589 Commits

Author SHA1 Message Date
alonso.torres
11ac2f8989 ✨ Migrate swap slots to override groups and remove them
The migration 0033 stores every swap of a file as an override group.
A swap made in a copy is paired with the child of the near main that
holds the same position, as sync paired it; any other slot is dropped.
All pairings are found on the data as it was, so swaps nested in swaps
pair against the content of the outer one, and libraries pair the same
whether they are migrated or not. A head that refers to its own slot
only inherited it, and drops it even when its near main cannot be
reached. Any other slot that matches no child, or whose near main is in
a library that is not loaded, keeps the slot as its ref, so validation
reports it. An import, which migrates its files before it links their
libraries, leaves those slots and converts them once the libraries are
linked. A migrated head that sits elsewhere than the child it replaces
would place it gets its geometry marked as touched, so the first sync
does not move it. Migrated and new files carry the feature
components/swap-group, so a client that still writes slots cannot open
them.

Validation checks the new form: :misplaced-slot reports any slot,
:misplaced-swap-group the group anywhere but on a nested copy head in a
copy, :ref-not-in-near-main a nested copy head whose ref is not a child
of the near main of its parent, and :duplicate-ref two children of a
copy that refer to the same main shape. Each has a repair.

Nothing but the migrations reads slots any more: the slot branches go
from sync, swap, switch, reset, detach, paste, duplicate and move. The
helpers that read and write a slot on a shape move to files/swap-slots,
and the ones that follow refs to files/comp-processors. The graph
projection drops the FillsSwapSlot edge, the components debugger shows
the component a swapped head takes its content from, and the plugin API
documents componentRefShape for a swapped copy. The swap tests are
named after what they check.

Benchmark (lower quantile, ms; baseline / now / ratio):
  deepest-edit-through-three-levels    35.2 /  34.6 / 0.98
  edit-through-a-chain-of-dependents   68.9 /  63.5 / 0.92
  library-update-into-copies           83.1 /  76.4 / 0.92
  main-edit-into-10-copies              1.8 /   1.6 / 0.87
  main-edit-into-100-copies            15.4 /  15.1 / 0.98
  main-edit-into-1000-copies          153.1 / 148.8 / 0.97
  variant-switch-into-copies           32.1 /  26.4 / 0.82

AI-assisted-by: claude-opus-5-5
2026-11-10 20:21:15 +01:00
alonso.torres
234fb7564a ✨ Store a swap inside a copy as an override group
A swapped copy sub-head now keeps the shape-ref of the main child it
replaces (its position), takes its content from its own component, and
carries the touched group :swap-group. It used to point at the root of
the new component and store a swap slot naming the replaced child.

Every path reads and writes that form:
- sync pairs a swapped head with the child it replaces and syncs it
  from its own component; it takes from the replaced child only its
  placement: position, constraints and layout item attributes;
- reset undoes a swap in place, keeping the head's id and the other
  overrides of the copy;
- detach, paste and duplicate make a head that leaves every copy level
  a plain copy of its own component, and advance a deeper one by
  position; the children of a swapped head never advance;
- a variant switch keeps a swap stored this way, and counts only the
  copy's own swap, not one made in a main of the chain;
- update main replaces the main child with a clone of the swapped one,
  and from a swapped head updates its own component;
- a swap inside a copy keeps the old shape-ref and adds :swap-group;
  swapping back to the component of that position gives a plain nested
  copy whose children refer to the position's children; a swap inside
  a main is a plain nested copy.
Files that hold swap slots keep working until a migration converts
them. The component memories describe the model.

This fixes what came from the slot: reset of a swapped child cleared
the other overrides of the copy (F12) and gave copies of a main new
ids (F66); update main left a swap mark (F16); a second variant switch
lost the overrides (F29); grid cells did not pair a swapped child
(F44); a swapped child did not follow its position (F65). F49 keeps
failing, in another form.

The tests that asserted slots now assert the override group; the tests
of the slot code build the old form with :as-slot?.

Benchmark (lower quantile, ms; baseline / now / ratio):
  deepest-edit-through-three-levels    35.2 /  35.4 / 1.01
  edit-through-a-chain-of-dependents   68.9 /  68.7 / 1.00
  library-update-into-copies           83.1 /  77.5 / 0.93
  main-edit-into-10-copies              1.8 /   1.6 / 0.92
  main-edit-into-100-copies            15.4 /  15.4 / 1.00
  main-edit-into-1000-copies          153.1 / 151.1 / 0.99
  variant-switch-into-copies           32.1 /  32.4 / 1.01

AI-assisted-by: claude-opus-5-5
2026-11-10 20:21:15 +01:00
alonso.torres
9acb64370c 🔥 Remove the components v1 leftovers
No components v1 file reaches the code any more: opening one fails the
feature check, and imports reject it or give it the feature. What only
served v1 goes:

- validate-file and validate-file-affected no longer skip a file
  without components/v2;
- the root of a deleted component is found by its main instance id
  only, in the type helper and the component sprite;
- generate-sync-library, which synced shapes inside live components,
  and the live components in containers-seq, so asset usages walk the
  pages only (deleted components keep their objects and still sync);
- the unused :components-v2 file option, from the schema, the file
  data and the test fixtures; stored files that carry it still
  validate;
- the team migration-in-progress check and its frontend alert, which
  leaves ephimeral features out of the team comparison;
- the components v2 introduction dialog, its styles and icons, and the
  :v2-info-shown profile prop;
- the graphic asset events and builders and the reads of graphics in
  the selection (the :add-media, :mod-media and :del-media changes stay,
  so stored changes still apply), and the uncalled render-page and
  render-components helpers.

