that builds the
renderer, runs seeded scenes (rects, plus, paths, masks) in headless
Chromium and saves per-case timings.
- build, run: prepare or reuse builds; measure cases with warmups,
repetitions, deadlines
- ab: build and compare Cargo feature configurations
- compare, merge: median changes with bootstrap CIs between saved runs,
guarded by scene, build and settings checks
- purge: delete managed builds, runs or comparisons
- GPU runs through `run-devenv --gpu`
Lint, format and pnpm scripts now cover performance/ and its tests.
AI-assisted-by: gpt-6.1-sol, deepseek-flash, muse-spark, glm-5.3, gpt6-astra, claude-5.5-sonnet, claude-haiku-5.5
* ✨ Add unit tests for the token name schema
Cover make-token-name-schema, the schema that rejects a token name whose
path clashes with an existing token or group. The lower-level
token-name-path-exists? already had a test; the schema that composes it
did not.
The cases pin an exact duplicate, a token inside a token, a token name
that collides with a group, an existing child path, valid siblings, the
fail-closed nil tree, invalid syntax and the length limit. This is the
unit-test base for reducing the 15 group-name-clash e2e cases to two.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Remove duplicate token tests and fix the spread step
The three top-level tests duplicated the ones inside the creation
describe; only the indentation differed. Keep the originals.
The shadow token test labelled "Valid spread" filled the blur field, so
the token under test ended with blur 0 and the spread never changed.
Fill spread instead and expect the referenced token to resolve with
Blur: 4.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Reduce the token group-name-clash e2e matrix to two tests
The fifteen cases repeated the same setup and only changed the token
type and value. The rule is now covered by the token name schema unit
test, so keep two representatives: thirteen simple types in one test
with a test.step each, and the two composite forms (Typography and
Shadow) in a second test.
The helper no longer re-runs the file setup, so each test loads the
page once: 15 page loads become 2 and the block drops from 433 s to
about 21 s.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Cover the numeric token creation types in one test
The nine creation tests repeated the same validation ladder and only
changed the token label and placeholder. Run the ladder once in the
border radius step, keep the reference token creation, and create the
other eight types with a test.step each.
The new helpers split the flow: open the form, assert the ladder, save
a token. The e2e drops from nine page loads to one.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Reduce the remapping e2e spec to three tests
Keep one remapping flow per token shape: box shadow with alias
references, border radius with a value change, and a group rename with
undo. The two cancel paths lose their own page loads and become steps
inside the shadow test: close keeps the original name, and "don't
remap" renames the token and breaks the reference.
The deleted typography and shadow applied-shape cases exercise the same
data path, which the remapping unit tests already cover.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Shrink the tooltip and numeric-revert e2e tests
The tooltip test asserted five message shapes over eleven layer
selections. Keep the three that have no unit test: a deleted token, a
reference outside the active sets, and a token in an inactive set. Each
is one step with a pill label and its tooltip text.
Three of its five messages were already covered by the token pill unit
test, including both resolved-value cases.
Keep one numeric-revert test and drop the fixed sleeps: await the value
with toHaveValue instead. Division by zero and the min/max clamp are
unit-tested in the numeric input tests.
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Preserve HSL values while editing lightness
Keep HSL editing components through black, white, and grayscale.
Use the same draft for numeric inputs, sliders, and gradient previews.
Strip the draft before emitting color data and reset it on other edits.
Closes#12615
Signed-off-by: makesomethingshit <junsoo1172@gmail.com>
AI-assisted-by: GPT-6
* 🐛 Keep HSL drafts consistent across gradient and ramp edits
Match RGB components to HEX so gradient echoes preserve HSL drafts.
Discard stale HSL values when editing Ramp hue, saturation or value,
while preserving them for opacity-only changes.
Cover grayscale gradient echoes and saturation restoration.
Signed-off-by: makesomethingshit <junsoo1172@gmail.com>
AI-assisted-by: GPT-6
---------
Signed-off-by: makesomethingshit <junsoo1172@gmail.com>
* ✨ Add the file and MCP session to plugin audit events
Events sent by plugins and the MCP plugin only carried their origin, so
the multi-file and dashboard MCP workflows could not be measured, nor
duplicated events from several open tabs spotted.
