* ✨ Add size limits to profile props and plugin registry
Bound the total serialized size of profile settings to 2 MiB
(:profile-props-max-size), checked on the merged result before
persisting, with a controlled :props-too-large error. Profiles
that already exceed the limit can still shrink but cannot grow.
Cap plugin registry entries in the shared schema (code 1 MiB, 50
plugins max, bounded name/host/description/icon) and restore rate
limiting on the plugin RPCs (profile-mutations bucket, one write
at a time per profile). The plugin manager now asks for
confirmation before removal and ignores repeated clicks while a
persist request is in flight.
Closes#11592
AI-assisted-by: muse-spark-1.3-contributor
* 🐛 Enforce plugin count cap, byte sizes and removal guard
Enforce the declared 50-plugin cap in add-profile-plugin with a
specific :too-many-plugins error (updates of existing entries
still pass); the cap lives in a shared max-plugins constant.
Measure profile props size in UTF-8 bytes instead of chars so
multibyte content cannot slip past the limit.
Cover install/remove persist logic with mocked-RPC frontend tests
(release semantics, in-flight dedupe, validation vs rollback
split) and add the missing boundary tests in common.
Expose the in-flight persist set from the plugin registry and
disable the remove button of entries being saved.
Closes#11592
AI-assisted-by: muse-spark-1.3-contributor
* 🐛 Fix rollback loops and restore paths in plugin registry
Restore the previous plugin version instead of dropping the entry
when a validation error rejects an update of an installed plugin.
Make compensating writes one-shot with terminal callbacks so a
persistent failure cannot ping-pong between install and remove.
Restores keep the original list position; the unused public
plugin-persisting? predicate is removed.
Pin count-before-size precedence with a dedicated test and fix
translation source refs to their canonical lines.
Closes#11592
AI-assisted-by: muse-spark-1.3-contributor
* 🐛 Guard notifications write and fix restore ordering
Route update-profile-notifications through check-props-size! so
oversized profiles cannot grow through that path; document the
exempt system writers. Remove the duplicated stale entries in
en.po, keeping the canonical translation refs.
Restore rejected plugin updates at their original list position
instead of leaving the optimistic move in place.
Closes#11592
AI-assisted-by: muse-spark-1.3-contributor
* 🐛 Skip no-op plugin removal and clarify size comments
Return early from remove-profile-plugin when the id is absent:
no wasted write, no size check, and no manufactured :plugins key
that could spuriously fail on oversized profiles.
Clarify that per-field string caps count chars while the byte
budget is enforced by profile-props-max-size.
Closes#11592
AI-assisted-by: muse-spark-1.3-contributor
* 📎 Fix formatting in rlimit.edn for profile operations
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
* 📎 Fix formatting of import-binfile/global entry
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
* ♻️ Simplify props size check and tighten plugin entry caps
Measure props with transit bytes directly instead of the
PGobject string roundtrip.
Rename check-props-size! to check-props-size: single hard limit
on the merged props, no growth comparison, and return props so
writers thread the check into the update.
Move the 2 MiB default into default-props-max-size on the
profile namespace, still overridable with the optional
:profile-props-max-size config entry.
Tighten registry-entry :code and :icon to 500 chars: they hold
manifest paths, not content.
Closes#11592
AI-assisted-by: muse-spark-1.3-contributor
* 🐛 Fix compatibility problems
---------
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
Co-authored-by: alonso.torres <alonso.torres@kaleidos.net>
* 🐛 Attribute audit events to the caller, not the response
prepare-rpc-event took the event profile-id from the result map
whenever it carried one, before falling back to the caller. Any
command returning a response with a :profile-id key silently
credited the action to somebody else.
get-error-report returns the report with its decoded content
merged in, and that content holds the profile that owned the
report, so privileged reads were logged against the users whose
crashes were being inspected. verify-token on a team invitation
returns the inviter's profile-id, so accepting an invitation was
logged against the inviter.
Resolution is now ::audit/profile-id metadata, then
::rpc/profile-id, then the zero uuid; the response is never
consulted. The two verify-token branches that relied on it now
declare the profile in the result metadata. Every other command
either already declared it or returns no :profile-id; all 30
registered command namespaces were checked.