AI-assisted-by: claude-opus-5-5
2026-11-10 20:21:15 +01:00
alonso.torres
6bdb9b6404 ✨ Reject imported components v1 files that have components
Both binfile importers stored a file without the components/v2 feature
as a v2 file, though its component data was never migrated. Such a file
is now rejected with :file-in-components-v1, the code that opening a v1
file already raises, when it has components or shapes linked to them
(:component-id, :shape-ref or :main-instance). A file without component
data takes the feature and imports as before.

Since every imported file now has the feature before the pending
migrations are registered, the no-op components/v2 migration goes.

The import dialog explains the rejection: the entry says that the file
uses an old type of components that Penpot no longer supports, with its
own text, as errors.deprecated talks about opening a file.

AI-assisted-by: claude-opus-5-5
2026-11-10 20:21:15 +01:00
alonso.torres
256d6001a0 ✨ Test what copy texts keep through sync and switches
Add a battery of tests for text overrides in copies.
- A short notation for text content in tests (thtx): paragraphs of
  runs with short style names, read back with equal runs joined,
  edits in the notation, set-text and set-content through the change
  path, and the override rule for texts (override-units), which says
  which overrides a copy must hold against its main.
- Sync matrix: every whole-text copy edit against every main edit,
  plus the cards of the worked examples, the "Hello world" table, a
  token on a copy, typographies and a library color sync. Where the
  code differs from decisions (k) to (o), the result is pinned
  against F72 to F80.
- Switch matrix: copy edits against variants that differ in letters,
  size, color, a new line or a bolded word; F76, F77, F79 and F81
  pinned.
- Composable case BA: EditText also edits fills, font family and a
  whole text; the copy and the main change different styles, then
  reset or update main, in both runners; F72 pinned.
- Editor output: the content the WASM and v1 editors commit when a
  copy text is typed into, retyped, split with Enter and has a word
  bolded, recorded in the workspace and replayed on a copy. Typing
  sets only the text groups and a style change no text override;
  F79 pinned on both editors' content.
2026-11-10 20:21:15 +01:00
alonso.torres
62f99e0493 ✨ Make the component test suites fail when their claims break
A review found tests that would pass with what they test broken.
- Runners: both judge one variant at a time, fail a variant with no
  assertion and a known-failure mark that applies nowhere, and give
  the asserter the state the operations produced. The pure runner
  validates the final file and rejects operations of unknown kind.
  The frontend interpreter fails a step when the store reports an
  event error (Potok only logs it), reports asserter errors against
  their case, and stops the watchers that install! starts.
- Nodes drive the real code: a main root rename goes through
  end-rename-shape, and the clipboard's advance of nested copies is
  one common function, cll/advance-copied-objects, that copy-selected
  and both test paths call.
- Cases N, AH, AI, AK, AD, AE, K, C, H, S, AY, I, Y, AX and F check
  what they claim; O, R and T get real sizes.
- Stricter common unit tests found F60 (a repair detaches healthy
  copies), F61 (a switch drops a fixed-sizing size), F62 (the ref
  chain never stops at its target) and F63 (latent); all pinned.
- Frontend library tests: the RPC double records on subscribe, the
  dropped commits check that nothing syncs, and the link and share
  tests check the events sent.
- Plugin suite: OpSwap and OpDetach throw when the API call did
  nothing, and case AB checks that the reset head is an instance of
  the original component.
- The composable suite memory records the new rules.
2026-11-10 20:21:15 +01:00
alonso.torres
680b08dcaf ✨ Make composable interpreter steps wait for pending work
The composable interpreter treated a step as done after a 60 ms gap
with no commits, and treated its 2 s timeout as done too. Slow sync or
reflow work could finish after the step, so a case could assert on a
half-synced file.

Each event step now waits, as the plugin waitForLayoutUpdate does,
until every pending work tracked by the reflow registry has drained:
the watcher's sync wait, the sync it starts, and layout and text
reflow. A step that does not drain within 2 s fails the test and names
the work still pending, and the next variant starts with nothing
pending.

The tests cover an edit with a deliberately slow sync, undo and redo
steps that must wait for the watcher's touch-component, translation
and derived commits, a sync that never finishes, and a restart of the
edit watchers, which must keep the undo entries of an edit the same.

Also in this commit:

- Keep page-less changes from adding a nil page. Applying a commit locally
  rebuilds the object indices of every page its changes name. Changes that touch
  no page, such as :mod-component, name none, and their nil page id was rebuilt
  too: the file data in the store gained a page under a nil key holding
  {:objects nil}. Every component touch after an edit to a main added it, and
  undo never removed it.
- Check undo and redo of every step in the composable cases. The composable
  cases tested undo only where a case asked for it, so a change generator with a
  wrong inverse, or a step that splits into several undo entries, went
  unnoticed.
- Add operations and cases to the composable component suites. The composable
  runners could edit, add, remove and move children, swap and switch, but not
  run the other component operations.
- Test component validation, repair and library asset sync.
- Add a component sync benchmark with a recorded baseline. The coming refactors
  and fixes change sync code, and a slowdown must be seen and explained in the
  commit that causes it.
- Tidy the composable suite and make its cases stricter.
- Test the component sync paths no test reached. A coverage run found sync paths
  that no test ran.
- Test variant events, token sync and switch overrides. The variant events had
  almost no frontend tests, and several switch, paste, token and restore paths
  never ran.
- Test the file and container helpers and the library events. The component
  helpers of types/file and types/container and the library events of the
  workspace had the lowest coverage left.
2026-11-10 20:21:15 +01:00
alonso.torres
61ec544881 🐛 Hold the sync wait for every local commit
The component watcher opened its :sync-file wait only for commits saved
to the undo stack. Undo and redo commit without it, so a wait such as
the plugin waitForLayoutUpdate returned before the watcher had handled
them. Translation and derived commits were filtered out before the wait
opened.