The context of se/event and se/add-event now carries the file-id of the
file the action ran in (absent on the dashboard) and, for the MCP, the
mcp-session-id of the tab connection that ran it.
Closes#12902
AI-assisted-by: claude-opus-5-5
* ♻️ Drop the MCP session id from plugin audit events
Every audit event already carries the session-id of the tab in its
context, and the MCP session id is only a hash of it, so it adds
nothing to group events by tab.
AI-assisted-by: claude-opus-5-5
* 🐛 Use a reified event in the system events test
ptk/data-event does not implement IWithMeta, so add-event failed on it.
Plugin actions emit reified events, which carry metadata.
AI-assisted-by: claude-opus-5-5
Dashboard actions made by a plugin or the MCP through penpotMgmt reached
the backend audit log without event origin, so they looked like actions
made by hand in the dashboard. The backend reads the origin from the
x-event-origin header, which rp/cmd! only sends when the params carry
::ev/origin in their meta.
Tag the params of every penpotMgmt mutation with the same meta that
se/add-event sets (mcp or plugin). The rename, share and team update
events now keep that meta on the RPC params, so setters send it too, and
set-file-variants-shared takes the caller origin instead of a fixed
dashboard one.
Closes#12901
AI-assisted-by: claude-opus-5-5
Hiding board names from the View menu reset on every reload, while
rulers and comments kept their state. Add the flag to the layout flags
persisted in local storage so it behaves the same way.
Closes#12871
AI-assisted-by: claude-opus-5-5
The apply-tokens event fires once per apply call, so a plugin or MCP
script that loops over shapes sends one event per shape while the UI
sends one per selection. Add a shape-count prop with the number of
shapes the token was applied to, so analytics can compare origins in
the same unit.
Closes#12900
AI-assisted-by: claude-opus-5-5
Plugins with global scope or a management permission (allow:global,
manage:projects, manage:teams, manage:delete) keep running outside a file
and can drive the management API. That feature is still in progress, so
only the bundled MCP plugin and plugins served from localhost, 127.0.0.1
or [::1] get it. The host check ignores letter case and a trailing dot.
The check runs at three points:
- parse-manifest throws global-not-allowed, so the plugin manager and the
dashboard install link refuse remote global plugins with a specific
message. Opening an installed plugin fetches its manifest again, so
plugins stored before this change are refused too.
- start-plugin! and load-plugin! refuse to run such a plugin and warn the
user; this also covers bundled plugins without a URL.
- has-permission? withholds the global permissions from stored remote
plugins, so the management API rejects them.
AI-assisted-by: claude-opus-5-5
* 🐛 Fix plugin component lookups for missing and deleted components
Shape.component() threw "Assert failed: (uuid? id)" on a copy whose
library is not available, because the head lookup returns a pair with a
nil component and the proxy was built anyway. It now returns null.
Shape.componentRoot() built its proxy with the component's file and main
page, so a copy on another page or file than its main got a shape that
pointed at nothing, and a copy of a missing library threw. It now
resolves the root on the shape's own file and page, like componentHead().
LibraryComponent.mainInstance() returned a proxy for the root kept in a
deleted component's objects, which is on no page, so every field read
empty and parent threw. It now returns null for a deleted component.
* 📚 Fix the variant example in the MCP instructions
The createVariantContainer example called penpot.currentPage.findAllShapes
and Shape.isMainComponent, which do not exist, so running it as written
failed. Use penpotUtils.findShapes with isComponentMainInstance instead.
* ✨ Partition file_change by file_id
Partition `file_change` by `HASH (file_id)` in 16 partitions, with the
same bounds as `file_data`, so a join between them is resolved partition
by partition. The primary key becomes `(file_id, id)`, which a
partitioned table needs, and every access filters by `file_id`.
