The bulk profile creation endpoint creates already active profiles that
skip email verification and onboarding, so it should not be reachable on
production deployments. Add the `nitrate-bulk-create-profiles` flag,
disabled by default, and reject the call when it is not enabled.
Signed-off-by: Juanfran <juanfran.ag@gmail.com>
Schema validation reported a generic "Invalid data" message. Report the expected schema and the received value, with a bounded cycle-safe renderer so the error path cannot itself crash.
Fixes#10072
Signed-off-by: Akshit Nassa <akshitnassa412@gmail.com>
Co-authored-by: Akshit Nassa <akshitnassa412@gmail.com>
Move all development tools from tools/ to scripts/ for consistency.
Rename lint/fmt/check-fmt to lint-clj/fmt-clj/check-fmt-clj to clarify
they target Clojure specifically. Remove unused scripts (attach-opencode,
start-opencode, start-opencode-server) and the backport-commit skill.
Update all internal references across .serena/, AGENTS.md, and
CONTRIBUTING.md to point to the new script locations. Simplify
CONTRIBUTING.md by delegating module-specific fmt/lint instructions
to the respective serena memories.
AI-assisted-by: deepseek-v4-flash
The workspace route can be reached without a `:file-id` query parameter
(e.g. `/#/workspace?team-id=...`). When that happened, `workspace*` was
emitting `dw/initialize-workspace` with a nil file-id, which stored nil
in `:current-file-id`. The `fetch-profiles` event then read nil from
state and called `:get-profiles-for-file-comments` with `{:file-id
nil}`, producing a 400 response.
Move the `use-equal-memo` calls for `file-id` and `page-id` from
`workspace*` up to `workspace-page*`, and guard the render with
`(when (uuid? file-id) ...)` so `workspace*` only mounts when `file-id`
is a valid uuid. Since `workspace*` never mounts with a nil `file-id`,
`initialize-workspace` is never emitted with nil, and the 400 is
prevented at the source.
AI-assisted-by: minimax-m3
* 🎉 Add page multi-selection in the workspace sitemap
* ♻️ Simplify page selection state updates with single assoc
* 🐛 Fix SCSS issue
* ♻️ Update some components to new syntax
* ♻️ Adapt SCSS to the new guidelines
* ♻️ SCSS cleanup
---------
Co-authored-by: Luis de Dios <luis.dedios@kaleidos.net>
* ✨ Add list view toggle for dashboard files
* ✨ Add drop files visual feedback
* ♻️ Use radio buttons component from DS
* ♻️ Use hook to keep layout status
* ♻️ Refactor code and SCSS
---------
Co-authored-by: Luis de Dios <luis.dedios@kaleidos.net>
* 🐛 Fix geometry sync between mains and rotated component copies
Rotating a copy instance as a whole marked every shape inside it as
touched for geometry, so later geometric changes in the main (e.g. a
resize) were no longer propagated to that copy, while non-geometric
ones (e.g. fills) still were. And on paths where geometry did get
written to a rotated copy (e.g. resetting overrides), the sync engine
compensated only the roots' position delta, so the written values wiped
the copy's rotation back to 0.
Model the instance root's transformation as inherited, overridable
content, asymmetric to position (which remains free per-instance
placement):
- An untouched copy follows the main's transformation verbatim,
including rotation and flips (preserving the BUG #13267 semantics
that rotating a main propagates to its copies).
- Transforming a copy as a whole overrides only its ROOT: check-delta
compares the root's rotation/flips absolutely, but the descendants
relative to their root, so they merely follow and stay untouched.
- When a copy root's geometry is overridden, update-attrs expresses the
main's geometry in the copy's own frame: reposition-shape applies the
roots' relative transformation (rotation/flips) around the dest root
center in addition to the position delta. Geometric changes from the
main then keep propagating to the rotated copy, landing correctly in
its rotated frame instead of destroying its placement.
Covered by the new composable test case
case-n-geometry-sync-with-rotated-instances: an 8-variant sweep over
optional copy rotation, optional main rotation, and one of a fills or
height edit on the main child, asserting the whole model through the
real workspace events (the new rotate operation dispatches
dwt/increase-rotation, whose apply-modifiers step runs the check-delta
classification under test; change-height dispatches
dwt/update-dimensions and implements IPropertyCheck so one-of sweeps
can mix property and geometry edits). Verified by temporarily reverting
the fix: the case then fails with 6 assertion failures and passes again
with the fix restored.
Fixes#10109
AI-assisted-by: claude-fable-5
* 🐛 Fix synchronization problems
---------
Co-authored-by: alonso.torres <alonso.torres@kaleidos.net>
Relative operators were accepted in operand position, so "10+*3" silently evaluated to 310 instead of being rejected. Make negation a first-class operand so legitimate negative operands ("10 + -3") keep working.
Fixes#9581
Signed-off-by: Akshit Nassa <akshitnassa412@gmail.com>
Co-authored-by: Akshit Nassa <akshitnassa412@gmail.com>
Co-authored-by: Andrey Antukh <niwi@niwi.nz>
* 📚 Add comprehensive documentation for .penpot file format (v3)
Create user-facing documentation for the .penpot binfile format to help
developers and power users understand and inspect the ZIP+JSON structure.
- Add technical specification with complete schema reference for all JSON
files (manifest, file metadata, pages, shapes, library assets, storage
objects, plugin data)
- Add user-friendly overview explaining the format structure, inspection
methods, and version history
- Update export-import-files.njk to clarify current format is not deprecated
and note that v2 was never released
- Add cross-links between documentation pages
- Include source code references to authoritative malli schemas
AI-assisted-by: qwen3.7-plus
* 📎 Add playwright dependency to the root package.json
* 📚 Add browser based .penpot file inspector to docs
Add a client-side, no-build inspector for .penpot (v3) files. The tool
runs entirely in the browser: JSZip is loaded lazily from a CDN, the
file is never uploaded. It provides a collapsible file tree, syntax-
highlighted JSON viewer with search, image previews, a summary panel
with file/shape/storage counts, shape summary cards with color swatches,
and clickable UUID cross-references with backlinks.
The inspector is added at
docs/technical-guide/developer/data-model/penpot-file-inspector.njk
and linked from the format spec and the user-facing format page.
AI-assisted-by: minimax-m3
* 📚 Use full page width and 2-column layout for inspector
The inspector previously sat inside the docs site's 42rem content
column, which forced a stacked layout and wasted the wide viewport.
- Hide the docs page-navigation sidebar on this page via :has()
- Use a 2-column CSS grid: file tree (280px, sticky) on the left,
content (flex: 1) on the right
- Restore the directory tree as a permanent left-rail navigation
(it was removed when the picker was first introduced, then added
back as a collapsible panel; a sticky rail is a better fit now
that horizontal space is plentiful)
- Remove the tree toggle button — the tree is always visible
- Collapses to 1 column on viewports below 900px
AI-assisted-by: minimax-m3
* 💄 Indent nested JSON values in inspector
The JSON tree view in the inspector was rendering all properties at
the same indent level, making it hard to see which values were
nested inside objects or arrays. Root-level properties and deeply
nested ones looked identical.
Add padding-left and a subtle vertical guide line to .jchildren so
each nesting level is visually distinct. Bump the toggle column to
1.2em and add a touch of vertical padding to .jrow for breathing
room.
AI-assisted-by: minimax-m3