Open the wait for every local commit of a file and close it once the
watcher has decided what to do: sync, only touch the component, or
drop the commit. Dropped commits close it right away.

Add wrf/pending, a snapshot of the pending work, for tests and
diagnostics.
2026-11-10 20:21:14 +01:00
alonso.torres
7d0b9e0b59 ♻️ Share the workspace edit watchers with the test harness
The composable test interpreter wired its own copy of the undo stack
subscription and started only the component watcher, so it reacted to
edits differently from the app, and a missing subscription failed
silently.

Gather the subscriptions that react to edits while a file is open
(undo stack, layout updates, text reflow, WASM text measurement) in
initialize-edit-watchers, stopped by finalize-edit-watchers, and the
per-page component and token watchers in watch-library-changes. The
workspace and the interpreter both start them.

Starting the edit watchers again replaces the running ones. A file
reload starts the workspace again without finalizing it, which left two
undo stack watchers running, so an edit added an extra undo entry.
2026-11-10 20:21:14 +01:00
alonso.torres
106572a2d6 ✨ Run the composable component cases on the JVM
The composable test engine, nodes, setups and cases lived in the
frontend test tree, so only the frontend interpreter could run them.

Move them to CLJC test helpers under app.common.test-helpers.composable
and add a pure runner (comp.runner) that does what the workspace does
around each operation, without the frontend store:
- after a user operation it syncs the changed components until none is
  left, as the frontend watcher does with one pass per sync commit;
- the operation and its syncs form one undo group, and the undo node
  reverts the latest one;
- it validates the file once the sync or the undo has settled.

Each node declares its kind: assembly, user, undo or frontend-only.
User nodes record the production changes they apply, and the runner
throws when a node breaks that. The swap and switch nodes build their
changes with the production clv/generate-component-swap-in-place.
Rotate and ChangeHeight need the frontend placement step, so the pure
runner rejects them.

The cases are zero-arg functions in comp.cases, shared by the frontend
interpreter and common-tests.logic.composable-sync-test. The latter
runs cases B to M and the new case O, a switch of an overridden copy,
on the JVM and in JS. Case N and the rotation case stay frontend-only.
2026-11-10 20:21:06 +01:00
Andrey Antukh
671ff4a05f Merge remote-tracking branch 'origin/staging' into develop 2026-11-10 20:06:46 +01:00
Andrey Antukh
e4fcc663c0 Merge remote-tracking branch 'origin/staging-2.19.x' into staging 2026-11-10 18:09:07 +01:00
Andrey Antukh
1db1487c7f
🐛 Require thread access when marking threads as read (#12894)
* 🐛 Require thread access when marking threads as read

mark-all-threads-as-read took any list of thread ids and wrote the read
status of the caller on each of them, without checking that the caller
can access the file that owns the thread. It was the only comment
mutation that did not check permissions, and it took the ids as an
unbounded array, so a single request could keep a database connection
and a transaction open for a long time.

The rpc now resolves the threads in one query and checks the comment
permissions of every distinct file, answering not-found when a thread
does not exist or is not accessible. Both cases answer the same error
on purpose, so the response cannot be used to tell existing threads
apart.

The status rows are now written with a single insert, keeping the
modified-at date one second in the future that makes the thread count
as read. Repeated ids are deduped, the command returns nil again like
the sibling commands with no result, and the schema limits the number
of threads per call to 500 while the dashboard sends the ids in batches
of that size.

Tests cover access rejection, unknown threads, mixed batches that write
nothing, repeated ids, empty lists, marking twice, and the frontend
batch split.

Relates to GHSA-j4vc-cmf6-jhr7

AI-assisted-by: minimax-m3.1-flash

* 🐛 Refresh the unread list when a batch fails

The dashboard sends the thread ids in batches of 500 and each batch
commits on the server. A failure in a later batch left the unread list
stale: the re-read only ran when every batch succeeded, so the threads
already marked as read stayed visible as unread.

The re-read now runs in both paths. On failure the event is emitted
before the error is propagated, so the error toast still shows and the
success toast stays limited to a full success.

The backend also answers an empty list without opening a transaction,
since there is nothing to check and nothing to write.

Relates to GHSA-j4vc-cmf6-jhr7

AI-assisted-by: deepseek-v4.1-flash
2026-11-10 15:54:11 +01:00
Andrey Antukh
8510daef52
🐛 Restrict the team invitation token and list to admins (#12892)
* 🐛 Restrict the team invitation token and list to admins

The token of a team invitation is a bearer credential: whoever holds it
accepts the invitation with the role of the invitation row. The RPC that
mints it only required edition permissions, while the rest of the
invitation commands require admin, so a team editor could get the token of
any pending invitation, including the ones that grant the owner role.

The token now requires admin, and the token of an owner invitation is
restricted to the team owner: an admin cannot create nor promote an owner
invitation, so it cannot keep its token either. It reuses the error code
already used for that rule.

Minting the token now leaves an audit event named as an action, carrying
the granted role and the id of the invitation, so the extraction does not
go unnoticed.

The list of pending invitations is admin only as well: it carries the
email of the invited person and the role offered, and the dashboard was
painting those emails to any member. The frontend catches the permission
error and shows the permission notice instead, and the copy action is not
offered for an owner invitation, which the backend rejects for an admin.

The five invitation commands now answer with the same permission error,
so they speak one language.

Relates to GHSA-4mmc-j8rh-74pf

AI-assisted-by: minimax-m3.1-flash

* 🐛 Clear the cached invitations and gate the list on team admin

The pending invitations are a team admin only list. The dashboard still
offered the entry to every member and keyed the section on the invite
policy of the organization, so a team admin blocked by that policy saw
the no-permission notice although the backend lets them list.