The new table carries a `kind` column (1 snapshot, 2 revision) as a
reserve: the queries still tell them apart by the label, and `kind`
takes over when they are rewritten. The payload of a snapshot stays in
`file_data`; the `data` column is kept for reading old `legacy-db`
payloads.
The four snapshot commands require `file-id`, because it prunes the
partition. The objects GC locks and deletes by the pair, in batches. The
old table is kept as `file_change_legacy` as the way back.
The automatic migration refuses to run above 10 GiB or 2M rows and
points to the runbook; big instances partition online with that runbook,
which copies by id, follows the `updated_at` watermark in delta passes
and checks that no row of the source is missing from the target.
Closes#12416
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Address the review of the file_change partition
The production runbook promised a rollback it did not have: the section
was a sketch, and its statements could write to the table about to be
dropped. The rollback is removed, and so is every comment that described
it. `file_change_legacy` stays as a frozen copy of the previous layout.
The cutover check now aborts the transaction when a row of the old table
is missing in the new one, instead of leaving the decision to the
operator.
The five secondary indexes of the new table are built after the last
delta pass: the bulk and the delta passes only need the primary key, so
the batches no longer maintain them.
The copy of 0158 is now replayed in a test against the pre-0158 shape
with a labelled and an unlabelled row, plus an empty instance that must
leave no legacy table behind. The updated_at assertion of the snapshot
mutations is bounded by the test clock, and the repair revision stops
writing the `features` of the file, like the normal save.
AI-assisted-by: deepseek-v4.1-flash
* 📎 Fix linter issues
* 🐛 Fix stale helper call in rpc_file_snapshot_test
The suite does not load: `th/run-pending-tasks!` does not exist in
backend-tests.helpers. The pending jobs runner is `run-pending-jobs`
(no arguments), the name every other call site of the suite uses.
AI-assisted-by: inkling-2-small-free
* 📚 Align the partition change with the 2.20.0 milestone
2.19.0 is already shipped; this work targets 2.20.0. The operations
file of the partition procedure carries the 2.20.0 prefix, the
references that point at it (the migration, the runbook table and the
memory) follow, and the RPC doc/changes tags of the snapshot commands
record 2.20 as the release that makes `file-id` required.
AI-assisted-by: inkling-2-small-free
* 🐛 Fix review findings on the partition rebase
The 0157 legacy test was missed by the rebase and inserted file_change
rows without the new mandatory `kind` column, so the backend suite fails
against the migrated schema. The inserts now carry `:kind`
(snapshot-kind for the labelled rows, revision-kind for the rest).
The post-cutover verification block of the runbook terminates the
first query with a semicolon so the block pastes into psql without a
syntax error.
The guard message of the migration names the step
(0158-partition-file-change) instead of "0158", ambiguous since two
migrations share that number.
Closes#12416
AI-assisted-by: inkling-2-small-free
* 🐛 Fix the stale label in the snapshot restore test
The rename block of snapshots-crud runs before the restore block,
so the restored version is already named "label1-updated" when the
restore publishes its message. The command names the version by the
label the row has at that moment, not by the one it had when it was
created, so the test was asserting a stale value.
Assert the current label, and say why in the comment.
AI-assisted-by: deepseek-v4.1-flash
* ♻️ Split the version event tests into one test per command
The workspace version events and the plugin proxy send the file-id
of the open file on every snapshot command, because the command
needs it to prune the partition of file_change. Both tests checked
that with a doseq and t/testing blocks, so a failure named the whole
group and not the command that broke.
Give each command its own test. The workspace ones share a helper
that runs the event and returns the command and params it sends; the
plugin ones keep their own mock of rp/cmd!.
AI-assisted-by: deepseek-v4.1-flash
The Playwright config gives the retrying expects 40 seconds on CI and 5
seconds elsewhere, but the default and ds projects set their own expect
block for the screenshot tolerance, and a project block replaces the
top-level one instead of merging with it. On CI those projects have run
with Playwright's 5 second default.
That is too short for the first dashboard load on a busy runner, where the
dashboard module is fetched lazily: specs that wait for the dashboard
heading time out and pass on the retry (flaky), or fail after the
retries. In the shard of one recent run that was 7 flaky and 4 failed
specs out of 112, and develop itself failed the same families of specs on
several runs the same day.