The tests that pinned the old behavior are replaced by ones
covering the new contract.
AI-assisted-by: space-bunny-free
* 🐛 Coerce the audit profile-id override to a uuid
The only sanctioned way for a command to override the profile of an
audit event is the ::audit/profile-id metadata, and the value is set
by hand in a dozen commands, some of them reading it from token
claims or other sources we do not type.
schema:event requires a uuid and submit* swallows the validation
error, so a string did not fail loudly: the row was dropped silently.
Values that cannot become a uuid are now discarded with a warning
and the event falls back to the caller, which is always a valid uuid.
A uuid, the common case, exits on the first check.
AI-assisted-by: space-bunny-free
* 🐛 Allow invitation-based registration when disable-registration is set (#5178)
Per documentation, disable-registration 'disables registration
(still enabled for invitations only)'. Two bugs prevented this:
1. verify_token.clj: when processing an invitation token for a
non-logged-in user with no member-id, the redirect included
registration-disabled? in its condition, sending invited users
to the login page instead of the register page.
2. auth.clj validate-register-attempt!: the registration-disabled
check fired unconditionally before the invitation-token check,
rejecting the actual register RPC even with a valid invitation.
Fix: in verify_token.clj remove registration-disabled? from the
redirect condition for new-user invitations. In auth.clj restructure
the check as an if/else: with an invitation token, validate the token
and allow registration; without one, enforce the flag as before.
* 🐛 Allow registration with disabled public registration
Allow valid team invitations to create new profiles when public
registration is disabled, while keeping password login and invitation
validation required.
Add backend regression coverage for flag combinations and verify-token
redirects, frontend route coverage, and configuration documentation.
Closes#5178
AI-assisted-by: space-bunny-free
* 🐛 Revalidate active invitation during registration
Require a live, unexpired team invitation before using the
registration exception, and recheck it before creating a profile.
Reuse the same lookup in invitation token verification.
Add regression tests for canceled and expired invitations, the
registration race, and explicit redirect contracts. Update docs
and backend auth guidance.
AI-assisted-by: Space Bunny Free
* 🐛 Lock and normalize invitation registration checks
Lock active invitation rows during transactional registration and
acceptance so cancellations cannot race with profile or membership
creation.
Normalize invitation emails before comparisons and database lookups.
Add concurrency, email casing, and final flag regression tests.
AI-assisted-by: Space Bunny Free
---------
Co-authored-by: Sumit Ridhal <sridhal@redhat.com>
* ✨ Send notification email on password change
Add a password-changed email template and send it after every
successful password change or first password set operation. This
gives users a visible signal when a new authentication factor is
established on their account.
Closes#11392
AI-assisted-by: longcat-2.0
* 🐛 Address code review feedback on password notification
- Send password-changed notification from recover-profile too
(forgot-password reset path was missing the email).
- Strengthen test assertions to verify email factory, recipient,
and name via :call-args-list instead of just call-count.
- Add negative test: no email sent when old-password is wrong.
- Wrap pre-existing update-profile-password test with send! mock
to keep its scope focused.
Ref: PR #11393
AI-assisted-by: longcat-2.0
The objects-gc task was performing a hard delete on profiles
without cascading the soft-delete to owned teams, projects, and files.
This left orphaned objects that were never cleaned up.
Now the task invokes delete-object before the hard delete, ensuring
all owned resources are properly marked for deletion and cleaned up
in subsequent GC iterations.
AI-assisted-by: qwen3.7-plus
Omit nil optional profile fields before frontend schema validation and RPC persistence. Preserve omitted language and theme values in backend updates, and add regression coverage for partial profile saves.
AI-assisted-by: gpt-5.6-luna
When a profile is deleted, only the current session was being
invalidated. Other active sessions on different devices remained
functional until the background cleanup task completed.
Add session/invalidate-all helper that deletes all sessions for
a profile by profile_id, and call it from delete-profile before
the response transform. This ensures immediate access revocation
across all devices when an account is deleted.