- `fetch-invitations` answers a denied refetch with an
  `invitations-fetched` event carrying an empty list, so a demoted admin
  does not keep the cached emails and the header no longer paints the
  invite button from a stale list.
- The header tabs and the team options dropdown hide the invitations
  entry without `:is-admin`, which already includes the team owner.
- `invitations-section-content` keys the section on `:is-admin`, and the
  invite policy only gates the invite actions: resending keeps the
  `can-invite?` check, deleting and row selection only need team admin.

AI-assisted-by: deepseek-v4.1-flash
2026-11-10 15:53:43 +01:00
Filip Sajdak
90d98b1989
🐛 Call the team hook on every render of the team container (#12920)
team-container* called mf/deref only after returning early for a team id
that is not a uuid. When the same component rendered once without a team
id and then with one, the number of hooks changed between the two renders
and React threw "Rendered more hooks than during the previous render"
(error #310), which sent the user to the internal error page. The reverse
order throws "Rendered fewer hooks than expected".

Call the hook on every render and keep the uuid check in the condition
that builds the providers.

Two tests mount the component in jsdom and render it with a team id that
arrives and with one that leaves; both fail without this change.

Closes #12728

AI-assisted-by: claude-opus-5-5
AI-assisted-by: claude-sonnet-5-5

Signed-off-by: Filip Sajdak <filip.sajdak@siili.com>
2026-11-10 11:32:58 +01:00
Alonso Torres
4fb0ea9eee
🐛 Give unique values to same-name components combined as variants (#12881)
When components whose name matches the variant container are moved into
it, removing the container name leaves an empty value. Combining several
components named the same produced "Value 1" for the first variant and
empty values for the rest, so variants shared the same combination.

Assign the first unused "Value N" to the last property when all computed
values are blank, tracking values given within the same batch.

Combine moves the remaining mains into the container one at a time, in
the combine order, so the generated values follow that order instead of
the layer order.

Closes #12878
2026-11-10 09:16:08 +01:00
Luke Lau
cd1ece4beb
⚡ Keep the translation flag on undo and redo of a move (#12870)
* ⚡ Keep the translation flag on undo and redo of a move

Previously undos and redos always forced a component sync + thumbnail
rerender for every component touched even if the underlying commits were just
translations. This propagates the translation flag to undos and redos and
propagates it to commit-changes. An entry merged from several undos/redos is
a translation only if all of its undos/redos are translations.

This reduces a UI freeze when undoing a move of a board with 453 components
from 2.42s -> 0.22s.

AI-assisted-by: claude-sonnet-5-5

* :translation? -> :translation

---------

Co-authored-by: Andrey Antukh <niwi@niwi.nz>
2026-11-09 20:47:42 +01:00
Luke Lau
6846afd08c
⚡ Send objects-map pages to the worker without a second encode (#12811)
* ⚡ Send objects-map pages to the worker without a second encode

When switching between pages on a large file e.g Material Design Icons, there's
some UI freeze from :index/initialize encoding object map shapes to send to the
worker. An objects map already stores the encoded JSON for each shape, and
`encode-str` was wrapping those strings in a second layer of JSON on the main
thread.

We can just transmit the already encoded JSON in a js/Map alongisde the
payload, similar to :blob, so structured clone just copies the strings verbaitm
without re-encoding. To do this this PR adds two functions to ObjectsMap that
converts to and from a js/Map.

The "Main components" page of the Material Design Icons has ~30k objects, so
this reduces the freeze when switching pages from 306ms -> 189ms (1.63x) on a
release build.

AI-assisted-by: claude-sonnet-5-5

* Split property tests out into new deftest

---------

Signed-off-by: Luke Lau <luke_lau@icloud.com>
Co-authored-by: Andrey Antukh <niwi@niwi.nz>
2026-11-09 17:35:20 +01:00
Luke Lau
943e63a99e
⚡ Group color updates in selections (#12875) 2026-11-09 12:08:36 +01:00
Andrey Antukh
1df2941576 Merge remote-tracking branch 'origin/staging' into develop 2026-11-09 10:42:28 +01:00
Andrey Antukh
0ea6d166f0
✨ Add a session origin model to auth events (#12856)
* 🐛 Return the full profile from the LDAP invitation branch

The invitation branch responded with only {:invitation-token token},
so the session start received a map without id or auth-backend. With
the new auth-origin vocabulary that map fails validation and the login
breaks in development and tests; in production the event would be
emitted without a channel.

Return the profile plus the token, like the regular branch, and cover
both branches with RPC-level tests.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* 🐛 Mint an auth token in the OIDC callback with the invitation inside

The callback used the invitation JWE as the session token, so the
frontend landed directly on token verification and never ran the
regular session start: no signin event, no teams, no host hook.

Always mint an :auth token and carry the invitation in its claims.
Token verification returns the claims verbatim, so login-from-token
attaches the invitation to the profile and logged-in does the rest,
the same pattern the verify-email token already uses.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* ✨ Keep the session origin in the telemetry shadow rows

The anonymisation filter drops every string unless it is on a short
allowlist. Add source and activation next to lang and auth-backend so
the shadow copy keeps them; the email and the full name are still
dropped and the email domain is still derived from the email.

The filter keeps its two bindings: the transducer discards everything
that is not a UUID, a boolean or a number, so the allowlist is applied
on the filtered map, never on the raw props.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* ✨ Describe the signup outcome with activation, not with action

The three success branches of register-profile labelled a new account
as "login", "email-verification" or "accept-invitation", so the event
contradicted its own name and the value only lived in context, where
the analytics consumers never read it.