Name the timeout once and repeat it in both projects. A probe config that
imports this one and polls a condition that never holds reports 40000 ms
for both projects with this change, and 5000 ms without it. The
render-wasm project already repeats its own value.
AI-assisted-by: claude-opus-5-5
AI-assisted-by: claude-sonnet-5-5
Signed-off-by: Filip Sajdak <filip.sajdak@siili.com>
* 🐛 Require thread access when marking threads as read
mark-all-threads-as-read took any list of thread ids and wrote the read
status of the caller on each of them, without checking that the caller
can access the file that owns the thread. It was the only comment
mutation that did not check permissions, and it took the ids as an
unbounded array, so a single request could keep a database connection
and a transaction open for a long time.
The rpc now resolves the threads in one query and checks the comment
permissions of every distinct file, answering not-found when a thread
does not exist or is not accessible. Both cases answer the same error
on purpose, so the response cannot be used to tell existing threads
apart.
The status rows are now written with a single insert, keeping the
modified-at date one second in the future that makes the thread count
as read. Repeated ids are deduped, the command returns nil again like
the sibling commands with no result, and the schema limits the number
of threads per call to 500 while the dashboard sends the ids in batches
of that size.
Tests cover access rejection, unknown threads, mixed batches that write
nothing, repeated ids, empty lists, marking twice, and the frontend
batch split.
Relates to GHSA-j4vc-cmf6-jhr7
AI-assisted-by: minimax-m3.1-flash
* 🐛 Refresh the unread list when a batch fails
The dashboard sends the thread ids in batches of 500 and each batch
commits on the server. A failure in a later batch left the unread list
stale: the re-read only ran when every batch succeeded, so the threads
already marked as read stayed visible as unread.
The re-read now runs in both paths. On failure the event is emitted
before the error is propagated, so the error toast still shows and the
success toast stays limited to a full success.
The backend also answers an empty list without opening a transaction,
since there is nothing to check and nothing to write.
Relates to GHSA-j4vc-cmf6-jhr7
AI-assisted-by: deepseek-v4.1-flash
* 🐛 Restrict the team invitation token and list to admins
The token of a team invitation is a bearer credential: whoever holds it
accepts the invitation with the role of the invitation row. The RPC that
mints it only required edition permissions, while the rest of the
invitation commands require admin, so a team editor could get the token of
any pending invitation, including the ones that grant the owner role.
The token now requires admin, and the token of an owner invitation is
restricted to the team owner: an admin cannot create nor promote an owner
invitation, so it cannot keep its token either. It reuses the error code
already used for that rule.
Minting the token now leaves an audit event named as an action, carrying
the granted role and the id of the invitation, so the extraction does not
go unnoticed.
The list of pending invitations is admin only as well: it carries the
email of the invited person and the role offered, and the dashboard was
painting those emails to any member. The frontend catches the permission
error and shows the permission notice instead, and the copy action is not
offered for an owner invitation, which the backend rejects for an admin.
The five invitation commands now answer with the same permission error,
so they speak one language.
Relates to GHSA-4mmc-j8rh-74pf
AI-assisted-by: minimax-m3.1-flash
* 🐛 Clear the cached invitations and gate the list on team admin
The pending invitations are a team admin only list. The dashboard still
offered the entry to every member and keyed the section on the invite
policy of the organization, so a team admin blocked by that policy saw
the no-permission notice although the backend lets them list.
- `fetch-invitations` answers a denied refetch with an
`invitations-fetched` event carrying an empty list, so a demoted admin
does not keep the cached emails and the header no longer paints the
invite button from a stale list.
- The header tabs and the team options dropdown hide the invitations
entry without `:is-admin`, which already includes the team owner.
- `invitations-section-content` keys the section on `:is-admin`, and the
invite policy only gates the invite actions: resending keeps the
`can-invite?` check, deleting and row selection only need team admin.