Closes#11114
AI-assisted-by: qwen3.7-plus
* 🐛 Add backend password validation with complexity rules and dictionary check
Enforce minimum 8-character password length, require at least 1 lowercase
letter, 1 uppercase letter, 1 digit, and 1 special character, and reject
common passwords using Passay library with a 10k-entry wordlist from
SecLists during registration and password change flows.
AI-assisted-by: mimo-v2.5-pro
* ✨ Improve user feedback
When the password is invalid, the user now gets extra indications to make it stronger, so it can be valid.
* 🐛 Fix remove unneeded common password check
The dictionary check is only relevant for passwords that meet all other requirements, but all 10,000 common passwords would fail the character requirements, so this check is not needed
---------
Co-authored-by: Luis de Dios <luis.dedios@kaleidos.net>
Close the profile props schema to reject undocumented keys and add a
denylist for system-managed props like :subscription that should not be
user-writable via RPC.
Changes:
- Add system-managed-props denylist (#{:subscription})
- Close schema:props with :closed true
- Add tests for subscription rejection and valid key acceptance
AI-assisted-by: qwen3.7-plus
* ♻️ Rename nitrate config to admin-console
Rename user-facing configuration from 'nitrate' to 'admin-console':
- Feature flags: :nitrate -> :admin-console, :nitrate-bulk-create-profiles -> :admin-console-bulk-create-profiles
- Config keys: :nitrate-shared-key -> :admin-console-shared-key, :nitrate-backend-uri -> :admin-console-uri
- Shared-keys map entry: :nitrate -> :admin-console (setup.clj + main.clj)
- Env vars: PENPOT_NITRATE_SHARED_KEY -> PENPOT_ADMIN_CONSOLE_SHARED_KEY, PENPOT_NITRATE_BACKEND_URI removed (consolidated into PENPOT_ADMIN_CONSOLE_URI)
- Docker/nginx: PENPOT_NITRATE_URI -> PENPOT_ADMIN_CONSOLE_URI
Code namespaces, file paths, CSS classes, and i18n keys stay as-is.
AI-assisted-by: mimo-v2.5-pro
* ♻️ Rename initialize-user-in-nitrate-organization to initialize-user-in-organization
Part of the nitrate -> admin-console rename series. The function and all 9 references across 6 files have been renamed.
* ♻️ Rename :nitrate-bulk-create-profiles-not-allowed to :bulk-create-profiles-not-allowed
* ♻️ Inline nitrate-permissions into app.common.types.organization
- Delete app.common.types.nitrate-permissions and its test
- Move permission rules (allowed?, can-send-invitations?, etc.) into organization.cljc
- Harmonize all consumers to use alias cto for app.common.types.organization
- Update test runner and create organization_test.cljc
* 🐛 Fix incorrect invitation token handling on register process
- Reject prepare-register-profile when an active profile already
exists for the requested email.
- Stop embedding an existing profile's :profile-id into the
prepared-register JWE. Profile resolution in register-profile is
now done exclusively by email lookup, never by a JWE claim.
- Add created? guard to the invitation-success branch in
register-profile, so existing profiles (active or not) cannot
reach session creation via anonymous registration.
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
* ♻️ Restructure invitation handling inside register-profile
Move the invitation-success branch into the created? sub-cond so it
sits alongside the other post-creation branches, making the control
flow consistent.
- Active new profile + matching invitation: mint session and return
:invitation-token (frontend redirects to :auth-verify-token).
- Not-yet-active new profile + matching invitation: embed the
invitation token inside the verify-email JWE and send the
verification email. When the user clicks the link, they get
logged in and the frontend completes the team-invitation flow.
- Extend send-email-verification! with an optional invitation-token
parameter propagated into the verify-email JWE claims.
- Update the frontend verify-email handler to navigate to
:auth-verify-token when the response carries :invitation-token.
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
* 🐛 Handle email-already-exists error on registration form
Add a specific handler for the [:validation :email-already-exists] error
code in the registration form's on-error callback. The backend raises
this error when an active profile already exists for the requested email,
but the frontend was falling through to the generic error message.
Now it shows the existing "Email already used" i18n message instead of
the generic "Something wrong has happened" toast.