Add activation to the event props and drop action from those branches:
the name already says it is a signup, and a constant action would only
add noise. The retry branches keep their action in context because
there it distinguishes four different outcomes.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* ✨ Describe the session origin in the signin event

The event carried the profile but never said why the session started:
the only field that tried was frontend metadata that never leaves the
browser, and several flows filled it with the wrong value.

Add a small closed vocabulary (source, auth-backend, activation,
from-invitation) and compose it from the profile when signin is
emitted. The assertion fails in development and tests and is elided in
the release build, so a bad value cannot break a real login.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* ✨ Emit the session origin from every login entry point

The four emitters stamped a free-form string as metadata, so the
session event could not rely on it: two flows that were signups wrote
the same value as a login.

Route them through origin-meta: password and LDAP logins declare
source login, register declares source register with activation
immediate, and login-from-token derives both from the token issuer:
:auth for a login and :verify-email for a signup that needed the
email confirmation.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* 🐛 Send the invitation signups through the regular session start

Registering from a team invitation link navigated by hand to token
verification, so the session start never ran: no signin event, no
teams, no host hook. The same navigation was copied in four places.

Teach login-from-register to carry an optional invitation token,
extract the profile decoration into with-register-origin, and call it
from the four sites instead of the hand-written navigation.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* 🐛 Resolve the invitation without waiting for the teams

Registering from an invitation link now goes through the session
start, and that start only navigates after the teams request
completes. fetch-teams has no error handling, so a network failure
there would leave the invitation unaccepted and the user on the signup
screen with a session already minted.

Move the invitation navigation out of the teams path: it emits as soon
as the profile carries a token, and the teams path emits nothing for
an invited profile so it cannot move the user away from the token
verification screen.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* 📚 Document the session origin vocabulary and the invitation flow

Add a focused memory with the four fields, where each value comes from,
the table of flows, the LDAP exception and the invitation path through
logged-in, and link it from the frontend routing.

Update the audit-log memory: source and activation are now on the
telemetry allowlist, activation lives in props and action only exists
on the retry rows.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash

* 📎 Cover the invitation session start and fix the auth memories

The invitation flows and the token decoration in login-from-token were
only covered by helper tests, so removing the guard that keeps the
teams path from navigating, or the token attach, broke the behaviour
silently.

Run the events through ptk/watch with a teams-fetched event as input:
an invited profile navigates to the token verification screen and
never to the dashboard, and the signin keeps from-invitation. Add the
login-from-token cases with and without the token, and fix the memory
statements about action, the flow table and from-invitation.

Closes #12849

AI-assisted-by: deepseek-v4.1-flash
2026-11-09 10:11:54 +01:00
Álvaro Tejero-Cantero
87fc15b5aa
🐛 Open the first page in view mode when the URL has no page id (#12687)
A view URL without a page-id crashed builds with assertions enabled:
the viewer passes a nil page-id to `initialize`, whose schema accepted
a missing key but not a nil value. Release builds skip that check and
draw the first page, but every viewer event reads the page from the
route, so zoom to fit and fill, the next-board arrow, Navigate To
interactions, and comment pins did not work.

`initialize` now accepts a nil page-id, `fetch-bundle` makes it
optional, and `bundle-fetched` replaces a route without page-id by one
naming the file's first page. The viewer then initializes again on the
completed route, as it does when the user changes page. A file with no
pages keeps its route.

AI-assisted-by: claude-opus-5-5

Signed-off-by: Álvaro Tejero Cantero <alvorithm@teje.ro>
2026-11-06 13:05:39 +01:00
Andrey Antukh
a77cb2608e
🐛 Normalize stored SVG attribute keys to kebab-case (#12006)
* 🐛 Normalize stored SVG attribute keys to kebab-case

The v3 reader already emits kebab-case keys, but birth stored the
camelCase React prop names, so import and export never converged:
fill rules painted wrongly and filter defs lost their blur.

Birth now normalizes every stored attribute key to kebab-case
through the `svg-props` whitelist (`attrs->kebab-props`), applied on
all element paths of the svg importer, on the file builder and on
defs. svg-raw `:content` is kebab-ized in spelling only and keeps
unknown keys, because the sidebar reads them. Non-spec attrs Penpot
must keep live in `penpot-extra-attrs`, seeded with `:stroke-style`.
Render boundaries translate back to camelCase for React and for the
wasm props, and the shape schema declares the closed kebab contract
derived from that same whitelist, so birth and validation cannot
drift.

Migration `0035-fix-shape-svg-attrs-and-defs` converts old files
once with the birth transforms, and carries back the svg-viewbox
rect normalization the withdrawn `0021` had. That old id leaves
`available-migrations`, so files recording it migrate again through
this one, and the binfile cleaner drops its own svg repair.

Review fixes included here: `setup-opacity` and the blend mode read
the stored keys, gradient stops accept `:style` as a CSS string or a
map, `inherit-attributes` reads `:style` so a child's inline style
beats the inherited group attr per CSS, and the svg-attrs menu shows
spec spelling (`viewBox`, `class`) through `stored-attr-display-name`.

Tests cover the migration, the closed svg-attr schemas and the
import/export round trip; the svg-content schema test pins its
sample seed, which dealt no svg-raw shape on unlucky runs.

Closes #11947

AI-assisted-by: muse-spark-1.3-contributor

* 🐛 Keep legacy svg node tags and transforms valid in migration 0035

The closed svg node schemas require keyword tags and map attrs, but
stored files hold def and svg-raw content tags as strings, and some
node `:attrs` as nil. Migration 0035 left them as they were, so the
file data check that runs after migrating rejected those files and
they could not be opened. `normalize-node-tree` now turns string tags
into keywords and nil attrs into an empty map, at birth and in 0035.