AI-assisted-by: deepseek-v4.1-flash
The Playwright config gives the retrying expects 40 seconds on CI and 5
seconds elsewhere, but the default and ds projects set their own expect
block for the screenshot tolerance, and a project block replaces the
top-level one instead of merging with it. On CI those projects have run
with Playwright's 5 second default.
That is too short for the first dashboard load on a busy runner, where the
dashboard module is fetched lazily: specs that wait for the dashboard
heading time out and pass on the retry (flaky), or fail after the
retries. In the shard of one recent run that was 7 flaky and 4 failed
specs out of 112, and develop itself failed the same families of specs on
several runs the same day.
Name the timeout once and repeat it in both projects. A probe config that
imports this one and polls a condition that never holds reports 40000 ms
for both projects with this change, and 5000 ms without it. The
render-wasm project already repeats its own value.
AI-assisted-by: claude-opus-5-5
AI-assisted-by: claude-sonnet-5-5
Signed-off-by: Filip Sajdak <filip.sajdak@siili.com>
team-container* called mf/deref only after returning early for a team id
that is not a uuid. When the same component rendered once without a team
id and then with one, the number of hooks changed between the two renders
and React threw "Rendered more hooks than during the previous render"
(error #310), which sent the user to the internal error page. The reverse
order throws "Rendered fewer hooks than expected".
Call the hook on every render and keep the uuid check in the condition
that builds the providers.
Two tests mount the component in jsdom and render it with a team id that
arrives and with one that leaves; both fail without this change.
Closes#12728
AI-assisted-by: claude-opus-5-5
AI-assisted-by: claude-sonnet-5-5
Signed-off-by: Filip Sajdak <filip.sajdak@siili.com>
When components whose name matches the variant container are moved into
it, removing the container name leaves an empty value. Combining several
components named the same produced "Value 1" for the first variant and
empty values for the rest, so variants shared the same combination.
Assign the first unused "Value N" to the last property when all computed
values are blank, tracking values given within the same batch.
Combine moves the remaining mains into the container one at a time, in
the combine order, so the generated values follow that order instead of
the layer order.
Closes#12878
"Add to an organization" in the team settings opens a modal but was an
<a> without href: the keyboard could not reach it. It is now a
<button type="button"> that keeps its text-link look (accent color,
medium weight, underline on hover, the same box), so Tab reaches it and
Enter or Space opens the modal.
New visual test "Shows the Add to an organization link", with fixtures
for a team in no organization and an organization the user belongs to:
0 px of difference at rest and on hover, and 0 px on the whole settings
page.
AI-assisted-by: claude-opus-5-5
* ⚡ Keep the translation flag on undo and redo of a move
Previously undos and redos always forced a component sync + thumbnail
rerender for every component touched even if the underlying commits were just
translations. This propagates the translation flag to undos and redos and
propagates it to commit-changes. An entry merged from several undos/redos is
a translation only if all of its undos/redos are translations.
This reduces a UI freeze when undoing a move of a board with 453 components
from 2.42s -> 0.22s.
AI-assisted-by: claude-sonnet-5-5
* :translation? -> :translation
---------
Co-authored-by: Andrey Antukh <niwi@niwi.nz>
* ⚡ Send objects-map pages to the worker without a second encode
When switching between pages on a large file e.g Material Design Icons, there's
some UI freeze from :index/initialize encoding object map shapes to send to the
worker. An objects map already stores the encoded JSON for each shape, and
`encode-str` was wrapping those strings in a second layer of JSON on the main
thread.
We can just transmit the already encoded JSON in a js/Map alongisde the
payload, similar to :blob, so structured clone just copies the strings verbaitm
without re-encoding. To do this this PR adds two functions to ObjectsMap that
converts to and from a js/Map.
The "Main components" page of the Material Design Icons has ~30k objects, so
this reduces the freeze when switching pages from 306ms -> 189ms (1.63x) on a
release build.
AI-assisted-by: claude-sonnet-5-5
* Split property tests out into new deftest
---------
Signed-off-by: Luke Lau <luke_lau@icloud.com>
Co-authored-by: Andrey Antukh <niwi@niwi.nz>