* 🐛 Reset submitted state on registration form error
The on-error handler in the registration form was not resetting the
submitted? state, causing the submit button to remain disabled after
any error. The completion callback in rx/subs! only fires on success,
not on error.
Add (reset! submitted? false) at the beginning of the on-error handler
so the form becomes submittable again after any error, allowing the user
to fix their input and retry.
---------
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
Fixes#9067. Adds a delete button that appears on hover over an
uploaded profile photo; clicking it opens a confirm modal and, on
accept, clears the stored photo so the generated fallback avatar is
shown again. A new :delete-profile-photo RPC schedules the old
storage object for garbage collection and sets photo-id to null.
Signed-off-by: moorsecopers99 <patellscott18@gmail.com>
Co-authored-by: Andrey Antukh <niwi@niwi.nz>
* ✨ Add newsletter opt-in checkbox to registration validation form
Add accept-newsletter-updates support through the full registration
token flow. The newsletter checkbox is now available on the
registration validation form, allowing users to opt-in during the
email verification step.
Backend changes:
- Refactor prepare-register to consolidate UTM params and newsletter
preference into props at token creation time
- Add accept-newsletter-updates to prepare-register-profile and
register-profile schemas
- Handle newsletter-updates in register-profile by updating token
claims props on second step
Frontend changes:
- Add newsletter-options component to register-validate-form
- Add accept-newsletter-updates to validation schema
- Fix subscription finalize/error handling in register form
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
* ♻️ Refactor auth register components to modern style
Migrate all components in app.main.ui.auth.register and
app.main.ui.auth.login/demo-warning to use the modern * suffix
convention, removing deprecated ::mf/props :obj metadata and
updating all invocations from [:& name] to [:> name*] syntax.
Components updated:
- terms-and-privacy -> terms-and-privacy*
- register-form -> register-form*
- register-methods -> register-methods*
- register-page -> register-page*
- register-success-page -> register-success-page*
- terms-register -> terms-register*
- register-validate-form -> register-validate-form*
- register-validate-page -> register-validate-page*
- demo-warning -> demo-warning*
Also remove unused old context-notification import in login.cljs.
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
* 🔥 Remove unused onboarding-newsletter component
The newsletter opt-in is now handled directly in the registration
form via the newsletter-options* component, making the standalone
onboarding-newsletter modal obsolete.
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
* 🐛 Fix register test for UTM params to use prepare-register step
UTM params are now extracted and stored in token props during the
prepare-register step, not at register-profile time. Move utm_campaign
and mtm_campaign from the register-profile call to the
prepare-register-profile call in the test.
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
---------
Signed-off-by: Andrey Antukh <niwi@niwi.nz>
Mainly make it receive the whol cfg/system instead only props. This
makes the api more flexible for a future extending without the need
to change the api again.
The main objective is prevent deletion of objects that can leave
unreachable orphan objects which we are unable to correctly track.
Additionally, this commit includes:
1. Properly implement safe cascade deletion of all participating
tables on soft deletion in the objects-gc task;
2. Make the file thumbnail related tables also participate in the
touch/refcount mechanism applyign to the same safety checks;
3. Add helper for db query lazy iteration using PostgreSQL support
for server side cursors;
4. Fix efficiency issues on gc related task using server side
cursors instead of custom chunked iteration for processing data.
The problem resided when a large chunk of rows that has identical
value on the deleted_at column and the chunk size is small (the
default); when the custom chunked iteration only reads a first N
items and skip the rest of the set to the next run.
This has caused many objects to remain pending to be eliminated,
taking up space for longer than expected. The server side cursor
based iteration does not has this problem and iterates correctly
over all objects.
5. Fix refcount issues on font variant deletion RPC methods
- makes the profile access more efficient (replace in-app joins to a
simple select query on profile table
- add partial support for access-tokens (still missing some RPC methods)
- move router definitions to specific modules and simplify the main http
module definitions to simple includes
- simplifiy authentication code related to access-tokens and sessions
- normalize db parameters with proper namespaced props
- more work on convert all modules initialization to use proper specs
with fully-qualified keyword config props