With keyword tags, the svg defs renderer applies the shape transform
to user-space defs. Legacy `:svg-transform` values are plain maps,
which multiply into NaN matrices. `gmt/coerce` turns them into
matrices, in 0035 and in the binfile cleaner, because every v3 import
decodes the transform as a plain map again. Legacy masks and gradients
now render as designed in the svg renderer.

The binfile test helper calls `export-files!` with the current config
keys.

AI-assisted-by: claude-opus-5-5

---------
2026-11-06 12:52:53 +01:00
Andrés Moya
4f02995a3c
🐛 Re-enable adding layout to a variant container (#12879) 2026-11-06 12:11:48 +01:00
María Valderrama
2df4d10bd5
✨ Enforce attribute-based organization permissions (#12868)
* ✨ Enforce attribute-based organization permissions

* 📎 Code review
2026-11-06 11:40:50 +01:00
alonso.torres
1a80e98e62 🐛 Keep Inspect from crashing on a shape whose parent is missing
In a damaged file a shape may point to a parent that does not exist.
The Inspect tab computes the position relative to the parent, so
inspecting such a shape replaced the workspace with the internal error
page. Inspect leaves the position out and logs a warning instead.
2026-11-05 23:59:32 +01:00
alonso.torres
7eacbec245 🐛 Keep comments, focus, thumbnails and text in step with a rollback
A rollback reverts the local data with a rebase, which is not a commit,
so the parts of the workspace that follow commits missed it:

- Comment pins moved in the reverted action stayed where they were, on
  screen and on the server, and pins on a board the rollback removed
  kept pointing to it. They go back to the reverted position, and pins
  on a removed board move to the page root.
- Focus mode stayed on with no shape left when the rollback removed the
  focused ones, and the next shape drawn turned it on again. It ends
  when its last shape goes, and the selection drops removed shapes.
- Component thumbnails kept the rejected look. The thumbnails of the
  reverted mains are rendered and uploaded again, and an upload whose
  shapes changed during the render is skipped.
- Under WASM, an open text editor reset to the reverted content but the
  canvas kept the old layout. It is laid out again.
- A library sync whose save failed showed no update notice again once
  the release undid it. The notice is checked again after that
  rollback.
2026-11-05 23:59:32 +01:00
alonso.torres
88416d2542 ✨ Label the copy kept before a repair in the History panel
Before it repairs a damaged file, the backend keeps a copy of it as a
system snapshot, and the repair notice points to the version history to
find it. The History panel listed that copy among the autosaves, so it
could not be told apart.

The History panel lists the copies kept before a repair as their own
entry per day, "Before automatic repair, <date>", above that day's
autosaves, and the preview of such a copy uses the same label.
2026-11-05 23:59:32 +01:00
alonso.torres
61bf66342b ✨ Tell repairs, damaged data and other files apart in save notices
The notice of a rejected save always said the same thing. It did not
name the file when the user had moved to another one, gave no hint when
the page held data that was already invalid, and replaced the notice of
a backend repair still on screen, since the store holds one toast.

The backend flags a rejection whose first commit touches pages or
components that failed validation before it (:preexisting-damage). The
rejection notice names a file other than the open one, says when the
data was damaged before, and folds into a repair notice still on
screen; a later repair notice folds a rejection notice in the same way.
The notice says that the latest changes were undone, no longer that the
rest of the work is saved.
2026-11-05 23:59:32 +01:00
alonso.torres
27c1c38360 🐛 Apply the changes stored before a save before acknowledging it
The answer to a save lists the changes other sessions stored before it,
such as the backend's repair of a damaged file. When the answer came
before the message with such a change, the saved commit was
acknowledged first, and the late change was then applied on top of the
local edits instead of under them, out of the server's order.

A saved commit of the open file now stays pending until this tab has
received every change the answer lists from other sessions, so a late
change is applied under the local edits. If one does not arrive within
10 seconds, the file reloads.
2026-11-05 23:59:32 +01:00
alonso.torres
302f83f072 🐛 Drop the unsaved edits made on a version a peer restored
When a peer restores a version, the file reloads to it. Edits made on
the replaced version stayed queued: their save failed for good and
locked the workspace, and a rollback or a rebase replayed them on the
restored data.

Loading another version forgets the queued, buffered and saved commits
made on the old one. A save of such a commit, in flight or answered, is
dropped instead of failing or being rolled back, and one save carries
the edits of one version only.
2026-11-05 23:59:32 +01:00
alonso.torres
1d862c0dd5 🐛 Refuse every edit while saves fail
While saves fail the workspace turns read-only, but only some tools
checked it. Edits from the asset, color and token panels, and a drag or
a drawing in progress when the lock came, still made commits that
queued behind the failed save.

commit-changes refuses commits while the save-failure lock holds,
except those that are not user edits: the undo of rolled-back commits,
text position data and component touches. Undo and redo do nothing
while locked. When the lock comes, moves, resizes, rotations, drawings
and the drags of flex, guide and grid handles in progress are cancelled
and commit nothing, and the design panel shows the Inspect view.
2026-11-05 23:59:32 +01:00
alonso.torres
e10ceefb5d 🐛 Keep a file reload from doubling the workspace streams
Reloading the open file (a peer's restore, the fallback of a rollback)
runs initialize-workspace again without leaving the workspace. The
streams the first run started kept running next to the new ones, so a
commit added one undo entry per reload and each notification was
handled twice. The old subscription also sent its unsubscribe after the
new subscribe, which ended the new one on the server.

A new initialize-workspace, text reflow, shape layout or notification
subscription stops the one before it, and a subscription replaced by
one to the same file sends no unsubscribe.
2026-11-05 23:59:32 +01:00
alonso.torres
a6255880da 🐛 Let plugins write in Inspect mode and stop them as viewers
Plugin writes failed whenever the workspace read-only flag was set. The
Inspect tab sets it too, although it only hides the editing tools, so an
MCP agent could not edit while the user was inspecting. A user who
became a viewer had the flag cleared, so plugin writes did not throw and
silently did nothing.

Writes now fail on what makes them unsafe, not on the flag: failing
saves, a user who cannot edit, a version preview or a lost render
context. The error says which one, and the MCP instructions tell the
agent which of them pass by waiting.
2026-11-05 23:59:32 +01:00
alonso.torres
7538d2c187 ✨ Tell plugins and the MCP agent when changes are rolled back
The backend rejects a save after the call that made the changes has
returned, and the workspace then undoes them. A plugin, or the MCP
agent, went on working with shapes that were no longer there and never
learned why.

The rollback event now names the files that lost commits and the pages
and page shapes their changes touched, and plugins get it as the new
`contentrollback` event (`ContentRollback` type) through a subscription
to the store stream, so no rollback is dropped by debouncing.

The MCP plugin keeps the rollbacks it is told about and sends them with
its next task response, failed or not. The server collects them per tool
call and puts a warning first in that tool's response, naming what was
affected; the instructions tell the agent to read the pages again and
redo what is missing.
2026-11-05 23:59:32 +01:00
alonso.torres
9368c83dca ✨ Make plugin writes fail while the workspace is read-only
A read-only workspace (saves failing, a user who cannot edit, a version
preview) only hid the editing tools: plugins, the MCP among them, still
changed shapes, and those edits were never saved. Every plugin write now
throws a read-only error, whatever the throwValidationErrors flag, the
same way a write to a removed shape does.

`check-permission` with a write permission runs the new `check-writable`,
which covers most writers. Writers without a permission check (most
context methods such as create*, group, align or flatten, the z-order
methods, applyTypography on a text range, removing a ruler guide) call it
themselves, and shape setters get it through `check-shape-writable`.
Reads, comments and undo blocks keep working, so a block opened before a
lock still closes.

The MCP instructions tell the agent what the read-only error means.
2026-11-05 23:59:32 +01:00
alonso.torres
8ef3ba628d 🐛 Keep the workspace open when closing the v2 text editor
Closing the v2 text editor with Escape could crash the workspace. The
text options panel renders once more with the editor it saw last, after
closing has disposed it, and reading the style of a disposed editor
throws.

The panel now takes the values from the shape when the editor is gone.
2026-11-05 23:59:32 +01:00
alonso.torres
6426b17c9c 🐛 Fix small save bugs found by the rollback test plan
- Ending a drag inside the frame the shapes already belong to sent an
  empty reparent save and bumped the revision. The move commits only
  when some shape changes parent.
- When a user restored a version, other sessions reloaded the file with
  no notice. They now see a dialog naming who restored which version
  (by its name, else its date), saying that later changes are no longer
  in the file and, when they had changes not saved yet, that those were
  lost.
- Exports drawn in the browser (PDF, SVG, and PNG when the WASM renderer
  draws it) and duplicating a file from the dashboard started at once,
  so an export could show changes a pending save then rejected, and a
  copy could miss queued edits. Both wait for the file's pending saves.
  A client export warns that it includes unsaved changes; a copy warns
  that it misses them.
2026-11-05 23:59:32 +01:00
alonso.torres
94c05589cf 🐛 Keep the UI in step with a rollback
A rollback can remove or change shapes the UI still refers to.

- The selection drops shapes that are gone and the color picker that
  edited them closes.
- The undo history is cut at the reverted action; it stays when no
  entry holds a reverted change. Undo and redo commits carry real undo
  changes and the history index they moved from, so a reverted Ctrl+Z
  puts the change and the index back.
- An open path edition whose shape the rollback changed closes without
  saving the editor's stale copy. The v2 text editor loads the reverted
  text again; the WASM editor already showed it.
- The Alt measurements look the hovered shape up in the current data.
- Plugin setters, resize() and rotate() on a removed shape throw
  "Shape not found", whatever the plugin's throwValidationErrors flag.
2026-11-05 23:59:32 +01:00
alonso.torres
cb26e8a39b ✨ Keep autosave and the workspace alive when saves fail
- A save that failed on a short platform failure (a lost or refused
  database connection, lack of resources, a server shutting down, a
  serialization failure or deadlock, a socket or HTTP timeout, a host
  that did not resolve, an interruption) answered 500, which stops
  autosave. It now answers 503, which the frontend retries. Other I/O
  and database errors keep answering 500, timeouts 504.
- A save answered not-found no longer replaces the workspace with the
  access page. It is a terminal save error: the workspace stays open
  with the failed save notice, report and reload link. When edit rights
  are lost, the notice says how many changes could not be saved.
- A library sync marked the library synced three seconds later,
  whatever happened to its save. A rejected sync was undone but stayed
  marked: copies stayed out of date and the "updates available" notice
  never came back. The mark now waits for the save, a rollback of the
  sync brings the notice back, and a failed mark (e.g. the user just
  became a viewer) is logged instead of leaving the workspace.
- While saves fail the workspace is read-only. The view-mode banner
  says editing is disabled because changes can't be saved, with the
  Inspect banner's size and bold lead and no Done button. Users can
  still switch pages, pan, zoom and inspect. The lock lifts when a save
  lands and brings back the mode the user had or picked meanwhile; the
  WebGL context lock keeps the workspace read-only if it lasts longer.
  The lock lives in app.main.data.persistence.lock.
- A viewer is never locked. A role change that leaves the user a viewer
  keeps the edits that lost permission, queued and on screen, and shows
  the count notice again. The role change that brings edit rights back
  releases them and rolls them back on screen, as a rejected save would.
  Any other terminal failure is released by the next role change or file
  opened.

The debug faults `io` (socket timeout, 503) and `eof` (500) cover both
sides of the I/O rule.
2026-11-05 23:59:32 +01:00
alonso.torres
f4b20ed08f 🐛 Revert whole user actions in a rollback
A rollback reverts whole undo groups, across files and saves, so that
no user action is left half done. Some actions still split:

- An action that commits several times inside one undo transaction
  (e.g. applying a token to several shapes) gave each commit its own
  group, so a rejection could revert part of it: shapes ended up linked
  to a token whose value was never applied. An undo transaction now
  opens with a commit group that every commit made inside it takes.
- The commit that undoes saved commits of a rejected action joined an
  open transaction's group, so a later rejection there reverted the
  undo too. It gets a group of its own.
- Emptying the open transaction during a rollback dropped its group, so
  its later commits were no longer one unit. It keeps its group.
- Waiting for a save ended as soon as the queue emptied, while later
  commits could still wait in the buffer. Waiters now also wait for an
  empty buffer.

A test covers a token action of three commits in one save whose third
commit is rejected.
2026-11-05 23:59:32 +01:00
alonso.torres
4f42ab1d2d ✨ Keep the valid commits of a save that fails validation
A save whose changes failed validation was rejected as a whole: autosave
stopped, the edits made after it piled up unsent, and a reload lost
them all, the valid ones included.

The frontend now sends each commit of a save as its own group with its
commit id (:changes-with-metadata). When applying and validating all of
them at once fails, the backend searches by bisection for the first
commit that fails, keeps the commits before it and answers with
:rejected (that commit and every later one). Only the kept changes are
stored, snapshotted and broadcast, so other users never see the rejected
ones. Flat :changes and groups without ids stay all-or-nothing; database
and network errors still fail the whole request. A rejection without an
error type is reported as an internal error.

The frontend rolls the file back to what the server holds: it undoes
every pending commit of that file, applies again the remote changes that
arrived meanwhile, and redoes the kept commits. Undoing only the
rejected commits would write stale values over a peer's later change to
the same attribute. The rejected and later commits leave the queue, the
buffer and the undo history, and a warning that hides after ten seconds
tells the user. The pure bookkeeping lives in
app.main.data.persistence.commits.

The pending notice of a commit the rollback dropped no longer leaves the
save status at pending, which made "Pin this version" hang and fail.

Debug tools drive these cases by hand: debug.commitInvalidChange() makes a
save fail validation, holdSaves() delays the answers, failNextSave() and
failNextRollback() fail them on purpose (backend flag debug-save-faults),
and persistenceState() shows the queue.
2026-11-05 23:59:32 +01:00
alonso.torres
ef4d66c3aa 🐛 Apply remote changes under buffered local edits too
A remote commit undoes the pending local commits, applies the remote
changes and replays the local ones, so the local file ends like the
server will: remote first, local last. Only queued commits took part;
the ones still waiting in the persistence buffer (up to ~3s of edits)
stayed under the remote change. When both touched the same attribute,
the remote value won locally but lost on the server.

The buffer now lives in the store ([:persistence :buffer]) instead of
an rx buffer, so the rebase can reach it. A flush merges it per file
into queue entries that keep the list of commits they carry, and the
leave-page guard reads buffer and queue from the store. A buffer left
by a previous session is queued when persistence starts.
2026-11-05 23:59:32 +01:00
Andrey Antukh
97fe51e08b Merge remote-tracking branch 'origin/staging' into develop 2026-11-05 22:43:31 +01:00
Pablo Alba
f4a0d42363
🐛 Keep multi-select variant switches refreshing every instance (#12857)
* 🐛 Keep multi-select variant switches refreshing every instance

Multi variants-switch ended each swap with select-shape, which replaced
the selection, interrupted layout/WASM work, and navigated once per copy
so only one instance looked updated under flex. Skip per-swap select and
layout in the batch, re-read live geometry, coalesce layout ids via a
companion DataEvent, then restore selection once. The same path covers
Assets component-multi-swap. Frontend tests lock select-shape count,
layout coalesce, and mixed no-op selections.

Closes #12829

AI-assisted-by: Composer
2026-11-05 16:52:52 +01:00
Belén Albeza
fa1b3d4708
⚡ Keep only the shape data the worker reads (#12840)
* ⚡ Keep only the shape data the worker reads

The worker kept a full copy of the current page for its selection and
snap indexes. It now keeps only the attributes the indexes and the
change replay read, and re-indexes only the shapes that changed.

On a 52k-shape page the worker heap goes from 698 MB to 286 MB.

Closes #12740

AI-assisted-by: claude-opus-5-5

* ♻️ Share the worker re-trim with its replay test

The worker and its replay test now share `retrim-objects`.

AI-assisted-by: claude-opus-5-5
2026-11-05 16:25:29 +01:00
Belén Albeza
eae2c5bc95
🐛 Fix flaky plugin creation parent test (#12858)
The svg-with-images case asserted that the stubbed rp/cmd! saw only the
URL upload RPC. clear-thumbnail sends :delete-file-object-thumbnails after
a 200 ms timer, so on slow CI runners that call was recorded too and the
assertion failed.

Count only the :create-file-media-object-from-url calls and expect one,
so unrelated RPCs no longer break the test.

AI-assisted-by: claude-opus-5-5
2026-11-05 13:26:19 +01:00
Pablo Alba
7666d7d500 🐛 Fix Creating or combining a variant set renames the component first 2026-11-04 21:44:44 +01:00
Pablo Alba
eeda9c1d18 🐛 Fix renaming a variant set saves half-finished steps 2026-11-04 21:44:44 +01:00
Pablo Alba
d47f366c70 🐛 Fix Creating or combining a variant set saves half-finished steps 2026-11-04 21:44:44 +01:00